Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 46 for “"model-based estimation"”.

  1. Model-based estimation on building envelope infiltration

    … method contains the physical measurements and a model-based estimation. This study is focusing on the model-based estimation part. To estimate building infiltration, a building envelope heat transfer model has to be developed. Recent study shows that a low-ordered three resistance-two capacitance …

    alabama Repository record for Model-based estimation on building envelope infiltration (opens in a new tab)

  2. Dynamic Model-Based Estimation Strategies for Fault Diagnosis

    … In FDD, there are two main perspectives: model-based and data-driven approaches. This thesis centers on model-based methodologies, particularly within the context of control and industrial applications. It introduces novel estimation strategies aimed at enhancing computational efficiency, …

    mcmaster Repository record for Dynamic Model-Based Estimation Strategies for Fault Diagnosis (opens in a new tab)

  3. Model-Based Estimation Applications For Gnss Remote Sensing

    … improve several of these functions by employing model-based estimation techniques. The first algorithm addresses the issue of large uncertainties in the dynamic variations of signal observables due to refraction during Earth limbscanning. It pre-processes raw GNSS data with a Levenberg-Marquardt …

    cornell Repository record for Model-Based Estimation Applications For Gnss Remote Sensing (opens in a new tab)

  4. MODEL-BASED ESTIMATION AND CONTROL FOR LITHIUM-SULFUR BATTERIES

    … states of lithium-sulfur (Li-S) batteries based on an experimentally-parameterized multi-physics model, and (ii) optimizing the discharge trajectory to maximize the energy release of a Li-S battery over a fixed time horizon. This research is motivated both by the potential of Li-S batteries …

    maryland Repository record for MODEL-BASED ESTIMATION AND CONTROL FOR LITHIUM-SULFUR BATTERIES (opens in a new tab)

  5. Model-Based Estimation of Clamp Force in Bolted-Joint Tightening

    … is often impractical. Conventional torquebased tightening methods estimate clamp force by assuming a constant coefficient of friction (CoF). However, the accuracy of this assumption is influenced by surface conditions, lubrication, tightening speed, and other factors. Therefore, accurate …

    chalmers Repository record for Model-Based Estimation of Clamp Force in Bolted-Joint Tightening (opens in a new tab)

  6. Investigating Factors that Influence the Implementation of Model-based Estimation

    Model-based estimation (MBE) has become more common in recent years in the construction industry, with many seeking to capture the potential of Building Information Modeling (BIM). However, MBE is neither utilized as widely as expected nor implemented as efficiently as it could be in current …

    washington Repository record for Investigating Factors that Influence the Implementation of Model-based Estimation (opens in a new tab)

  7. Model-based estimation of AMT vehicle clutch kinetic friction coefficient

    … and temperature effects are involved. A Simulink model of an AMT vehicle was developed first, and a new friction coefficient estimation algorithm was then proposed and validated based on the developed Simulink model. Several case studies are completed for the proposed estimation algorithm and …

    msu Repository record for Model-based estimation of AMT vehicle clutch kinetic friction coefficient (opens in a new tab)

  8. Model-Based Estimation Techniques Applied To Global Navigation Satellite System Jammers

    Model-based estimation techniques have been developed and applied to data collected from real Global Navigation Satellite System (GNSS) jammers. Lowpower civilian GNSS jammers pose a growing threat to the integrity of GNSS timing and navigation, and the present effort develops various …

    cornell Repository record for Model-Based Estimation Techniques Applied To Global Navigation Satellite System Jammers (opens in a new tab)

  9. An analysis of three model-based estimation methods for diesel engine condition monitoring

    … we focus on three main aspects: engine modeling and validation, engine parameter identification, and cylinder pressure waveform reconstruction. The problem of diesel engine modeling is solved using Euler's equation, under the assumption that the crankshaft is perfectly rigid. The model …

    ubc Repository record for An analysis of three model-based estimation methods for diesel engine condition monitoring (opens in a new tab) Download PDF for An analysis of three model-based estimation methods for diesel engine condition monitoring (opens in a new tab)

  10. Online Model-based Estimation for Automated Optical System Alignment and Phase Retrieval Algorithm

    Online model-based estimation is applied to two major applications in optics: Automated optical component alignment and wavefront reconstruction with simultaneous system parameter estimation. Both applications utilize mechanical perturbation in the optical system to generate phase diversity in …

    cornell Repository record for Online Model-based Estimation for Automated Optical System Alignment and Phase Retrieval Algorithm (opens in a new tab)

  11. Model Based Estimation of Road Friction for Use in Vehicle Control and Safety

    … of choice. After integrating the load transfer model with the four wheel vehicle model, the Dugoff tire models are combined with the aforementioned model to represent the plant model. Using the plant model to design an emulator, the sensor measurements are created and these measurements are then …

    vt Repository record for Model Based Estimation of Road Friction for Use in Vehicle Control and Safety (opens in a new tab)

  12. Real-time Model-based Estimation of Transfer Case Clutch Parameters and Traction Torque

    This dissertation provides a clear path for model-based real-time estimation of transfer case clutch parameters and wheel traction torque with improved accuracy for a 4-Wheel-Drive (4WD) vehicle.Transfer case clutch, distributing the traction torque between front and rear tires, is a key component …

    msu Repository record for Real-time Model-based Estimation of Transfer Case Clutch Parameters and Traction Torque (opens in a new tab)

  13. Cyber-enabled manufacturing systems (CeMS) : model-based estimation and control of a solidification process

    … In the past years a new generation of model-based controllers was developed to prevent segregation in VAR by controlling melt rate, or the total amount of power flowing into the liquid pool. These controllers were seen as significant improvements in the industry of remelting processes, …

    texas Repository record for Cyber-enabled manufacturing systems (CeMS) : model-based estimation and control of a solidification process (opens in a new tab)

  14. Model-based estimation and real-time data analysis for well monitoring and early gas kick detection

    … Kick detection methods in use are largely based on monitoring well data from sensors, or alternately, predicting kick variables using numerical models with input data from the well and then corroborating predictions with well sensor data. Where discrepancies occur, they are interpreted as …

    texas Repository record for Model-based estimation and real-time data analysis for well monitoring and early gas kick detection (opens in a new tab)

  15. Model-Based Estimation of the Anisotropic Thermal Properties of Materials from Photothermal Deflection Spectroscopy Data Using Bayesian Inference

    … films on substrates. A comprehensive thermal model is developed for systems with an arbitrary number of films on a substrate that includes the effects of anisotropic thermal conductivity and thermal boundary resistance. Using the thermal model, the beam deflections in a photothermal deflection …

    cornell Repository record for Model-Based Estimation of the Anisotropic Thermal Properties of Materials from Photothermal Deflection Spectroscopy Data Using Bayesian Inference (opens in a new tab)

  16. Model-Based Estimation of the Prevalence of Chronic Hepatitis B in Canada and Cost-Effectiveness Analysis of Implementing a Universal Birth Hepatitis B Vaccination Program in Ontario, Canada

    … of undiagnosed cases in Canada. METHODOLOGY Two models were developed to achieve the study objectives. First, a state-transition model representing the natural history of acute and chronic hepatitis B was developed in TreeAge Pro to assess the cost-effectiveness of two hepatitis B vaccine …

    waterloo Repository record for Model-Based Estimation of the Prevalence of Chronic Hepatitis B in Canada and Cost-Effectiveness Analysis of Implementing a Universal Birth Hepatitis B Vaccination Program in Ontario, Canada (opens in a new tab)

  17. Self-calibrating mass flow sensor

    … the mass flow sensing system, a physics-based model was developed to describe the relationship between the rate of mass flow through the combine and the measured force imparted to the impact plate in terms of mechanical properties of the grains and the interior geometry of the combine. A …

    uiuc Repository record for Self-calibrating mass flow sensor (opens in a new tab)

  18. Statistical models for small area public health intelligence on chronic morbidity

    … allocate funds and monitor health inequalities. Model-based estimation is increasingly perceived as a possible avenue to enhance future local population health statistics methodology. In the UK, model-based small area estimation attracts particular interest both as a possible alternative to …

    soton Download PDF for Statistical models for small area public health intelligence on chronic morbidity (opens in a new tab)

Page 1 of 3