Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 100 for “"moisture uptake"”.
-
Impact of moisture uptake in uncured bond lines on joints performance
… stress concentration on the spotweld. However, moisture and elevated temperature significantly influence adhesive joints' performance. Most research has investigated how uptake moisture in cured bond lines influences the final properties. At Volvo cars, it is essential to understand how the …
-
Moisture Uptake and Loss of Geosynthetic Clay Liners from a Silty Sand Subgrade Under Isothermal Hydration and Thermal Cycles
… leachate. In addition, the components affecting moisture retention or loss of GCLs when subjected to simulated thermal cycles are examined for GCLs that were deconstructed by cutting of the needle-punched fibres to allow each component to be studied in isolation. The findings from column …
-
Predicting the moisture uptake of tablets packaged in semipermeable blister packages and stored under static conditions of temperature and humidity
Thesis (M.S.)--Michigan State University. School of Packaging, 1984
-
Encapsulation and real-time release characteristics of spray dried l-menthol
… matrices were determined by: constructing moisture sorption isotherms, particle sizing, density measurement via pycnometry, and by total and surface menthol content of the finished powders. Real-time menthol release and moisture uptake profiles were accomplished by using dynamic vapor …
-
Investigation of Waterborne Epoxies for E-Glass Composites
… by the aqueous phase of the waterborne resin. Moisture uptake experiments were also performed on epoxy samples that were filled with spherical glass beads as well as multi-ply laminated composites. No increases in the diffusion constant could be attributed to the surfactant. However, the …
-
Durability of Advanced Woven Composites in Aerospace Applications
… project was to evaluate and model the effects of moisture, temperature, and combined hygrothermal aging on the durability of a graphite/epoxy woven composite material system. Imposed environmental and aging conditions were considered to be representative of service conditions for the engine of an …
-
Hygrothermal ageing and its effects on the flexural properties and failure modes of plant oil based composites for maritime applications
This research looks at moisture uptake and its effects on the flexural properties of glass reinforced epoxy, linseed oil and castor oil composites. Water uptake damages the material through chemical, physical and mechanical ageing. At the same time there is a need to reduce the environmental …
-
Plasma polymerized hydrogel thin films for applications in sensors and actuators
… in NIPAAm thin films was found to control the moisture uptake capacity; films prepared at higher substrate temperatures and lower reactor pressures, and hence believed to possess greater crosslink density, showed the highest moisture uptake capacity in ambient humidity. Free volume …
-
Physical and Chemical Stability of Spray Dried Sugars and Protein-Sugar MolecuIar Mixtures for Inhalation
… stability, with respect to particle size, moisture uptake and crystallinity changes, investigated after storage at 23%, 52%, 75% and 93% relative humidity (RH) and 25 °C for 30 days. Two crystalline size fractions (“coarse” = 125-212 μm and “fine” = 44-74 μm) of each sugar, were also …
-
From particle to tablet : understanding long-term physical stability of immediate-release tablets
… tablet properties such as mechanical integrity, moisture uptake, and disintegration performance. This thesis presents a multi-scale investigation into how excipient-level changes, particularly moisture sorption and swelling, determine the stability of directly compressed immediate-release (IR) …
-
Study of Durability of Epoxy Bonded Joints in Aqueous Environments
… to evaluate their mechanical properties. The moisture uptake of the neat epoxy increased with exposure time, and the bending modulus of the neat epoxy decreased with aging time and moisture uptake. It was found that the interfacial shear strength decreased with aging time for both epoxy bonded …
-
Fundamental Importance of Fillers, Cure Condition, and Crosslink Density on Model Epoxy Properties
… Fumed silica did not significantly affect moisture diffusion properties. Next, a linear dilatometer was used to investigate the effects of cure conditions, mold types, and the presence of filler in the model epoxy. These studies revealed that there was substantial shrinkage in the cured …
-
Environmental effects on epoxy adhesive and joints
… data on the degradation of adhesives exposed to moisture or immersed in water, a valuable technique is represented by the open-face configuration. Apart from the acceleration of moisture uptake which is obtained due to the larger area exposed, a further advantage is the uniformity of degradation. …
-
Hyperspectral imaging and chemometrics to investigate the chemical wood modification
… regions of wood may remain susceptible to moisture uptake, dimensional instability, and fungal decay. The identification of regions with insufficient chemical uptake is necessary to develop efficient treatment processes, but standard gravimetric methods are insensitive to the location of …
-
Interaction of Molecular Contaminants with Low-k Dielectric Films and Metal Surfaces
… interactions with gaseous contaminants, such as moisture and isopropanol, and the resulting change in their properties. Moisture retained in the film not only has detrimental effect on the k value of the film but also causes reliability and adhesion problems due to gradual outgassing. The …
-
SYNTHESIS AND CHARACTERIZATION OF FULLERENE-BASED NANOPARTICLE COMPOSITES FOR MOLDING COMPOUND APPLICATION
… temperature, good physical stability, and low moisture uptake. Further development may lead to the successful engineering of unique optical and electronic properties. In this work, a detailed study of how the incorporation of carbon nanoparticles in the form of fullerenes affects the …
-
DESIGN AND DEVELOPMENT OF POTASSIUM FORMATE BASED ATMOSPHERIC WATER HARVESTER
… formate as the medium for absorption of moisture during the night when the relative humidity is high and (ii) solar energy for removal of absorbed moisture from the desiccant solution during the day. A prototype was built and a performance of 1.9 kg/m2/day with a moisture uptake of 0.34 …
-
Influence of Hygrothermal Conditions of the Bistability of Asymmetric Carbon Fiber Laminate Composites
… harvesting. Existing research shows that both moisture and temperature affect the material properties and behavior of CFRP laminates, however, the influence of moisture absorption on the bistability of carbon fiber composites has not been well studied. This study investigates the effects of …
Page 1 of 5