Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 1917 for “"molten"”.
-
Molten Salt for Molten Salt Reactors (MS4MSRs) : A thermodynamic exploration and characterisation of alternative nuclear molten fuel salt systems
… thermodynamic investigation of alternative molten salt systems for use in both thermal- and fast-spectrum molten salt reactors (MSRs). The work integrates new experimental data with advanced thermodynamic modelling to establish a consistent and validated database for both fluoride- and …
-
Molten Salt Technologies for Advanced Nuclear Fuel Cycles and Molten Salt Reactors
… techniques often cited in the literature for molten salt systems and designs for nuclear engineering applications. First, we explored commonly used materials for quasi-reference electrodes in molten chloride salts. Second, the limitations of the electrochemical analysis known as cyclic …
-
Dephosphorization of molten iron
Electronic Thesis
-
Corrosion Behavior of High Entropy Alloys in Molten Chloride and Molten Fluoride Salts
… a new paradigm in structural alloy design. Molten salt corrosion behavior was studied for single-phase HEAs such as TaTiVWZr and HfTaTiVZr, and multi-phase HEAs such as AlCoCrFeNi2.1. De-alloying with porosity formation along the exposed surface and fluxing of unstable oxides were found to …
-
MOLTEN ALUMINUM CAPILLARY HOLE-FILLING
The presence of micrometeoroids and space debris in open space raises the question of a mitigation of the damage caused by a possible impact on the man-made structures such as space shuttles, satellites, and the International Space Station. A method achieving metallic sealed hole would be of an …
-
Die swell in molten polymers
<p>The die swell of six polymer melts was measured and the melts were rheologically characterized. The materials studied were high density polyethylene of melt indices 5, 0.1 and 0.02, low density polyethylene, polystyrene and polypropylene.</p><p>The die swell was measured in four different ways: …
-
Electrochemical Measurements in Molten Fluorides
… couple was shown to obey the Nernst equation in molten LiF-NaF-KF (46.5-11.5-42.0 mole per cent) and LiF-BeF<sub>2</sub>-ZrF<sub>4</sub> (65.6-29.4-5.0 mole per cent). It was found that in some cases the reference electrode had a significant junction potential across the boron nitride wall.</p> …
-
Voltammetric studies in molten salts
… onto platinum from aqueous solutions and from molten alkali nitrates using the linear sweep technique and measurement of step-function transients. The nature and role of the platinum oxide film and its effect upon the rate of new phase formation on it have been studied. The investigations …
-
Thermoelectric generation using molten salts
… values between 0.5 and 1, and the most suitable molten salts developed in this work have ZT values of about 0.5. The advantages of molten salt cells over semiconductol' thermoelements are the absence of conta.ct junction, doping and thermal expansion problems, and the low cost of the materials. …
-
Molten Salt Thermal Properties Database – Thermochemical Development and Thermodynamic Assessment of Various Molten Salt Systems
The Molten Salt Thermal Properties Database – Thermochemical (MSTDB-TC) is a validated open-source database for thermochemical modeling of molten salt reactor (MSR) relevant fluoride and chloride salt systems. The database has been created and populated by leveraging available models from …
-
High-temperature interactions and property analysis in molten regolith electrolysis: refractory selection and molten oxide behavior
… This study contributes to the NASA-funded Molten Aluminum Generation for Manufacturing Additively (MAGMA) LuSTR grant, aimed at extracting metals from lunar regolith for construction purposes. The research focuses on material compatibility between refractory ceramics and molten oxide …
-
Dynamics Modeling of Molten Salt Reactors
… are a type of advanced reactor that uses molten alkali halide salts as both the coolant and the fuel matrix. \ac{msr} remain as understudied systems with complex dynamic behaviors. Non-linear dynamic simulations allow modeling complex systems such as \acp{msr}. Non-linear modeling as such …
-
Yield stress studies on molten chocolate
… a more accurate estimate of the yield value of molten chocolate because the assumption of a uniform shear stress distribution over the ends of the vane fixture could not be proven experimentally for samples HSS and H1 when using Method I. Also, the dependence of the yield value on the rotational …
-
Melt fracture behaviour of molten polypropylenes
Experiments were carried out in both sliding plate and capillary I rheometers with two polypropylene resins to determine the conditions for the onset of slip, surface and gross melt fracture. It was found that there was no distinction between surface and gross melt fracture, which is commonly …
-
Oxidation kinetics of molten copper sulphide
The oxidation kinetics of molten copper sulphide were investigated by quantitative measurements and qualitative observations. Off-gas analyses for SO2 and 02 were conducted to determine the oxidation rates of approximately 200-gram samples, ofmolten 99.5% Cu2S. The molten sulphide was held in …
-
Electrochemical Studies of Molten Salt Corrosion
… and Ni-22Cr model alloy were investigated in molten chloride salts at 350-700 °C, simulating the heat transfer circuits of molten salt reactors and thermal solar plants.This study revealed that corrosion properties in molten Cl salts depends on homologous temperatures, metallic solid-solution …
Page 1 of 96