Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 141 for “"mullite"”.
-
Microstructure development in alkoxide-derived mullite and mullite/zirconia composites
Made available in DSpace on 2011-05-07T13:05:51Z (GMT). No. of bitstreams: 2 license.txt: 4922 bytes, checksum: 910b249b4beec47e7ab768910c8f966f (MD5) 9503362.pdf: 6061044 bytes, checksum: a80d4cfd87ff6cfa07c6e501b0ab11c4 (MD5) Previous issue date: 1994
-
Mullite-mullite environmental barrier coatings on silicon nitride by composite sol-gel
… environmental barrier coatings (EBC) maybe used. Mullite has high corrosion resistance, high temperature strength, and its thermal expansion (CTE=4.5-6 x 10⁻⁶ /°C), is relatively close to that of Si₃N₄ (CTE=3.3 x 10⁻⁶ /°C). However, the CTEs still differ by a factor of 1.4-2, thus it is difficult …
-
Kaolinite - mullite high temperature phase transformations
Includes bibliographical references.
-
Thermal expansion of chemically modified mullite
… used extensively to form chemically-modified mullite solid solutions in an effort to lower their thermal expansion coefficients. TiO₂, B₂O₃, CrPO₄, P2O₅, Ga₂O₃, Cr2O₃, and WO₃ and the half-breed SiO₂ compounds AlPas, BPO₄, GaPO₄, BAsO₄, AIAsO₄, GaAsO₄, and GeO₂ were chosen as the modifiers. …
-
Simulation of Microwave Heating of Mullite Rods
Microwave processing has been studied as an alternate heating technique over conventional heating for industrial applications. Some advantages include quicker and more uniform heating. Also, microwave energy offers the advantage of localized heating and smaller-sized equipment. Many ceramics, …
-
Growth of Textured Mullite Fibers Using Polycrystalline Precursors
Mullite whiskers were prepared by HF leaching and templated into polycrystalline mullite fibers by extrusion. Textured growth of mullite fibers with elongated grains, aligned along the long-axis of the fibers, was achieved by heat treatment. Repeated heat treatment cycles of a whisker-templated …
-
The characterisation of mullite-related phases by hydrothermal synthesis
The aluminosilicate called mullite has been prepared by hydrothermal processing from aluminium- and silicon- acetates. The phase evolution of the products and the mechanism of formation of mullite from its precursors has been examined by x-ray powder diffraction, magic-angle spinning NMR …
-
Indirect selective laser sintering of an apatite-mullite glass-ceramic
… crystallises to a glass-ceramic with apatite and mullite phases was produced, ground to a powder and blended with an acrylic binder at various ratios by mass. An experimental sinterstation with a 250W CO2 laser was used to determine the viability of indirectly sintering the glass ceramic across a …
-
Kinetics and Pathways for Crystallization of Amorphous Mullite and YAG
Pseudotetragonal mullite gradually converted to equilibrium, orthorhombic, 3:2 mullite between 1000--1400°C. This was characterized by assimilation of the embedded, silica-rich inclusions and the elimination of internal strain. Additionally, recrystallization of numerous, small, strain- and …
-
Thermal conductivity/diffusivity of SiC-Mullite and SiC-SiC composites
… diffusivity and/or thermal conductivity of SiC-Mullite and SiC-SiC, and to explain the observed behavior in terms of changes in temperature, microstructure, composition, and/or orientation. Materials used in the SiC-Mullite study consisted of single crystal SiC whiskers (prepared from rice hulls …
-
Microstructural development, phase stability, and toughening in mullite matrix composites
Mullite matrix composites with partially stabilized zirconia and/or SiC whiskers were fabricated by hot pressing of powders which had been prepared from Al, Si, Zr, and Mg (or Y) alkoxide precursors by a sol-gel process. A series of studies were conducted on microstructural evolution, oxidation …
-
MOFs functionalization of 3D printed mullite architectures: hierarchically porous systems for CO2 capture
L'abstract è presente nell'allegato / the abstract is in the attachment
-
Mullite Whisker Enhanced Zirconia Toughened Alumina Ceramic Matrix Composite for High Temperature Applications
… enhanced by the incorporation of single crystal mullite whiskers due to their stability in oxidizing atmospheres at high temperatures. Mullite whiskers are grown through the molten salt method and incorporated into the ZTA matrix using a colloidal processing route. The addition of whiskers to ZTA …
-
Processing, microstructure and mechanical properties of alumina platelet reinforced 3Y-TZP and mullite composites
Ceramic matrix composites consisting of mullite and 3Y-TZP containing alumina platelet reinforcements were fabricated by suspension processing and pressureless sintered. The effect of the matrix on the microstructural development in the presence of alumina platelets were characterized. A systematic …
-
High Pressure Behavior of Mullite-Type Oxides: Phase Transitions, Amorphization, Negative Linear Compressibility and Microstructural Implications
Even though mullite occurs rarely in nature, it is perhaps one of the most important phases in both traditional and advanced ceramics. Existing and emerging applications of mullite and mullite-type materials include: high-temperature composites, aerospace materials, ballistic shielding for military …
Page 1 of 8