Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 13 of 13 for “"multi-component fuel"”.
-
Generating Reduced Mechanisms for Realistic Multi-Component Fuel Combustion
… combustion while simultaneously increasing fuel efficiency and optimizing engine performance calls for the use of numerical simulations in parallel with, or in lieu of, expensive and time-consuming experiments. To explore the efficacy of emerging alternative fuels and additives in numerical …
-
Modeling of Multi-Component Fuel Vaporization for Spray Simulations Using Continuous Thermodynamics
… by its potential application for improving air-fuel mixing and understanding the possible drop-bubble breakup mechanism.
-
Modeling of biofuel-diesel multi-component fuel effects on vaporization, micro-explosion and combustion
In the effort to reduce air pollution and fossil fuel dependence in automotive and related sectors, internal combustion engine (ICE) designs are optimized for high efficiency and low pollutant emissions, and alternative biofuels are used in ICE mixing with conventional petroleum based fuels. One …
-
Diesel spray mixing limited vaporization with non-ideal and multi-component fuel thermophysical property effects
… transportation. Challenges exist in meeting fuel consumption regulations and emission standards while upholding performance, as fuel prices rise, and resource depletion and environmental impacts are of increasing concern. Diesel engines are advantageous due to their inherent efficiency …
-
Laminar burning velocities and laminar flame speeds of multi-component fuel blends at elevated temperatures and pressures
… speed model was successfully applied to these fuels. Ethanol and ethanol blends with iso-octane and/or n-heptane exhibited a strongly non-linear blending relationship and the new flame speed model was not applied to these fuels. It was shown that the addition of ethanol into iso-octane and/or …
-
CFD simulations of mixing processes in Direct Injection SI engines
… In this thesis the effects of varying piston and fuel temperatures on mixing process and fuel film mass on the piston surface were studied using CONVERGE CFD soft ware. The simulations were performed by selecting a single component (iso-octane) and a multi-component fuel blend (iso-octane, …
-
Experimental Modelling of Black Carbon Emissions from Gas Flares in the Oil and Gas Sector
… examined the effects of flow conditions and fuel chemistry on the soot emissions from turbulent buoyant diffusion flames burning methane-dominated alkane fuels mixtures representative of upstream oil and gas sector flares. Soot (elemental carbon) in the captured plumes was measured via …
-
Development and application of numerical models for simulating bio-oil gasification
… to syngas, and upgrade syngas to transportation fuels and other high-value chemicals. In this study, a comprehensive numerical model was developed to simulate the gasification of bio-oil at different operating conditions and different reactor geometries.</p> <p>The present model considers spray, …
-
Qualitative measurements of pressure-atomized sprays through simultaneous collection of planar fluorescence, phosphorescence, and Mie scattering data
… and liquid structures of a pressure atomized fuel spray is examined. While Mie scattering is sensitive to the liquid phase within a spray, planar laser-induced fluorescence is sensitive to both the liquid and vapor phases. Hence, a comparison of images utilizing these two techniques could be …
-
Optical diagnostics and combustion analysis in a gasoline direct injection engine
… and burn with lean mixtures in order to save fuel, whilst at full load, the fuel and air mix homogeneously for maximum power output. The higher compression ratio and the absence of throttling are two of the most significant benefits of GDI engines. The key issues facing GDI combustion include …
-
A COMBUSTION MODEL FOR MULTI-COMPONENT FUELS BASED ON RELATIVE REACTIVITY AND MOLECULAR STRUCTURE
A reliable multi-component surrogate fuel model needs to be able to represent both physical properties and chemical kinetics of a real fuel. However, enhancing the fidelity of a model with detailed description of physical and chemical behavior of all fuel components found in real fuels is limited …
-
Mixture preparation and injection strategy in direct injection spark ignition engines
… penetration, and experimental investigation of fuel sprays in an optical spray chamber and an optical engine. Assessments of the suitability of different sub-models for spray simulation were needed, in order to capture enough of the spray physics and fuel behaviour to aid correct prediction of …
-
An Investigation of Lean Blowout of Gaseous Fuel Alternatives to Natural Gas
… work examines lean premixed flame stability for multi-component fuel mixtures to support fuel flexibility for industrial combustors. A single Jet Stirred Reactor (JSR), a generic recirculation stabilized combustor, along with gaseous fuels of hydrogen, methane, and hydrogen/methane blends are …