Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 1006 for “"multi-functional"”.

  1. Reconfigurable and multi-functional antennas

    This thesis describes a research into multi-frequency and filtering antennas. Several novel antennas are presented, each of which addresses a specific issue for future communication systems, in terms of multi-frequency operation, and filtering capability. These antennas seem to be good candidates …

    birmingham Download PDF for Reconfigurable and multi-functional antennas (opens in a new tab)

  2. Multi-functional piezoelectric acoustic metamaterials

    <p>This work aims to develop multi-functional planar piezoelectric acoustic metamaterials connected to external circuits for both noise insulation and energy harvesting, providing a straightforward analytical approach and an in-depth understanding of basic mechanisms into acoustic, structure and …

    oxford Restricted access

  3. Hydrogenation of multi-functional compounds

    Selective hydrogenation of a multi-functional compound to achieve high yield of a particular product is often involved in the production of fine chemicals and pharmaceuticals. The control of selectivity can be difficult and can be affected by a number of variables such as the interaction of the …

    glasgow Download PDF for Hydrogenation of multi-functional compounds (opens in a new tab)

  4. 3D PRINTING OF MULTI-FUNCTIONAL HYDROGELS

    … of hydrogels provides the potential to produce multifunctional structures with hydrogels of different formulations and properties. Herein, we reported two works of 3D printing of multifunctional hydrogels by direct ink writing, a 3D printing technology based on the rheological properties of the …

    jhu Repository record for 3D PRINTING OF MULTI-FUNCTIONAL HYDROGELS (opens in a new tab)

  5. Multi-Functional Programmable Shape Morphing Architectures

    … programmable mechanical behavior, and multistability during shape change. Shape morphing can be enabled through architected mechanical metamaterials that integrate building blocks with prescribed mechanical and material responses. This dissertation proposes several design strategies for …

    houston Repository record for Multi-Functional Programmable Shape Morphing Architectures (opens in a new tab) Embargoed until 2028-08-01

  6. Water Based Polyurethane Multi-Functional Composites

    … matrix to develop a variety of ink systems for multiple applications. Firstly, to investigate the application of WPU in flexible and stretchable electronics, we develop a WPU-silver and WPU-polypyrrole (PPy) conductive ink for textile. The effective penetration of obtained ink makes the textile …

    waterloo Repository record for Water Based Polyurethane Multi-Functional Composites (opens in a new tab)

  7. A multi-functional collaborative design environment

    … for the construction sector that can allow multi-functional team members to come together to visualise, explore, assess and design optimised building solutions. It resulted in creating a collaboration platform that integrates multi-functional interfaces allowing teams to explore the design …

    salford Download PDF for A multi-functional collaborative design environment (opens in a new tab)

  8. Time Sharing: The Multi-Functional Office

    … a major factor in the design. As a result, the Multi‐ Functional office will look at current workplaces that encourage new space developments to improve conditions that are imposed by limited office space. Once the real estate is acquired by the client, the architect has to satisfy all program …

    hawaii Repository record for Time Sharing: The Multi-Functional Office (opens in a new tab)

  9. Multi-functional PAN based composite fibers

    … of use. These composites can be used to produce multi-functional fibers as the next generation textile or fabrics. In this research, Polyacrylonitrile (PAN) is adopted as the main polymer with different nano-fillers, such as carbon nanotube (CNT), iron oxide nanoparticle, and graphene oxide …

    gatech Repository record for Multi-functional PAN based composite fibers (opens in a new tab)

  10. Multi-functional cyclopentadienyl complexes for theranostic applications

    zurich

  11. Multi-functional chromatography materials: new designs & applications

    … waste generation. Incremental changes in mono-functional chromatography media do not appear to be sufficient in coping with these increased demands and opens the door for novel ‘multifunctional’ beaded media, designed from the ground up, to posit a solution. This work will, in part, demonstrate …

    birmingham Download PDF for Multi-functional chromatography materials: new designs & applications (opens in a new tab)

  12. Technology impact forecasting for multi-functional composites

    Low technology readiness levels (TRL) technologies are attractive to the aerospace industry because their maturation cycles can happen simultaneously with the development lifecycle of the aircraft. However, due to the limited knowledge about a new technology in system evaluation, a low TRL …

    qu-belfast Repository record for Technology impact forecasting for multi-functional composites (opens in a new tab) Download PDF for Technology impact forecasting for multi-functional composites (opens in a new tab)

  13. Smart mechanical metamaterials for multi-functional applications

    … under severe loading conditions, insufficient multifunctionality, and limited post-fabrication programmability. This thesis aims to develop novel mechanical metamaterial designs and mechanisms to overcome these limitations by achieving enhanced mechanical performance, improved structural …

    manitoba Repository record for Smart mechanical metamaterials for multi-functional applications (opens in a new tab)

  14. In-Mold Assembly of Multi-Functional Structures

    … injection moldable polymer composites with the multi-material molding techniques enable fabrication of multi-functional structures to serve multiple functions (e.g., carry load, support motion, dissipate heat, store energy). Current in-mold assembly methods, however, cannot be simply scaled to …

    maryland Repository record for In-Mold Assembly of Multi-Functional Structures (opens in a new tab)

  15. MULTI-FUNCTIONAL NANOSTRUCTURED FILMS FROM CELLULOSE NANOFIBERS

    … Based on these properties, we fabricated functionalized nanostructured films from CNF and observed promising results from the novel materials.

    maryland Repository record for MULTI-FUNCTIONAL NANOSTRUCTURED FILMS FROM CELLULOSE NANOFIBERS (opens in a new tab)

  16. MULTI-FUNCTIONAL MODULAR BIO-INSPIRED UNDULATING ROBOT

    … intrusion. In this study, we present a multifunctional bio-inspired robotic module, inspired by the efficient filter-feeding mechanism of the Giant Larvacean, for active particle-laden fluid suction. The design is fundamentally based on the fluid–structure interaction of a flexible …

    cornell Repository record for MULTI-FUNCTIONAL MODULAR BIO-INSPIRED UNDULATING ROBOT (opens in a new tab) Embargoed until 2027-06-18

  17. MULTI-FUNCTIONAL MODULAR BIO-INSPIRED UNDULATING ROBOT

    … intrusion. In this study, we present a multifunctional bio-inspired robotic module, inspired by the efficient filter-feeding mechanism of the Giant Larvacean, for active particle-laden fluid suction. The design is fundamentally based on the fluid–structure interaction of a flexible …

    cornell Repository record for MULTI-FUNCTIONAL MODULAR BIO-INSPIRED UNDULATING ROBOT (opens in a new tab) Embargoed until 2027-06-18

  18. Designing and testing multi-functional robot gripper

    This paper analyzes how multi-functional gripper tool can be designed and implemented into the assembly process of battery fuse box. To answer this question, 6 steps methodology has been used to construct the thesis in a structural way. The purpose of designing multi-functional gripper tool is to …

    chalmers Repository record for Designing and testing multi-functional robot gripper (opens in a new tab)

Page 1 of 51