Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 60 for “"multiaxial loading"”.

  1. Impact behaviour of concrete under multiaxial loading

    … testing of concrete under different types of loading conditions (compression, tension and bending) has been carried out worldwide. However, it has been found that the results are mostly not comparable due to the differences in testing techniques and specimen configurations. In this study, a …

    ubc Repository record for Impact behaviour of concrete under multiaxial loading (opens in a new tab) Download PDF for Impact behaviour of concrete under multiaxial loading (opens in a new tab)

  2. Response of lightly cemented sand under multiaxial loading

    … of the mechanisms of soil response to multiple loadings is still not fully known. Previous studies have shown that even small amounts of cement add to the soil characteristics as strength, reduction to liquefaction potential, durability and lower deformability. This thesis presents experimental …

    brazil-ufrgs Repository record for Response of lightly cemented sand under multiaxial loading (opens in a new tab)

  3. Nonlinear Fatigue Damage Accumulation in Aircraft Engine Alloys Multiaxial Loading

    … studies on fatigue have been limited to uniaxial loading cases with a primary focus on constant amplitude cycles. A detailed exploration of multiaxial fatigue under constant and variable amplitude loading scenarios for a wide variety of aircraft engine alloys has been performed in this study, and …

    ndsu Repository record for Nonlinear Fatigue Damage Accumulation in Aircraft Engine Alloys Multiaxial Loading (opens in a new tab)

  4. Estimation of fatigue life under multiaxial loading: modelling and experimentation

    This doctorate research project investigates the multiaxial deformation and fatigue behaviour of two Nickel-based superalloys used in the discs of aero-engines, named Waspaloy and RR1000, under proportional and non-proportional loading conditions. For that a systematic analysis has been performed …

    oxford Repository record for Estimation of fatigue life under multiaxial loading: modelling and experimentation (opens in a new tab)

  5. Ductile Fracture Criteria in Multiaxial Loading – Theory, Experiments and Application

    Práce se zabývá tvárným lomem, který je výsledkem víceosého kvazi-statického monotónního namáhání doprovázeného rozsáhlými plastickými deformacemi, přičemž pro degradaci materiálu je uvažován lokální přístup. Ve výpočtech o rozvoji poškození rozhodují použité mezní podmínky tvárného lomu. Tyto byly …

    brno-tech Repository record for Ductile Fracture Criteria in Multiaxial Loading – Theory, Experiments and Application (opens in a new tab)

  6. A Comparison of Creep Theories for Multiaxial Loading of Polyethylene

    Made available in DSpace on 2014-12-10T17:25:50Z (GMT). No. of bitstreams: 1 7000804.pdf: 1426540 bytes, checksum: a877de17f78c48170e56a4a983f453da (MD5) Previous issue date: 1969

    uiuc Repository record for A Comparison of Creep Theories for Multiaxial Loading of Polyethylene (opens in a new tab)

  7. Experimental And Theoretical Investigation Of Sic/Sic Composites Under Multiaxial Loading

    … the behavior of SiC/SiC composites under multiaxial stress states and developing a probabilistic approach for evaluating the structural vulnerability is of paramount importance for reliability-based analysis and design of SiC/SiC composite claddings. So far, there has been very limited …

    umn Repository record for Experimental And Theoretical Investigation Of Sic/Sic Composites Under Multiaxial Loading (opens in a new tab)

  8. Mechanical Strength of Sic Composite Tubing Under Uniaxial and Multiaxial Loading

    … strength under uniaxial and multi-axial loading situations. This will be accomplished by compiling testing results for multiple uniaxial and multiaxial testing scenarios. These include, burst testing, axial testing, torsion testing, torsion-burst testing, and tension-torsion testing. By …

    south-carolina Repository record for Mechanical Strength of Sic Composite Tubing Under Uniaxial and Multiaxial Loading (opens in a new tab)

  9. Modeling of Localized and Structural Fatigue Damage Under Complex Multiaxial Loading

    … as the large number as well as complexity of loading cycles seen by the part during service. Methods in the time domain were the first to be used to model the progress of fatigue. Current techniques (typically an amalgamation of notch correction, elastic-plastic modeling scheme, cycle count, …

    tamu Repository record for Modeling of Localized and Structural Fatigue Damage Under Complex Multiaxial Loading (opens in a new tab)

  10. Failure strength and mechanism of composite laminates under multiaxial loading conditions

    … (BCC(n)) were tested in a biaxial compression loading condition to study failure behavior of notched laminates under a biaxial stress state. Failure mechanisms of notched and unnotched composite laminates have been studied based on the test data and failure surface examination.

    uiuc Repository record for Failure strength and mechanism of composite laminates under multiaxial loading conditions (opens in a new tab)

  11. EXPERIMENTS AND MODELING OF PLASTIC ANISOTROPY AND DUCTILE FRACTURE UNDER MULTIAXIAL LOADING

    … point to remain proportional throughout the loading history. Likewise, the fracture behavior of the tubes is assessed by loading them under axial force and internal pressure along different stress paths. The ability to control the force/pressure ratio enables probing the fracture behavior …

    unh-thes Repository record for EXPERIMENTS AND MODELING OF PLASTIC ANISOTROPY AND DUCTILE FRACTURE UNDER MULTIAXIAL LOADING (opens in a new tab)

  12. Comprehensive analysis of cemented mine tailings granular materials anisotropy under multiaxial loading

    … and (ii) ordinary sand, when subjected to multiaxial loading conditions. Unconfined compressive, splitting tensile, ultrasonic pulse velocity, triaxial, and true triaxial tests were carried out to a wide range of dry unit weights (16.0, 16.5, 17.5, 19.0, 20.5, and 22.0 kN/m³) and ordinary …

    brazil-ufrgs Repository record for Comprehensive analysis of cemented mine tailings granular materials anisotropy under multiaxial loading (opens in a new tab)

  13. Microscale Initiation And Propagation Of Yielding In Duplex Stainless Steel Under Multiaxial Loading

    … and macroscopic yielding is explored for biaxial loading of dual phase alloys. In particular, dual phase austenitic-ferritic stainless steel LDX-2101 is studied. However, the analysis is generally applicable to a range of single and dual phase alloys. Combined neutron diffraction experiments and …

    cornell Repository record for Microscale Initiation And Propagation Of Yielding In Duplex Stainless Steel Under Multiaxial Loading (opens in a new tab)

  14. Mechanism-based understanding of the plastic deformation of a magnesium alloy under multiaxial loading

    … metals are likely to experience extreme loading such as car crashes, bird strikes, ballistic impacts and high speed machining. It is well known that materials behave differently when undergoing extreme loading in comparison to quasi-static loading. However, polycrystalline magnesium …

    jhu Repository record for Mechanism-based understanding of the plastic deformation of a magnesium alloy under multiaxial loading (opens in a new tab)

  15. A variable amplitude multiaxial fatigue life prediction method

    … of a component subjected to variable amplitude multiaxial loading has been developed. It is based upon an extension of the strain-life approach which achieved success in correlating the fatigue lives of components subjected to uniaxial variable amplitude loading. In addition, it incorporates …

    uiuc Repository record for A variable amplitude multiaxial fatigue life prediction method (opens in a new tab)

  16. Change in elastic properties of sands under very large number of low amplitude multiaxial cyclic loading

    … subjected to millions of complex and irregular loading cycles during the design life. OWTs are subjected to continuous cyclic loading originating from both environmental (wind and wave) and operational sources (rotors dynamics), having variable frequencies, amplitudes and loading directions. …

    bristol Repository record for Change in elastic properties of sands under very large number of low amplitude multiaxial cyclic loading (opens in a new tab) Download PDF for Change in elastic properties of sands under very large number of low amplitude multiaxial cyclic loading (opens in a new tab)

  17. Fatigue of Forged AZ80 Magnesium Alloy

    … have complex geometries and undergo highly multiaxial loading. This is partly due to the packaging constraints imposed by the many dynamic systems within a vehicle, and the impetuous towards lightweighting to improve efficiency and reduce greenhouse gas emissions. As such, the current …

    waterloo Repository record for Fatigue of Forged AZ80 Magnesium Alloy (opens in a new tab)

  18. Μηχανική συμπεριφορά και διάρκεια ζωής κατασκευαστικών στοιχείων σε πολυαξονική κόπωση

    … and fatigue life of engineering components under multiaxial fatigue. This aim has been achieved using state of the art programming tools and engineering software packages. The proposed method has been evaluated by comparing its results with corresponding experimental data. The elastic-plastic …

    greece Repository record for Μηχανική συμπεριφορά και διάρκεια ζωής κατασκευαστικών στοιχείων σε πολυαξονική κόπωση (opens in a new tab)

Page 1 of 3