Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"multiple cavities"”.

  1. PRESSURE MEASUREMENTS INSIDE MULTIPLE CAVITIES OF A TORQUE CONVERTER AND CFD CORRELATION

    … The pressure transducers were located in multiple cavities. The instrumented cavities included, four transducers mounted on the impeller shell, on the channel between blades. Six transducers mounted on the pressure and suction sides on the middle streamline of a turbine blade. Another …

    mtu Repository record for PRESSURE MEASUREMENTS INSIDE MULTIPLE CAVITIES OF A TORQUE CONVERTER AND CFD CORRELATION (opens in a new tab)

  2. Investigation of the effect of two-dimensional cavities on boundary layers in an adverse pressure gradient

    … one aspect of the feasibility of the use of multiple cavities as an airfoil high-lift device. The effects of cavities on the boundary layer characteristics in several pressure gradients were determined experimentally and computationally. Experimentally, it was found that up to four cavities …

    nps Repository record for Investigation of the effect of two-dimensional cavities on boundary layers in an adverse pressure gradient (opens in a new tab)

  3. Computational and experimental study of intense shock-cavity interactions

    … the interaction of shock waves with air-filled cavities in a liquid. At the incident shock pressures studied, this process leads to the formation of high-speed jets which propagate across the cavities, causing them to collapse. This phenomenon is modelled numerically using a front-tracking …

    oxford Repository record for Computational and experimental study of intense shock-cavity interactions (opens in a new tab)

  4. Secondhand Homes: How a Primary Cavity Nester May Influence the Local Avian Community

    … engineers by excavating, and then abandoning multiple cavities in dead and live trees throughout their lifetime. These cavities can be crucial to secondary cavity nesting (SCN) birds that are otherwise limited by the availability of naturally occurring cavities. Additionally, woodpeckers have …

    tamu Repository record for Secondhand Homes: How a Primary Cavity Nester May Influence the Local Avian Community (opens in a new tab)

  5. Modeling of Ultrasonic and Terahertz Radiations in Defective Tiles for Condition Monitoring of Thermal Protection Systems

    … of focused ultrasonic fields by single and multiple cavities in fluid&solid media is studied. A comparison between the radiation forces generated by the ultrasonic energies reflected from two small cavities versus a single big cavity is also carried out.

    arizona-thes Repository record for Modeling of Ultrasonic and Terahertz Radiations in Defective Tiles for Condition Monitoring of Thermal Protection Systems (opens in a new tab)

  6. Formation and collapse of non-wetting cavities in soft porous media

    … displace solid to form macroscopic (open) cavities. An increase in the confining stress can suppress the formation of cavities and even trigger the collapse of existing cavities, forcing the non-wetting fluid into the pore space. A quantitative understanding of the total volume of …

    oxford Repository record for Formation and collapse of non-wetting cavities in soft porous media (opens in a new tab)

  7. Wave Front Sensing and Correction Using Spatial Modulation and Digitally Enhanced Heterodyne Interferometry

    … it to maximise the amount of power in the arm cavities during operation and reduce noise, while space based missions such as the Laser Interferometer Space Antenna (LISA) will use it to align distant partner satellites and ensure that the maximum amount of signal is exchanged. Conventionally …

    anu Repository record for Wave Front Sensing and Correction Using Spatial Modulation and Digitally Enhanced Heterodyne Interferometry (opens in a new tab)

  8. Sound Generation By Flow Over Multiple Shallow Cavities

    … research aims at understanding the flow over multiple cavities as a first step to correlate the rich single cavity literature and the actual corrugated pipe problem with the ultimate goal of predicting oscillations amplitude in corrugate pipes. The standing wave method (SWM), which is an …

    mcmaster Repository record for Sound Generation By Flow Over Multiple Shallow Cavities (opens in a new tab)

  9. Sound Transmission Loss Through a Lightweight Double-Leaf Panel

    … are carried out on finite sized panels, where multiple separate cavities between the plates and the beams are taken into account. These panels are widely used in building, aerospace and shipbuilding industries. Although the construction and transportation of these lightweight panels are …

    auckland-tech Repository record for Sound Transmission Loss Through a Lightweight Double-Leaf Panel (opens in a new tab)

  10. ELECTROMAGNETIC AND MECHANICAL PROPERTIES OF MEDIUM BETA SRF ELLIPTICAL CAVITIES

    … frequency. Slight deformations of elliptical cavities can significantly detune the cavity frequency from the resonance. A frequency shift in the cavity lowers the nominal accelerating field, which can be compensated either by using additional RF power or both a dedicated fast mechanical tuner …

    msu Repository record for ELECTROMAGNETIC AND MECHANICAL PROPERTIES OF MEDIUM BETA SRF ELLIPTICAL CAVITIES (opens in a new tab)

  11. Cavity enhanced spectroscopies for small volume liquid analysis

    … cavity geometry: open-access plano-concave microcavities.</p> <p>The microcavities consist of an array of micron-scale concave mirrors opposed by a planar mirror, with a pathlength that is tunable to sub-nanometer precision using piezoelectric actuators. In contrast to the other experimental …

    oxford Repository record for Cavity enhanced spectroscopies for small volume liquid analysis (opens in a new tab)

  12. Metallurgical causes for the occurrence of creep damage in longitudinally seam-welded Cr-Mo high energy piping

    … is characterized by four stages; isolated cavities, aligned cavities, microcracks and macrocracks. In general, cavities initiate on grain boundaries and are normally associated with grain boundary particles (inclusions and/or carbides) or grain boundary triple points. The cavitated grain …

    utk-theses Repository record for Metallurgical causes for the occurrence of creep damage in longitudinally seam-welded Cr-Mo high energy piping (opens in a new tab)