Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"nakazima"”.

  1. Desenvolvimento do processo de construção de curvas limite de conformação

    … (CLC) através do procedimento adotado por Nakazima, 1968. Ele variando o formato dos corpos de prova submeteu os mesmos a um ensaio de estiramento simulando uma ampla faixa de deformações que vão desde o embutimento profundo passando pela deformação de tração simples até a deformação …

    brazil-ufrgs Repository record for Desenvolvimento do processo de construção de curvas limite de conformação (opens in a new tab)

  2. Characterization of Formability and Friction during Hot Stamping of Al-Si Coated Press Hardened Steel

    … was performed using a hemispherical Nakazima punch, as well as flat Marciniak and Hybrid punches, which both employed a carrier blank. The Nakazima punch resulted in faster cooling at the center of the blanks (relative to the periphery) leading to failure iv near the die entry radius …

    waterloo Repository record for Characterization of Formability and Friction during Hot Stamping of Al-Si Coated Press Hardened Steel (opens in a new tab)

  3. Constitutive and Fracture Characterization and Modelling of Monolithic and Tailor-Welded Blanks of Press-Hardening Steels

    … V-bend, and plane-strain and equibiaxial tension Nakazima domes. Both steel grades exhibited a high degree of sensitivity to cooling rate in terms of mechanical properties. For Usibor® 1500-AS, the fully-martensitic (oil-cooled) and fully-bainitic (air-cooled) microstructures had the highest …

    waterloo Repository record for Constitutive and Fracture Characterization and Modelling of Monolithic and Tailor-Welded Blanks of Press-Hardening Steels (opens in a new tab)

  4. On the Influence of the Through-Thickness Strain Gradients for Characterization of Formability and Fracture of Sheet Metal Alloys

    … the equi-biaxial stretching condition. Based on Nakazima tests that standardized in ISO12004-2 (2008), scaled-down hemispherical punches were manufactured with the intention of increasing the bend severity by reducing the bend radius. The influence of through-thickness strain gradient on …

    waterloo Repository record for On the Influence of the Through-Thickness Strain Gradients for Characterization of Formability and Fracture of Sheet Metal Alloys (opens in a new tab)

  5. Análise experimental e validação numérica do processo de estampagem de peças não-axissimétricas em aço inoxidável AISI 304

    … dos ensaios de tração, de anisotropia e de Nakazima modificado foram inseridos no software de simulação numérica. As operações de estampagem foram realizadas sob 6 condições diferentes, envolvendo três tipos de lubrificantes e duas pressões diferentes aplicadas pelo prensa-chapa. Os …

    brazil-ufrgs Repository record for Análise experimental e validação numérica do processo de estampagem de peças não-axissimétricas em aço inoxidável AISI 304 (opens in a new tab)

  6. Plastic Instability and Failure of Sheet Metals Subjected to Complex Stress States

    … strain path and higher limit strains in the Nakazima test, relative to the Marciniak test, are a natural consequence of the boundary conditions of the respective test method. A series of correction methods were applied to the Nakazima limit strains to linearize the strain path and to …

    waterloo Repository record for Plastic Instability and Failure of Sheet Metals Subjected to Complex Stress States (opens in a new tab)

  7. Análise experimental e numérica de aço inoxidável ferrítico AISI 430 para estampagem de um componente não-axissimétrico

    … por meio do ensaios de tração, anisotropia e de Nakazima modificado, foi feita a inserção no software de simulação numérica. No processo de estampagem das peças não-axissimétricas foram usadas 12 condições diferentes: variando-se duas forças de prensa-chapas, três condições de lubrificação e dois …

    brazil-ufrgs Repository record for Análise experimental e numérica de aço inoxidável ferrítico AISI 430 para estampagem de um componente não-axissimétrico (opens in a new tab)

  8. Non-random assortment of chromosome pairs and meiotic drive in Drosophila melanogaster

    … generally true. Recently, however, Hiraizumi and Nakazima (1967) reported that when the second chromosome of £. melanogaster carried segregation distorter but was free of any visible structural abnormality, it tended to assort more frequently with the Y chromosome. They also observed that the …

    hawaii Repository record for Non-random assortment of chromosome pairs and meiotic drive in Drosophila melanogaster (opens in a new tab)

  9. Elevated Temperature Formability of Precipitation Hardenable Sheet Aluminum Alloys

    … strains obtained using the ECM in Marciniak, Nakazima, and stretch-bend formability tests were consistent with two other formability characterization methods developed for room temperature, the ISO12004-2:2008 standard and the rate-dependent method developed by Volk and Hora (2011) termed the …

    waterloo Repository record for Elevated Temperature Formability of Precipitation Hardenable Sheet Aluminum Alloys (opens in a new tab)

  10. Characterization and Modeling of Sheared Edge Failure in Advanced High Strength Steel

    … four specimen geometries: the equi-biaxial Nakazima test, a plane strain v-bend test, a central hole tension test for uniaxial loading and a simple shear test. 3D micro-tomography and quantitative stereology measurement of void nucleation paired with in situ digital image correlation (DIC) …

    waterloo Repository record for Characterization and Modeling of Sheared Edge Failure in Advanced High Strength Steel (opens in a new tab)

  11. Conformabilidad de chapa de acero de alta resistencia a tracción-flexión

    … normalizado mediante ensayos de estirado tipo Nakazima. De forma similar, se ha llevado a cabo una batería de ensayos de estirado con flexión, en caminos cercanos a deformación plana, empleando punzones cilíndricos con diferentes diámetros (D20, D10, D5, D3 y D1mm) a fin de generar gradientes …

    sevilla Repository record for Conformabilidad de chapa de acero de alta resistencia a tracción-flexión (opens in a new tab)

  12. Constitutive Behaviour and Formability of Pre-aged AA7075 Sheet in a Warm Forming Process

    … warm formability tests were performed using a Nakazima [1] tooling geometry with a plane strain specimen for the same temperatures, considering a range of tooling stroke rates from 0.5-63 mm/s. The formability results were assessed utilizing limit strains based on the ISO 12004-2:2008 [2] …

    waterloo Repository record for Constitutive Behaviour and Formability of Pre-aged AA7075 Sheet in a Warm Forming Process (opens in a new tab)

  13. Análisis del efecto del gradiente de deformaciones en el conformado de Chapa Metálica

    … cual está orientado exclusivamente al ensayo de Nakazima y/o Marciniak donde los gradientes de deformaciones/tensiones son nulos o muy suaves. 2. La generación de resultados experimentales bajo condiciones controladas de tracción-flexión que permitan caracterizar el proceso de fallo y sirvan como …

    sevilla Repository record for Análisis del efecto del gradiente de deformaciones en el conformado de Chapa Metálica (opens in a new tab)