Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 683 for “"nanofiber"”.

  1. Electrospinning polyampholyte nanofiber membranes

    … the copolymers following the formation of nanofibers using ultraviolet light initiated polymerization. When all other electrospinning conditions are held constant, it was shown that as the concentration of the TMA:CAA copolymer is increased, there is a related increase in the fiber …

    missouri Repository record for Electrospinning polyampholyte nanofiber membranes (opens in a new tab)

  2. Fabrication of aligned nanofiber yarns, mats and isolation of single nanofiber in electrospinning

    … of acetone and water. In both the techniques the nanofibers suspend over the gap in a highly oriented manner, and they can be easily transferred onto a substrate for further applications. Since the fibers generated by electrospinning are in micrometer and nanometer scale, it is very complex to …

    njit Repository record for Fabrication of aligned nanofiber yarns, mats and isolation of single nanofiber in electrospinning (opens in a new tab)

  3. Development of nanofiber protective substrates

    … area fibers in the nanometer range. Polymeric nanofibers were prepared by the electrospinning process and were characterized using Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). A study on the relationship between process parameters and fiber characteristics was …

    ttu Repository record for Development of nanofiber protective substrates (opens in a new tab)

  4. Nanofiber covered stent for vascular diseases

    … was to develop a new type of covered stent, nanofiber covered stent (NCS), which is thinner in wall thickness, more flexible and more biocompatible than the commercial design. Electrospinning techniques were proposed to deposit a nanofibrous membrane onto bare metal stents. The advantages of …

    nus Repository record for Nanofiber covered stent for vascular diseases (opens in a new tab) Download file for Nanofiber covered stent for vascular diseases (opens in a new tab)

  5. The mechanical testing of single nanofiber

    Polymer nanofibers exhibit properties that make them a favorable material for the development of tissue engineering scaffolds, filtration devices, sensors, and high strength lightweight materials. Perfectly aligned PLLA Nanofibers were fabricated by an electrospinning technique under optimum …

    njit Repository record for The mechanical testing of single nanofiber (opens in a new tab)

  6. Nanofiber Scaffolds as 3D Culture Platforms

    Cell culture has become the basis for understanding the fundamental mechanisms of cell, tissue and organ function. Although major advancements in uncovering the underlying processes and mechanisms of normal and diseased cell biology have been made by using two-dimensional (2D) cell culture, there …

    mtu Repository record for Nanofiber Scaffolds as 3D Culture Platforms (opens in a new tab)

  7. Nanofiber control of ultracold quantum gases

    … can be efficiently integrated into nano-devices. Nanofibers are one of the most promising candidates for such purposes. However, in order to fully exploit their potential, a more intimate knowledge of how nanofibers interact with single neutral atoms must be gained. As we learn more about the …

    cork Repository record for Nanofiber control of ultracold quantum gases (opens in a new tab)

  8. Electrospun Nanofiber Yarns for Nanofluidic Applications

    … development and characterization of electrospun nanofiber probes. These probes are envisioned to act like sponges, drawing up fluids from microcapillaries, small organisms, and, ideally, from a single cell. Thus, the probe performance significantly depends on the materials ability to readily …

    clemson Repository record for Electrospun Nanofiber Yarns for Nanofluidic Applications (opens in a new tab)

  9. Mechanics of nanofiber networks and yarns

    Continuous nanofibers (NFs) are among the most promising types of advanced nanomaterials due to their unique mechanical and functional properties, extreme surface to mass ratio, and ultrahigh strength/toughness coupled with extreme flexibility. Continuous nanofiber networks (NFNs) and yarns are …

    nebraska Repository record for Mechanics of nanofiber networks and yarns (opens in a new tab)

  10. Polymeric Nanofiber Conduits for Peripheral Nerve Regeneration

    Synthetic polymer nanofiber conduit was fabricated to act as a guiding construct for peripheral nerve gap repair. The conduit consisted of two layers of nanofiber membranes - inner layer of aligned nanofibers to guide axon outgrowth; outer layer of randomly arranged nanofibers to provide mechanical …

    nus Repository record for Polymeric Nanofiber Conduits for Peripheral Nerve Regeneration (opens in a new tab) Download file for Polymeric Nanofiber Conduits for Peripheral Nerve Regeneration (opens in a new tab)

  11. Electrospinning collagen and hyaluronic acid nanofiber meshes

    … cells. These materials can be processed into nanofiber scaffolds using a technique called electrospinning; a process that applies high voltage to a polymer solution to draw out nanofibers that are collected on a ground plate. An electrospinning solution of collagen/HA was synthesized, and the …

    missouri Repository record for Electrospinning collagen and hyaluronic acid nanofiber meshes (opens in a new tab)

  12. Tapered optical nanofiber for light-atom interfacing

    … interaction based on tapered optical nanofibers that enable to interface neutral atoms in their vicinity. A setup for magneto-optical trap (MOT) has been built. Tapered nanofibers (TNFs) of sub-wavelength diameter, with transmission of 95 percent have been fabricated and characterized. …

    calgary Repository record for Tapered optical nanofiber for light-atom interfacing (opens in a new tab)

  13. Electrospun Polycaprolactone Nanofiber Scaffolds for Tissue Engineering

    … we explored the fabrication of 3D electrospun nanofiber scaffolds and demonstrated the feasibility of using these scaffolds for supporting cell growth. The material that we used for scaffold fabrication is a polymer, polycaprolactone (PCL). We discovered that the electrospun PCL nanofibers are …

    arkansas Repository record for Electrospun Polycaprolactone Nanofiber Scaffolds for Tissue Engineering (opens in a new tab)

  14. Novel Fabrication Of Cellulose Nitrate Nanofiber Mats

    … derivatives were electrospun into nonwoven nanofiber mats via two fabrication routes, both of which produced appropriate physical and chemical properties to support biological indicators: (1) spinning of cellulose nitrate directly and (2) nitration of cellulose acetate nonwoven mats after …

    cornell Repository record for Novel Fabrication Of Cellulose Nitrate Nanofiber Mats (opens in a new tab)

  15. Electrospun Nanofiber Reinforced Composites: Fabrication and Properties

    … research related to the use of electrospun nanofibers for reinforcement of mechanical properties of polymers, like thermoplastic polyurethane (TPU), melamine-formaldehyde (MF) and polyimide (PI). Nylon-6 and PI electrospun nanofibers are excellent candidates for reinforcement purposes as …

    bayreuth Repository record for Electrospun Nanofiber Reinforced Composites: Fabrication and Properties (opens in a new tab)

  16. Charge transport measurements of vertically aligned carbon nanofiber

    <p>Vertically aligned carbon nanofibers (VACNFs) have found a variety of electronic applications. To further realize these applications, a good understanding of the charge transport properties is essential. In this work, charge transport properties have been systematically measured for three types …

    utk-theses Repository record for Charge transport measurements of vertically aligned carbon nanofiber (opens in a new tab)

  17. Nano mechanical characterisation of a single electrospun nanofiber

    Mechanical characterization of a single polymeric nanofiber is crucial in order to predict the failure condition of fibrous scaffolds for use in tissue engineering. The relationship between microstructure and mechanical property of single electrospun nanofiber is still unknown although it was …

    nus Repository record for Nano mechanical characterisation of a single electrospun nanofiber (opens in a new tab) Download file for Nano mechanical characterisation of a single electrospun nanofiber (opens in a new tab)

  18. Mechanical Damping Properties of Carbon Nanofiber Reinforced Composites

    In this research an investigation of the damping enhancement achieved, utilizing carbon nano fibers (CNF) to epoxy resin is presented along with a corresponding model to predict damping performance. The addition of CNF fillers to the matrix allows for localized slip between the filler and the …

    unr Repository record for Mechanical Damping Properties of Carbon Nanofiber Reinforced Composites (opens in a new tab)

  19. Development of Polylactic Acid/Cellulose Nanofiber Biocomposite Foams

    … to petroleum-based polymers. Cellulose nanofibers (CNFs), derived from renewable resources, are being regarded as the next generation renewable reinforcements for the production of high performance biocomposites. The combination of PLA and CNFs not only endows the resulting composites …

    toronto-retro Repository record for Development of Polylactic Acid/Cellulose Nanofiber Biocomposite Foams (opens in a new tab)

  20. Topological optimization of nanofiber placement in a continuum

    … of very high strength or very high conductivity nanofibers. This thesis presents a heuristic procedure for the estimation of the optimal location for the nanofibers based on topological optimization concepts. Previously established topological procedures for continuum-only structures and for …

    rice Repository record for Topological optimization of nanofiber placement in a continuum (opens in a new tab)

Page 1 of 35