Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 203 for “"necking"”.

  1. Necking strains and forming limits of aluminum

    Includes bibliographical references (pages 127-129).

    colo-mines Repository record for Necking strains and forming limits of aluminum (opens in a new tab)

  2. Analytical and numerical prediction of localized necking in sheet metal forming processes

    The goal of this research is to investigate, develop and validate analytical and numerical tools that can accurately predict failure in sheet metal forming operations. The strain-based forming limit curve (FLC) is one of the tools to predict the maximum permissible strains of thin metallic sheets …

    unh-thes Repository record for Analytical and numerical prediction of localized necking in sheet metal forming processes (opens in a new tab)

  3. Study of post-necking hardening identification and deformation-induced surface roughening of metals

    … the localization of deformation and subsequent necking that happens in metals during deformation, e.g., sheet metal during forming. The open fundamental question is – what happens to the material properties inside of the localized region. The localization process is very challenging to analyze, …

    unh-thes Repository record for Study of post-necking hardening identification and deformation-induced surface roughening of metals (opens in a new tab)

  4. Numerical Simulation of Mechanical Behavior of Reinforced Sheet Metals

    … investigate the effects of strain hardening on necking improvement by using finite element package ABAQUS. In addition, the response of laminated composite in necking, pure bending and hydroforming is also examined. It is concluded that architectured structure, especially corrugated …

    mcmaster Repository record for Numerical Simulation of Mechanical Behavior of Reinforced Sheet Metals (opens in a new tab)

  5. The Role of Branching Topology on Rheological Properties and its Effect on Film-Casting Performance

    … theory. Analysis of film-width reduction or necking during film-casting for the series of LLDPE-based resins determines whether uniaxial extensional rheological characteristics, in particular strain-hardening, that are a result of LCB influence the film-necking properties. At the lowest …

    vt Repository record for The Role of Branching Topology on Rheological Properties and its Effect on Film-Casting Performance (opens in a new tab)

  6. A method for developing the true stress-strain relationship for structural steels based on tension coupon tests

    … related to accurate prediction of the onset of necking and post-necking response remains a topic of ongoing research and capturing these effects remains a challenge to researchers and engineers. The research presented in this dissertation was undertaken to extend the body of knowledge in this …

    texas Repository record for A method for developing the true stress-strain relationship for structural steels based on tension coupon tests (opens in a new tab)

  7. Analysis of Deformation and Failure in Aluminum Tube under Internal Pressure

    … to the study of plastic instabilities, necking and failure have either been based on kinematic considerations, such as finite strain effects and geometric softening, or physics-based concepts. In this study, we develop a framework that combines both approaches to investigate the tube …

    mcmaster Repository record for Analysis of Deformation and Failure in Aluminum Tube under Internal Pressure (opens in a new tab)

  8. High energy x-ray diffraction microstructural analysis of oxide dispersion strengthened steel for advanced nuclear systems

    … measurement of material responses from both necking and un-necked parts of the specimens. From the X-ray measurement, the load partitioning between the ferritic matrix and the nanoparticles was found to occur during the yielding process. The nanoparticles experienced a dramatic loading …

    uiuc Repository record for High energy x-ray diffraction microstructural analysis of oxide dispersion strengthened steel for advanced nuclear systems (opens in a new tab)

  9. Ship hull plating weld misalignment effects when subjected to tension

    … (FEA) gives insight into the deformation, necking and fracture mechanisms of typical over-matched welds. The weld rotates with local necking until the plates are aligned and then shears off. FEA showed the importance of deformed geometry in promoting final fracture by slip from the toe of …

    nps Repository record for Ship hull plating weld misalignment effects when subjected to tension (opens in a new tab)

  10. A Study of Fine Structure Development of Poly(ethylene terephthalate) in High Speed Spinning by Using a Pneumatic Drawdown Device

    … the spinline.</p> <p>A sharp diameter thinning (necking) phenomena was clearly observed on the spinline for linear and high molecular weight samples at high take-up speeds. After necking, the fiber exhibited almost constant diameter and a semi-crystalline structure. Mechanisms for necking …

    utk-theses Repository record for A Study of Fine Structure Development of Poly(ethylene terephthalate) in High Speed Spinning by Using a Pneumatic Drawdown Device (opens in a new tab)

  11. Numerical simulation of effects of cladding and superimposed hydrostatic pressure on fracture in metals under tension.

    … due to the fact that cladding increases necking strain which in tum delays the<br />void nucleation and growth. Topological arrangement of cladding in axisymmetric<br />tensile round bars shows no noticeable effect on necking but significantly affects<br />fracture strain.<br />The …

    mcmaster Repository record for Numerical simulation of effects of cladding and superimposed hydrostatic pressure on fracture in metals under tension. (opens in a new tab)

  12. Tensile Fracture Mechanisms of Ferritic/martensitic Structural Materials

    … and severe distortion of grain structure in the necking region, it is a challenge to determine the true strain/stress curve, a critical input in finite element modeling (FEM) analysis. Previous scholars have developed several analytical methods to characterize true strain/stress behavior after …

    uiuc Repository record for Tensile Fracture Mechanisms of Ferritic/martensitic Structural Materials (opens in a new tab)

  13. A micromechanical platform to study nonlinear behavior of elastomeric materials

    … set, deformation-induced anisotropy, and necking instability in highly cross-linked elastomeric gels based on different concepts.First, the popular assumptions that influence computational accuracy and simplicity of the proposed framework are examined. In modeling polymeric systems, two …

    msu Repository record for A micromechanical platform to study nonlinear behavior of elastomeric materials (opens in a new tab)

  14. A New Approach to Obtain Forming Limits of Sheet Materials

    … characteristic points of diffuse and localized necking and further the limit strains. The experimental data from hemispherical punch stretching test such as limit dome height, maximum load and location of inflection point are utilized to adjust the load curves in the FE simulations. An …

    mcmaster Repository record for A New Approach to Obtain Forming Limits of Sheet Materials (opens in a new tab)

  15. The motion and breakup of freely falling drops, immediately after formation

    … investigated. Secondary drops were formed by a necking process of the liquid columna which were formed both at the rear and at the front of the primary drop. The occurrance and the sizes of the secondary drops are related to the size and the oscillations of the primary drop. Theoretical …

    strathclyde Repository record for The motion and breakup of freely falling drops, immediately after formation (opens in a new tab)

  16. Effects of specimen geometry on tensile ductility, The

    … catalogued to determine the effect of necking mode on total elongation. Results showed that the appearance of a localized neck, characterized in sheet type specimens by plane-strain localization along a defined angle relative to the tensile axis followed by fracture along the neck, …

    colo-mines Repository record for Effects of specimen geometry on tensile ductility, The (opens in a new tab)

  17. FORMABILITY OF ADVANCED HIGH STRENGTH STEEL TUBES IN TUBE BENDING AND HYDROFORMING

    … then utilized to investigate the prediction of necking in straight and pre-bent tube hydroforming using the XSFLC method. The formability, burst pressure and corner-fill expansion in hydroforming of the pre-bent tubes was considerably less than that exhibited in hydroforming of the straight …

    waterloo Repository record for FORMABILITY OF ADVANCED HIGH STRENGTH STEEL TUBES IN TUBE BENDING AND HYDROFORMING (opens in a new tab)

Page 1 of 11