Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"negative bending"”.

  1. Behaviour of ultra-high performance concrete as a joint-fill material for precast bridge deck panels subjected to negative bending

    … material for precast deck panels subjected to negative bending. Two full-scale test specimens were constructed. The transverse joints between the panels, the shear pockets, and the deck haunches were all filled with UHPC. A total of four tests were performed including two static tests to …

    manitoba Repository record for Behaviour of ultra-high performance concrete as a joint-fill material for precast bridge deck panels subjected to negative bending (opens in a new tab)

  2. Performance of Transverse Post-Tensioned Joints Subjected to Negative Bending and Shear Stresses on Full Scale, Full Depth, Precast Concrete Bridge Deck System

    … the panels and connections, subjecting them to negative bending and shear. The overall performance of the curved bolt proved satisfactory. The moment capacity of both connections surpassed all theoretical calculations. The yield and plastic moments were 17% and 16% lower, respectively, than the …

    utahstate Repository record for Performance of Transverse Post-Tensioned Joints Subjected to Negative Bending and Shear Stresses on Full Scale, Full Depth, Precast Concrete Bridge Deck System (opens in a new tab)

  3. Finite Element Modeling of Transverse Post-Tensioned Joints in Accelerated Bridge Construction (ABC) Full-Scale Precast Bridge Deck Panels

    … the capacities of both the connections, a negative bending flexure test and shear test is performed for both the connections has been done. The negative bending test is chosen because the concrete slab is subjected to tensile force and the steel profile to compression. This leads to slab …

    utahstate Repository record for Finite Element Modeling of Transverse Post-Tensioned Joints in Accelerated Bridge Construction (ABC) Full-Scale Precast Bridge Deck Panels (opens in a new tab)

  4. Development of design criteria for continuous composite I-beam bridges with skew and right alignments

    … of 288 bridges was done for both positive and negative moments. All these structures had a regular geometry, with a uniform concrete deck resting on five identical prismatic and equally spaced steel built-up plate girders. Spans ranged from 44 to 124 feet, girder spacing 6 to 10 feet, skew …

    uiuc Repository record for Development of design criteria for continuous composite I-beam bridges with skew and right alignments (opens in a new tab)

  5. Pile behaviour subject to excavation-induced soil movement in clay

    … that behind a stable wall, the induced maximum bending moment and deflection continue to increase after excavation. As the number of piles in a group increases, the induced bending moments on the piles would reduce. It is also observed that by capping a pile group, the pile group deflection is …

    nus Repository record for Pile behaviour subject to excavation-induced soil movement in clay (opens in a new tab) Download file for Pile behaviour subject to excavation-induced soil movement in clay (opens in a new tab)

  6. Increasing residual structural capacity of cracked concrete railroad crossties with polypropylene fibers

    … once the concrete has cracked. The center negative flexural cracking is considered as a serious failure mode in concrete railroad crossties, which decreases structural capacity and results in safety issues. It also leads to deterioration of prestressed concrete crossties and shortens the …

    uiuc Repository record for Increasing residual structural capacity of cracked concrete railroad crossties with polypropylene fibers (opens in a new tab)

  7. Flexural behavior of prestressed concrete monoblock crossties

    … model was also used to calculate theoretical bending moment values under ballast reactions measured in the field. Based on the results of these analyses, recommendations to improve current design and maintenance practices for prestressed concrete crossties are presented. To measure the bending …

    uiuc Repository record for Flexural behavior of prestressed concrete monoblock crossties (opens in a new tab)

  8. Early age shrinkage and bond performance of UHPC in shear keys

    … shear key with two surface preparations under a negative bending moment. The experiment's results showed that rough surface preparation showed significantly higher bond strength and lower shrinkage of the UHPC shear key. Further, they resulted in higher adhesion between two surfaces, which was …

    manitoba Repository record for Early age shrinkage and bond performance of UHPC in shear keys (opens in a new tab)

  9. Evaluation of tensile and compressive membrane action in isolated slab column specimen

    … with 1% reinforcement ratio was tested in negative bending with in-plane lateral restraint and continuous reinforcement through the column. The slab achieved a punching shear strength of 70 kips before the first failure with 5 kips of lateral compressive force acting on the sides of the …

    missouri Repository record for Evaluation of tensile and compressive membrane action in isolated slab column specimen (opens in a new tab)

  10. Analysis of Experimental Behavior of Pretensioned Concrete Bent Caps Using Motion Capture Systems

    … were negligible. Failure occurred in the negative bending region with spalling of concrete in the compression zone for the specimens with varied void details. A more abrupt failure occurred in the bent cap with a voided overhang due to additional spalling of concrete along a compression …

    tamu Repository record for Analysis of Experimental Behavior of Pretensioned Concrete Bent Caps Using Motion Capture Systems (opens in a new tab)

  11. Evaluation of moment redistribution for hybrid HPS 70W bridge girders

    … that permit up to 10% of the maximum factored negative bending moments to be redistributed to positive bending regions in members comprised of compact sections. However, the more recent procedures may be used for a wider range of sections, including those with non-compact webs, and specifically …

    wvu Repository record for Evaluation of moment redistribution for hybrid HPS 70W bridge girders (opens in a new tab)

  12. Experimental Testing and Behavior Of TxDOT "Poor-Boy" Link Slab Details for Multi-Span Bridge Decks

    … were constructed and subjected to load to induce negative bending across the link slab. Two of these specimens followed existing TxDOT "poor-boy" joint details, one using flush panels and the other using offset panels. Two other specimens focused on retrofitting existing details, while the last …

    tamu Repository record for Experimental Testing and Behavior Of TxDOT "Poor-Boy" Link Slab Details for Multi-Span Bridge Decks (opens in a new tab)

  13. Development of self-stressing system for bridge application with emphasis on precast panel deck system

    … concrete decks, the location of maximum negative bending moment is over the interior supports. This moment produces tensile stresses in the concrete deck and compressive stress in the bottom flanges of the girders. The tensile stress in the deck leads to cracking which allow intrusion of …

    nebraska Repository record for Development of self-stressing system for bridge application with emphasis on precast panel deck system (opens in a new tab)

  14. Centrifuge modelling of tunnel-pile interaction

    … loss of 3.5% in dry sand. The maximum induced bending moment and axial load on the pile are observed to be located around the depth of tunnel center. The second part of the study focused on the pile responses due to tunnel excavation with very large volume loss. As expected, the induced pile …

    nus Repository record for Centrifuge modelling of tunnel-pile interaction (opens in a new tab) Download file for Centrifuge modelling of tunnel-pile interaction (opens in a new tab)

  15. Rotation compatibility approach to moment redistribution for design and rating of steel I -girders

    … for the redistribution of the large negative bending moments at interior supports to the less heavily stressed positive bending regions is provided. One of the key assumptions made in moment redistribution procedures is that members have sufficient ductility to sustain a given moment …

    wvu Repository record for Rotation compatibility approach to moment redistribution for design and rating of steel I -girders (opens in a new tab)

  16. Pultruded GFRP sections as stay-in-place structural open formwork for concrete slabs and girders

    … were tested in four-point monotonic uniaxial bending. Four adhesive and mechanical bond mechanisms were explored to accomplish composite action. The most effective mechanism, considering structural performance and ease of fabrication, was wet adhesive bonding of fresh concrete to GFRP. …

    queens Repository record for Pultruded GFRP sections as stay-in-place structural open formwork for concrete slabs and girders (opens in a new tab)

  17. Análise numérica comparativa entre pontes integrais e convencionais de concreto armado sujeitas às ações indiretas de temperatura, retração e fluência

    … thermal gradient action resulted in significant negative bending moments in the bridge end regions, especially in the abutment region, where the moment presented its maximum absolute value. Regarding the creep and shrinkage effects, for both types of integral systems studied, it was found that …

    brazil-ufrn Repository record for Análise numérica comparativa entre pontes integrais e convencionais de concreto armado sujeitas às ações indiretas de temperatura, retração e fluência (opens in a new tab)

  18. Partial-interaction analysis of composite beams using the direct stiffness method

    … simply supported beams loaded in positive and negative bending subjected to a point load applied at mid-span and two-span continuous composite beams subjected to point loads. The behaviour of composite beams with partial shear interaction is then investigated accounting for time effects such as …

    unsw Repository record for Partial-interaction analysis of composite beams using the direct stiffness method (opens in a new tab)

  19. The Investigation of Transverse Joints and Grouts on Full Depth Concrete Bridge Deck Panels

    … was tested on a full scale two girder setup in negative bending with a simulated HS-20 vehicle. The blockouts were built as hollow concrete rings filled with grout and left to shrink under ambient conditions. Thirteen combinations of different surface conditions and grouts were designed to test …

    vt Repository record for The Investigation of Transverse Joints and Grouts on Full Depth Concrete Bridge Deck Panels (opens in a new tab)

Page 1 of 2