Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 87 for “"neutral axis"”.
-
A 3-D Pseudo-Rigid-Body Model for Rectangular Cantilever Beams with an Arbitrary Force End-Load
… is capable of capturing the behavior of the neutral axis of a beam loaded with an arbitrary force end-load. Numerical integration of a system of differential equations yields approximate displacement and orientation of the beam's neutral axis at the free end, and curvatures of the neutral …
-
Investigation of composite action in concrete/asphalt pavements
… the occurrence of debonding. The position of the neutral axis was also determined from the data provided by the strain gages. By assuming no bond between the PCC and ACC layers, the location of the neutral axis was used to estimate the degree of bonding between the two layers. The position of the …
-
Νέα αποδοτικά πεπερασμένα στοιχεία για λεπτοτοιχές διατομές
… FOR BEAM DISPLACEMENTS ARE USED ALONG THE NEUTRAL AXIS. (II) EXACT OR POLYNOMIAL SHAPE FUNCTIONS WITH DISCRETE DEGREES OF FREEDOM FOR SHELL DISPLACEMENTS ARE USED ALONG THE MIDDLE LINE OF THE CROSS-SECTION. STRIP INTERPOLATION THEORY IS USED TO DETERMINE THE SHELL DISPLACEMENTS ALONG THE …
-
Longitudinal Crack Analysis in Concrete Prestressed Girders: Justification and Implementation
… using the Modified Truss Analogy Theory and Neutral Axis Regression Plots.
-
Shear behavior of reinforced concrete deep beams strengthened with CFRP laminates
… and ninety degrees with respect to the neutral axis. The ultimate loading capacity and behavior for each beam bonded with the CFRP laminate was observed and recorded. The mode of failure was shear in all the beams tested, which typically resulted from the delaminating between the …
-
Time-dependent analysis of cable-stayed bridges
… time causing a change in the position of the neutral axis. In different parts of a concrete bridge creep and shrinkage develop at different rates which depend upon various environmental factors and the intrinsic properties of the concrete. In bridges with a variable depth to the soffit, the …
-
Experimentation and Model Development of High Temperature Shape Memory Alloy Actuation Cycling Under Tension, Compression, and Bending
… (DIC). The four point bending results contain a neutral axis shift due to the asymmetry, and during actuation cycling, the neutral axis continues to shift as a consequence of remnant, unrecovered plastic strains. C-ring tests show the martensitic phase transformation initiate in tension followed …
-
Finite Element Analysis of Single Plate Shear Connections
… position of a connection with respect to a beam neutral axis. In addition, double-column bolt connections were studied. The results show that bolt shear rupture strength of a connection is not a function of the a-distance. Plate materials and thicknesses that do not satisfy ductility criteria …
-
Size Effects in Periodic Lattice Structured Cellular Materials
… effect. In bending, material far from the neutral axis contributes more to stiffness than material close to the neutral axis. A sample with only a few unit cells can have a relatively large amount of its material close to the neutral axis, or far away, depending on topology and choice of …
-
AC Losses and Mechanical Properties of Multifilamentary High Temperature Superconductor Tapes and Wires
… The presented analytical method accounts for the neutral axis shift caused by the progressive plastic deformations. Using these results, an optimal design for ultra-small diameter symmetric tape round (STAR) wires is also proposed. In addition, an alternate approach to enhance REBCO CC bending …
-
Analytical Modeling of Polymer-Coated Microcantilever Dynamic Microsensors
… expressions for the stress-strain relations, neutral axis and the moment-curvature relationship are developed for the dynamic hybrid beam. A detailed analysis reveals that the neutral axis of the dynamic hybrid beam is time dependent. Approximations to this parameter are proposed and their …
-
Skritulinio skerspjūvio strypo tampriai plastinio grynojo lenkimo tyrimas /
… non-dimensional deviation of the stress neutral axis from symmetry axis of an element and non-dimensional monotonic bending moment are presented. Results of theoretical analysis are compared with experimental date. Derived relationships can be also fitted to analysis of circular …
-
Multilayered Structures under large Bending: Finite Solution and Bifurcation Analysis
… states such as the existence of more than one neutral axis for certain geometries. The bending solution is employed to investigate possible in-plane and out-of-plane incremental bifurcations. The analysis reveals that a multilayered structure can behave in a completely different way from the …
-
Advances in elliptical-core two-mode optical fiber sensors
… to the distance of the sensor from the neutral axis.
-
ANALYSIS AND SHAPE MODELING OF THIN PIEZOELECTRIC ACTUATORS
… and could result in unexpected behavior.The neutral axis position, calculated by using a force balance at equilibrium under the assumption of pure bending, for all actuators used in this study is determined and compared to the ceramic layer position. The results indicated that for all …
-
Biaxial bending of L-shape reinforced concrete column sections.
… deviations only occurring in cases where the neutral axis is parallel to a major dimension of the section. This deviation from the general shape of the curve increases as the allowable concrete strain is increased and as the section is subjected to more compression. The ultimate biaxial …
-
Investigation of magnetic and magnetoelastic properties of novel materials involving cobalt ferrite and terbium silicon germanium systems
… and compressive stresses acting at 45° to the neutral axis of the plate or the rod axis. In this work the responses of nickel to shear stresses were studied under various dc applied fields. A model description was developed as a generalization of the theory of magnetomechanical effect to …
-
Passive Stand-Off Layer Damping Treatment: Theory And Experiments
… distance between the viscoelastic layer and the neutral axis of the base structure. The "stand-off" layer must have high shear stiffness in order to achieve high damping characteristics. Slotted "stand-off" layers are used to achieve such high shear stiffness and low bending stiffness. In SSOL, …
-
Manufacturability and Bending Performance of Graded Steel Structures Fabricated by Selective Laser Melting
… as a function of the distance from the neutral axis were fabricated to evaluate performance when subjected to standard bending tests. Digital image correlation (DIC) was employed to capture local and global deformation. Further, the characteristics of each of the zones, as well as …
Page 1 of 5