Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 3587 for “"nitride"”.
-
Electrical properties of dislocations within the nitride based semiconductors gallium nitride and indium nitride
… and the electron mobility within gallium nitride and indium nitride is investigated. A formulation is developed for obtaining the screening space charge concentration and the corresponding electrostatic potential profile surrounding the dislocation lines. The resultant electrostatic …
-
Texture evolution in metal nitride (aluminum nitride, titanium nitride, hafnium nitride) thin films prepared by off-normal incidence reactive magnetron sputtering
… of crystallographic texture in aluminum nitride (AlN), titanium nitride (TiN) and hafnium nitride (HfN) films deposited by off-normal incidence reactive magnetron sputtering at room temperature in N2/Ar mixtures. Texture measurements were performed by x-ray pole figure analysis of the …
-
Semiconductor electronic band alignment at heterojunctions of wurtzite aluminum nitride, gallium nitride, and indium nitride
In this thesis the band alignments for wurtzite (0001) heterojunctions of AlN, GaN, and InN semiconductors are measured by x-ray photoemission spectroscopy. The bands alignments are all found to be Type I, and the valence-band discontinuities are found to be:(UNFORMATTED TABLE OR EQUATION …
-
Optoelectronic properties of aluminum gallium nitride / gallium nitride superlattices
In this thesis, three primary findings are presented concernmg optolelectronic properties of AlGaN superlattices. First, we obtain the lowest lateral p-type resistivity and highest lateral p-type mobility to date in the AlGaN material system. Second, we obtain the first experimental results of …
-
Investigations of the gallium nitride, aluminum nitride and indium nitride semiconductors: Structural, optical, electronic and interfacial properties
… of both zincblende and wurtzite Group III - Nitride wide bandgap semiconductor materials. All of the thin films studied were grown by plasma-enhanced molecular beam epitaxy on either GaAs and SiC substrates. This growth method proved to be suitable for nitride expitaxial growth although …
-
Nitride polariton lasers
… 1 is given the theoretical background of III-nitride materials and principles of polariton physics. In Chapter 2, the study focuses on producing ultra-smooth subwavelength-thin GaN membranes by photo-electrochemically etching an InGaN sacrificial layer, enabling therefore to extract the …
-
Titanium nitride and silicon nitride films grown by pulsed laser deposition
<p>Titanium nitride, silicon nitride, and their multilayered films grown on Si (100) by Pulsed Laser Deposition (PLD) have been studied. The crystal structure and orientation of films were investigated by XRD and TEM. Titanium nitride film produced at room temperature was a polycrystal with 0.426 …
-
Fabrication and characterisation of solid titanium nitride and molybdenum nitride microelectrodes
Metal nitrides have gained interest due to their high melting point, mechanical resistance, thermal and electrical conductivity. To the best of our knowledge, titanium nitride (TiN) and molybdenum nitride (MoN) electrodes have always been prepared as thin films. However, thin film electrodes tend …
-
Effect of strain on aluminum nitride/gallium nitride Distributed Bragg Reflectors
… Reflectors (DBRs) are important components to nitride based optoelectronic devices. Nitride based DBRs are critical to the operation and performance of both Vertical Cavity Surface Emitting Lasers (VCSELs) and Light Emitting Diodes (LEDs). Aluminum Nitride (AlN)/Gallium Nitride DBRs are of …
-
Thermal and photochemical vapor deposition of aluminum nitride and gallium nitride
… The current status of work on the column III-nitride system of compound semiconductors is reviewed with special attention given to the material challenges presently limiting sophisticated device development. Furthermore, the organometallic vapor phase epitaxy (OMVPE) method of growing these …
-
Characterization of gallium arsenide nitride and indium gallium arsenide nitride novel semiconductors
… thesis, important properties of gallium arsenide nitride (GaAsN) and indium gallium arsenide nitride (InGaAsN) novel semiconductors are presented. Using several experimental techniques such as x-ray diffraction, photocurrent, photoluminescence, effusion, and secondary ion mass spectrometry, …
-
Macroporous Semiconductors Tantalum Oxide, (Oxy)nitride and Nitride for Photocatalytic Hydrogen Evolution
Due to the serious climatic consequences of CO2 pollution and increasing global energy demand, a clean and sustainable energy source is required. Perhaps the ideal clean fuel is hydrogen, which would be sustainable if it could be sourced efficiently from water. Photocatalysis using …
-
Macroporous Semiconductors Tantalum Oxide, (Oxy)nitride and Nitride for Photocatalytic Hydrogen Evolution
Due to the serious climatic consequences of CO2 pollution and increasing global energy demand, a clean and sustainable energy source is required. Perhaps the ideal clean fuel is hydrogen, which would be sustainable if it could be sourced efficiently from water. Photocatalysis using …
-
Foundations of Ohmic Contact Formation on Aluminum Gallium Nitride/gallium Nitride Heterostructures
Aluminum gallium nitride (AlGaN)/gallium nitride (GaN) high electron mobility transistors (HEMTs) have tremendous potential for application in high frequencies, high temperatures and microwave and mm power amplifications. Fabrication of Ohmic contacts for such devices that meet the stringent …
-
Muonium in gallium nitride
In this thesis measurements in wurtzite Gallium Nitride are made using muonium, M|i,=|i"^e. Muonium is created by implanting a positive muon into a host sample where it behaves as a light hydrogen-like isotope. Specifically, quadrupole level-crossing resonance (QLCR), transverse field (TF) and zero …
-
Aluminum Nitride SAW Resonators
… material used in this thesis is aluminum nitride, which exhibits a higher quality factor in SAW resonators compared to lithium niobate or other piezoelectric materials. An extensive analysis of SAW structures is carried out here, along with an investigation into the relationship between …
-
Gallium Nitride Phase Shifters
… two different types of high-power gallium nitride (GaN) phase shifters designed for X-band (8–12 GHz) but offering good performance over a much wider band. The first type of phase shifter is a novel design having 22.5° phase shift, which promises wide bandwidth (in this case limited by the …
Page 1 of 180