Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 200 for “"nitrogen adsorption"”.
-
Pore size distribution of solids and catalysts using nitrogen adsorption
Includes bibliographical references.
-
Pore-scale assessment of Middle Bakken reservoir using centrifuge, mercury injection, nitrogen adsorption, NMR, and resistivity instruments
… mercury intrusion capillary pressure (MICP), nitrogen adsorption, resistivity, and nuclear magnetic resonance (NMR) experiments on twelve Middle Bakken core plugs. The reason for such variety of experiments was the need to characterize the pores flow characteristics in addition to the …
-
Pore Volume Synthesis for Selective Carbon Dioxide-Nitrogen Adsorption Using Metal-Organic Framework-Silica Composite: UTSA-280 & HS-PEG
… areas. This study focuses on enhancing CO2 adsorption in hierarchical silica (HS-PEG) by incorporating the MOF UTSA-280. While HS-PEG alone exhibited low CO2 adsorption, the addition of UTSA-280 significantly improved both CO2 uptake and selectivity. CO2 isotherm measurements revealed …
-
Surface area of coal as influenced by low temperature oxidation processes
… pretreating the PSOC-371 coal with gases such as nitrogen, nitrogen-oxygen, and ozone-oxygen and hydrogen peroxide solutions. Surface areas were obtained from nitrogen adsorption at 77 K and carbon dioxide adsorption at either 298 or 195 K for each sample before and after treatment.
-
Petrophysics, geochemistry, mineralogy, and storage capacity of the Niobrara Formation in the Aristocrat PC H11-07 core, Wattenberg field, Denver Basin, Colorado
… and development. XRD, ICP-MS, XRF, TOC, nitrogen adsorption, WIP porosity, and well log data on the Aristocrat PC H11-07 core was used in this study. Petrophysical evaluation of the well logs shows that the chalks possess higher porosity values that average between 11-13% than the marls …
-
Network modeling of the pore structure of porous media for determining the diffusion and convective flow of a solute in monoliths and columns packed with chromatographic particles under unretained and adsorbing conditions -- comparison between theory and experiments
… for adsorbate molecules under retained (adsorption) and unretained conditions where the combined effects of steric hindrance at the entrance to the pores, frictional resistance within the pores, molecular size of the adsorbate and ligand (active site), and fractional saturation of active …
-
The Microstructures Of Estuarine Particles
… and Restronguet Creek was carried out using a nitrogen adsorption technique. The surface areas and porosities of the particles were determined using BET theory and capillary models applied to the gas adsorption isotherms. The surface areas of the suspended particles collected on axial transects …
-
Computational studies of methane adsorption in nanoporous carbon
… studies using Grand Canonical Monte Carlo on the adsorption of methane into a graphitic nanoporous adsorbent with slit-shaped pores. Simulations were done at a temperature of 303 K (room temperature), for pores between 7 and 50 A, and pressures from 0 to 360 bar. We identified the presence of …
-
Hidrodessulfurização do tiofeno sobre materiais nanoestruturados do tipo SBA-15 contendo cobalto e molibdênio
… (XRD), infrared spectroscopy (FT-IR), nitrogen adsorption and scanning electron microscopy (SEM) was verified that as much the hydrothermal synthesis method as the calcination condictions based on the kinetic studies by TG were promising for the production of mesoporous materials with …
-
Estuarine Chemical Reactivity At The Particle-water Interface
… material from the Tamar Estuary using a BET nitrogen adsorption technique has been carried out. The results showed that suspended material had a higher BET surface area (approximately 20m² / g ) than the associated sediments (approximately 13m² / g) . Also the BET surface areas (8-20m² / g) …
-
CHARACTERIZING THE PRODUCTIVE LIMIT OF THE NORTHEAST PENNSYLVANIA MARCELLUS DRY GAS WINDOW: AN INVESTIGATION OF LOW RESISTIVITY ALONG THE LINE OF DEATH
… 3) Large-scale, high-resolution SEM imaging and nitrogen adsorption to evaluate OM hosted pore size distributions and measure capacity to hold gas. Regarding the low resistivity to the south of the LOD, the STEM and EDS discovered silver dispersed throughout the OM in both porous and non-porous …
-
Morphology-Property Relationships in Semicrystalline Aerogels of Poly(ether ether ketone)
… by SAXS and high surface areas as determined by nitrogen adsorption methods. Surface area values determined from SAXS data were consistently higher than that measured directly using nitrogen adsorption, suggesting that pore densification diminishes the accessible aerogel surface area.
-
Sol-gel routes to supported Friedel-Crafts alkylation catalysts
… spectroscopy and additionally for the alumina nitrogen adsorption studies were done. Supported aluminum trichloride was also investigated as an alternative to the traditional use of aluminum trichloride.
-
The adsorption of certain gases and vapors on silver iodide and silver sulfide
In gas-solid systems, physical or van der Waals adsorption is involved if the gas remains attached to the surface of the solid by a weak interaction comparable in strength to the forces responsible for deviations of gases from ideal behavior and for liquefaction. If a gas or vapor is adsorbed by a …
-
Desenvolvimento de catalisadores de cobalto e molibdênio suportados em materiais tipo MCM-41 para a hidrodessulfurização de frações de petróleo
… by TG/DTG and through analyses of DRX, FT-IR and nitrogen adsorption was verified that as much the hydrothermal synthesis method as the calcination conditions based on the kinetic studies by TG were promising for the production of mesoporous materials with high degree of hexagonal ordination. The …
-
Characterization of alumina membranes derived from alumoxanes
… electron microscopy, atomic force microscopy, nitrogen adsorption-desorption, cleanwater flux experiments, goniometer measurements, and Zeta-meter measurements to determine membrane morphology, pore size distribution and shape, permeability, hydrophobicity, and surface charge. Alumoxane-derived …
-
Physicochemical Characterization of Portuguese Clay and Nanocomposite Preparation with Polylactide
… The complexes were also characterized by nitrogen adsorption, infrared analysis and nuclear magnetic resonance for comparing the differences between BRN and MMT.
Page 1 of 10