Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 334 for “"noise source"”.

  1. 3D Noise Source Location using Matched Field Processing

    … and to locate accompanying water tremor sources.

    qucosa-diss

  2. Measuring noise level reduction using an artificial noise source

    … near airports may be subjected to significant noise levels due to aircraft flyovers. Aircraft noise is particularly annoying when compared to other traffic noises due to its intermittent nature. While noise control is typically performed at the source, sound insulation programs are in place to …

    gatech Repository record for Measuring noise level reduction using an artificial noise source (opens in a new tab)

  3. Computational Acoustic Beamforming of Noise Source on Wind Turbine Airfoil

    … in this thesis. This novel numerical sound source localization methodology combines the advantages of the Computational Fluid Dynamics (CFD) simulation and experimental acoustic beamforming, which enable this method to take directivity of sound source emission into account while maintaining …

    waterloo Repository record for Computational Acoustic Beamforming of Noise Source on Wind Turbine Airfoil (opens in a new tab)

  4. Spatial variations in the intra-urban response to a noise source

    … been recent. One finding has been that physical noise exposure indices calibrate poorly with human noise response. The vagaries of human response to noise have given impetus to research to isolate the factors that differentiate human response to noise. The present thesis continues this research. …

    portland-state Repository record for Spatial variations in the intra-urban response to a noise source (opens in a new tab)

  5. Noise source identification and dynamic modeling of a pneumatic nailing device

    Exposure to hazardous noise levels emitted by pneumatic nailing devices contributes significantly to risk of hearing damage among the construction workers throughout the world. This health problem comes from the lack of appropriate technology such as low noise devices which in turn results from the …

    ets-quebec Download PDF for Noise source identification and dynamic modeling of a pneumatic nailing device (opens in a new tab)

  6. Noise source location in the built environment, using a simple microphone array

    An inadequate level of noise attenuation provided by a building element is frequently the result of a lack of completeness in the construction. This often invisible fault acts as a noise source in a room, so in order to undertake remedial work the source position must be found. Recently, near field …

    plymouth Repository record for Noise source location in the built environment, using a simple microphone array (opens in a new tab)

  7. The Development of a Relatively High Power Noise Source for M-Band

    Two methods of noise generation at M-band (50 - 75 kMc) were tried. They were examined for power output, spectrum shape and width, and randomness. One method involved the modulation of the repeller of a reflex klystron by a low frequency (0 - 5Mc) noise source. This method proved to be successful. …

    marquette Repository record for The Development of a Relatively High Power Noise Source for M-Band (opens in a new tab)

  8. Switching mode power supply noise source impedance measurement and EMI filter characterization

    … is closely related to the impedance of the noise source. Due to the time-varying nature of the noise source impedance of an offline power supply, the measurement of it cannot be done using conventional impedance measuring methods. Two new methods, the insertion loss method and the signal …

    vt Repository record for Switching mode power supply noise source impedance measurement and EMI filter characterization (opens in a new tab)

  9. Computational Acoustic Beamforming for Noise Source Identification for Small Horizontal Axis Wind Turbines

    … beamforming (CAB) method for identification of sources of small wind turbine noise. The methodology consists of three components: computational fluid dynamic (CFD), acoustic propagation and acoustic beamforming components. Each component of the CAB method is validated on the component level. The …

    waterloo Repository record for Computational Acoustic Beamforming for Noise Source Identification for Small Horizontal Axis Wind Turbines (opens in a new tab)

  10. Nonlinear Closed-Loop System Identification in The presence of Non-stationary Noise Source

    In this dissertation, nonlinear identi fication approaches are presented that construct Wienerand Hammerstein models. These are block-oriented models consisting of a memoryless nonlinearity either preceded or followed by a linear filter, respectively. The algorithms were developed to handle several …

    calgary Repository record for Nonlinear Closed-Loop System Identification in The presence of Non-stationary Noise Source (opens in a new tab)

  11. A comparison of four techniques for noise source identification in a ball bearing manufacturing plant

    Currently, the abilities of various noise source identification techniques are not fully understood when used in a reverberant, multi-source manufacturing environment. The purpose of the project that this thesis work was performed for was to provide recommendations for reducing the noise levels in …

    iastate Repository record for A comparison of four techniques for noise source identification in a ball bearing manufacturing plant (opens in a new tab)

  12. Source location of subsonic and supersonic jets of various geometeries via acoustic beamforming

    … the need to understand and reduce aircraft noise emissions has led numerous researchers to apply various source location techniques to jet noise. Prior to 1985, several methods for determining jet-noise source locations were explored: acoustic mirrors, microphone arrays, two-microphone …

    gatech Repository record for Source location of subsonic and supersonic jets of various geometeries via acoustic beamforming (opens in a new tab)

  13. Efficient estimation and mitigation for radio-frequency interference

    … electronic device, there are plenty of potential noise sources such as System On Chip (SoC), high speed traces, flexible cables and power converters, etc. Those noise sources can possibly introduce radio frequency interference (RFI) issues. In this dissertation, a transfer function based …

    must-thes Repository record for Efficient estimation and mitigation for radio-frequency interference (opens in a new tab)

  14. Millimeter-wave noise characterization of PHEMT devices.

    The theoretical background of thermal noise representation in two-port networks is presented. From this theory, the existing measurement techniques to characterize the noise of pseudomorphic high electron mobility transistors (PHEMTs) at millimeter-wave frequencies are described. The techniques are …

    ottawa-retro Repository record for Millimeter-wave noise characterization of PHEMT devices. (opens in a new tab)

Page 1 of 17