Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 12 of 12 for “"nominal shear strength"”.

  1. Nominal Shear Strength of Cold-formed Steel Shear Walls Using Osb Sheathing

    … oriented strand board is a common material for shear wall sheathing. an OSB is made by using wood chips as raw materials that undergo high temperature pressing to create a multi-larger structure material. Due to the OSB having a high strength in shear, it is an important material used in the …

    unt Repository record for Nominal Shear Strength of Cold-formed Steel Shear Walls Using Osb Sheathing (opens in a new tab)

  2. Nominal Shear Strength and Seismic Detailing of Cold-formed Steel Shear Walls using Steel Sheet Sheathing

    … monotonic and cyclic tests on cold-formed steel shear walls sheathed with steel sheets on one side were conducted to (1) verify the published nominal shear strength for 18-mil and 27-mil steel sheets; and (2) investigate the behavior of 6-ft. wide shear walls with multiple steel sheets. In …

    unt Repository record for Nominal Shear Strength and Seismic Detailing of Cold-formed Steel Shear Walls using Steel Sheet Sheathing (opens in a new tab)

  3. Analytical Model of Cold-formed Steel Framed Shear Wall with Steel Sheet and Wood-based Sheathing

    The cold-formed steel framed shear walls with steel sheets and wood-based sheathing are both code approved lateral force resisting system in light-framed construction. In the United States, the current design approach for cold-formed steel shear walls is capacity-based and developed from full-scale …

    unt Repository record for Analytical Model of Cold-formed Steel Framed Shear Wall with Steel Sheet and Wood-based Sheathing (opens in a new tab)

  4. Shear strengthening of unreinforced masonry (URM) walls with FRP composites

    "In this dissertation, strengthening of masonry walls with near surface mounted (NSM) FRP bars was studied. A methodology for the computation of the nominal shear strength of URM walls strengthened by structural repointing provided a reasonable and conservative fit with the experimental data. An …

    must-thes Repository record for Shear strengthening of unreinforced masonry (URM) walls with FRP composites (opens in a new tab)

  5. Multi-Hazard In-Plane Response of Steel-plate Composite (SC) Walls: Out-of-plane and Accident Thermal Loadings

    … an out-of-plane force results in out-of-plane shear and moment in the wall piers. Wall piers subjected to out-of-plane shear equal to their nominal shear strength (per US codes) develop flexural yielding and failure due to interaction between the in-plane and out-of-plane moments. Shear failure …

    purdue-thes Repository record for Multi-Hazard In-Plane Response of Steel-plate Composite (SC) Walls: Out-of-plane and Accident Thermal Loadings (opens in a new tab)

  6. In-Plane Cyclic Shear Performance of Interlocking Compressed Earth Block Walls

    … compressed earth block (CEB) masonry shear walls. CEBs are low strength earth masonry units sometimes stabilized with cement or lime. The interlocking compressed earth blocks (ICEBs) used in this experiment are dry stacked interlocking hollow units, which can be reinforced and grouted …

    calpoly Repository record for In-Plane Cyclic Shear Performance of Interlocking Compressed Earth Block Walls (opens in a new tab)

  7. Experimental Investigation of Parameters Affecting Minimum Shear Reinforcement Requirements in Prestressed Concrete Girders

    This study experimentally investigates minimum shear reinforcement requirements based on existing codes of practice and a parametric study of the factors affecting them. Minimum shear reinforcement requirements in the American Association of State Highway Transportation Officials (AASHTO) Load and …

    tamu Repository record for Experimental Investigation of Parameters Affecting Minimum Shear Reinforcement Requirements in Prestressed Concrete Girders (opens in a new tab) Embargoed until 2027-05-01

  8. Micro & nano scale mechanical testing and assembly with applications to metal based microsystems

    … remains critical in the present case. Therefore, nominal shear strength of the interface between TiN thin film and Si substrate was evaluated through customized compression test of micro cylinders containing inclined film/substrate interfaces. Non-tapered micro cylinders with diameters ranging …

    lsu-thes Repository record for Micro & nano scale mechanical testing and assembly with applications to metal based microsystems (opens in a new tab)

  9. Investigation of bond in unreinforced concrete interfaces for partial depth repairs and new construction

    … presents an experimental study on the horizontal shear strength of reinforced concrete slabs and beams with unreinforced concrete-to-concrete interfaces. Current design provisions for new construction and repair applications in ACI 318-19 and ACI 562-19 codes attribute a low capacity for …

    texas Repository record for Investigation of bond in unreinforced concrete interfaces for partial depth repairs and new construction (opens in a new tab)

  10. Shear Strength of a PCBT-53 Girder Fabricated with Lightweight, Self-Consolidating Concrete

    … The first was to experimentally determine the shear strength of the bridge girder. The initial tests focused on the web-shear strength of the girder, and the second tests focused on the flexure-shear strength. The theoretical predictions for the web shear strength were all conservative when …

    vt Repository record for Shear Strength of a PCBT-53 Girder Fabricated with Lightweight, Self-Consolidating Concrete (opens in a new tab)

  11. In-plane Seismic Design of Concrete Masonry Structures

    … involved the investigation of concrete masonry shear strength and the second part reports an investigation of the lateral strength of partially grout-filled nominally reinforced perforated concrete masonry walls. Valuable information about masonry shear strength is reported following the testing …

    auckland-ms Repository record for In-plane Seismic Design of Concrete Masonry Structures (opens in a new tab)

  12. Experimental Program for Fiber Reinforced Polymer Retrofit of Reinforced Concrete Diaphragms

    … lateral force resisting system in a building. Strengthening of the diaphragms in older reinforced concrete buildings may be necessary for several reasons, including to enhance seismic performance, address inadequate strength or stiffness, provide missing or incomplete load paths, improve …

    vt Repository record for Experimental Program for Fiber Reinforced Polymer Retrofit of Reinforced Concrete Diaphragms (opens in a new tab)