Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 672 for “"non-destructive testing"”.

  1. FPGA Based Ultrasonic Non-Destructive Testing

    In this research, a prototype of an ultrasonic testing device was developed based on a field-programmable gate array for ultrasonic testing. Ultrasound is a mechanical wave that is generated by a vibrating object and propagates through a medium. Ultrasonic testing is one of the most used …

    waterloo Repository record for FPGA Based Ultrasonic Non-Destructive Testing (opens in a new tab)

  2. High-resolution ultrasonic non-destructive testing

    … pulse wideband ultrasonic transducers in Non-Destructive-Testing (NDT) has been investigated both theoretically and experimentally. It is demonstrated that the resolution of pulse-echo NDT is affected by diffraction effects which also complicate the interpretation of echo signals. These …

    city-london Download PDF for High-resolution ultrasonic non-destructive testing (opens in a new tab)

  3. Advanced non-destructive testing of blade manufacturing defects

    … a rapidly growing and developing sector [1].Non-destructive testing (NDT) is used across a wide range of engineering fields to ensure a final component is defect-free and can be guaranteed to perform as certified in each application. In the framework of blade manufacture, NDT is often in the …

    strathclyde Repository record for Advanced non-destructive testing of blade manufacturing defects (opens in a new tab)

  4. Autonomous unmanned aerial vehicle for non-destructive testing

    … are receiving increasing attention for use in Non-Destructive Testing / Evaluation (NDT / NDE), due to affordability, safety, and the ability to access areas where manned inspection is not practical. The mobility and size of UAVs offer the flexibility to quickly deploy remote inspections of …

    strathclyde Repository record for Autonomous unmanned aerial vehicle for non-destructive testing (opens in a new tab)

  5. Nonlinear Ultrasonic Imaging Techniques for Non-Destructive Testing

    Nonlinear imaging techniques have recently emerged which have the potential to detect cracks at a much earlier stage than was previously possible. This thesis describes a group of novel nonlinear phased array imaging techniques for non-destructive testing. In contrast to conventional nonlinear …

    bristol Repository record for Nonlinear Ultrasonic Imaging Techniques for Non-Destructive Testing (opens in a new tab) Download PDF for Nonlinear Ultrasonic Imaging Techniques for Non-Destructive Testing (opens in a new tab)

  6. NON-DESTRUCTIVE TESTING OF HISTORIC REINFORCED CONCRETE STRUCTURES

    … of this study is to assess the application of nondestructive testing methods to evaluate the condition of historic concrete structures. The research highlights the importance of NDT in giving precise information regarding any potential defects and maintaining the integrity of the structure. In …

    cornell Repository record for NON-DESTRUCTIVE TESTING OF HISTORIC REINFORCED CONCRETE STRUCTURES (opens in a new tab)

  7. Lossless image compression for aerospace non-destructive testing apllications

    … processmg techniques with the application to Non-destructive Testing (NDT) images of aircraft components. The research project includes investigation of current data compression techniques and design of efficient compression methods for NDT images. Literature review was done initially to …

    cent-lancashire Download PDF for Lossless image compression for aerospace non-destructive testing apllications (opens in a new tab)

  8. Multi-scale metrology for automated non-destructive testing systems

    … diffcult to inspect rapidly using conventional Non-Destructive Testing (NDT) techniques. Industrial robots provide a means of automating the inspection process due to their high dexterity and improved path planning methods.This thesis concerns using industrial robots as a method for assessing …

    strathclyde Repository record for Multi-scale metrology for automated non-destructive testing systems (opens in a new tab)

  9. Capacitive Micromachined Ultrasonic Transducers for Non-destructive Testing Applications

    Ultrasound is a popular technique for industrial non-destructive testing (NDT) applications. By sending ultrasonic waves into an object and observing the amplitude and the delay of the reflected or transmitted waves, one can characterize the material, measure the thickness of the object, and detect …

    waterloo Repository record for Capacitive Micromachined Ultrasonic Transducers for Non-destructive Testing Applications (opens in a new tab)

  10. Capacitive Micromachined Ultrasound Transducers for Non-Destructive Testing Applications

    The need for using ultrasound non-destructive testing (NDT) to characterize, test and detect flaws within metals, led us to utilize Capacitive Micromachined Ultrasound Transducers (CMUTs) in the ultrasound NDT field. This is due to CMUT's large bandwidths and high receive sensitivity, to be a …

    waterloo Repository record for Capacitive Micromachined Ultrasound Transducers for Non-Destructive Testing Applications (opens in a new tab)

  11. Virtual source aperture ultrasonic imaging for non destructive testing

    Ultrasonic testing is of huge importance when it comes to assessing the integrity of a huge variety of structures and components. Virtual Source Aperture (VSA) is an new advanced method of testing and is considered to be a hybrid between traditional phased array (PA) techniques and full matrix …

    uwtsd Repository record for Virtual source aperture ultrasonic imaging for non destructive testing (opens in a new tab) Download PDF for Virtual source aperture ultrasonic imaging for non destructive testing (opens in a new tab)

  12. Compressive sensing based non-destructive testing using ultrasonic arrays.

    … and the notion of sparse signal recovery to the non-destructive testing application, using ultrasonic arrays. In many signal processing applications including array signal processing, there is a remarkable effort to use the concept of sparsity to solve an under-determined system of equations …

    uoit Repository record for Compressive sensing based non-destructive testing using ultrasonic arrays. (opens in a new tab)

  13. Ultrasound field measurement and modelling for non-destructive testing

    Ultrasonic Testing (UT) is one of most important methods of Non-destructive Testing (NDT) and ultrasonic waves can be generated and detected by means of numeric methods. This thesis focuses on piezoelectric transducers and Electromagnetic Acoustical Transducer (EMAT). For testing with piezoelectric …

    city-london Download PDF for Ultrasound field measurement and modelling for non-destructive testing (opens in a new tab)

  14. Non-destructive testing methods in veneer-based products manufacturing

    In modern veneer-based product manufacturing non-destructive testing (NDT) measurement methods are of importance. The great variation in wood (and veneer) material properties brings challenges in production and in the quality of the end product. By using NDT measurements methods the aim is to …

    aalto Repository record for Non-destructive testing methods in veneer-based products manufacturing (opens in a new tab)

  15. An investigation of non-destructive testing techniques for concrete structures

    … Therefore, the application of quantitative non-destructive testing and conditioning monitoring techniques is becoming more important and a necessity in order to accurately and reliably evaluate the overall structural integrity of existing and future concrete structures. This research study …

    birmingham Download PDF for An investigation of non-destructive testing techniques for concrete structures (opens in a new tab)

  16. Non-destructive testing for optimizing the rehabilitation of rigid pavements

    FWD testing was completed on three urban arterial sections and six residential streets prior to and after rehabilitation to select the appropriate layout for FWD testing, establish joint performance threshold values, optimize FWD testing time and cost, and evaluate the effect of asphalt overlays on …

    manitoba Repository record for Non-destructive testing for optimizing the rehabilitation of rigid pavements (opens in a new tab)

  17. Multi-Modal Non-Destructive Testing for Recycled Plastics in Products

    The global production of single-use plastics continues to rise rapidly, making it challenging to accurately assess both the presence and proportion of recycled materials in plastics. This ability to identify and measure recycled content is essential for promoting the development of a circular …

    buffalo Repository record for Multi-Modal Non-Destructive Testing for Recycled Plastics in Products (opens in a new tab)

  18. AUTOMATION OF NON-DESTRUCTIVE TESTING TECHINIQUES USED FOR FINDING DEFECTS

    … thesis focuses on the automation and fusion of non-destructive testing methods. The research includes the fusion of non-destructive testing methods done with infrared micro-bolometer and ultrasonic transducers. A control system which utilized mechanical, electrical, electronic systems and …

    clemson Repository record for AUTOMATION OF NON-DESTRUCTIVE TESTING TECHINIQUES USED FOR FINDING DEFECTS (opens in a new tab)

  19. Acoustic metamaterials for ultrasound manipulation for non-destructive testing applications

    Non-destructive testing (NDT) is a collection of techniques for evaluating the health of a component without damaging it. Due to this characteristic, it can be widely applied for component manufacturing and the assessment of service life in industrial applications, such as weld joints inspection, …

    bristol Repository record for Acoustic metamaterials for ultrasound manipulation for non-destructive testing applications (opens in a new tab) Download PDF for Acoustic metamaterials for ultrasound manipulation for non-destructive testing applications (opens in a new tab)

  20. Radar in non-destructive testing of thin granular dielectric layers

    … method of subsurface which is applied in the non-destructive evaluation of roads and bridges as well. In Finland, the GPR is a commonly used quality control method for the air void content of newly laid asphalt pavements. The air void content has an effect on the long-term performance of the …

    aalto Repository record for Radar in non-destructive testing of thin granular dielectric layers (opens in a new tab)

Page 1 of 34