Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 28 for “"non-linear load"”.

  1. Non-linear load-deflection models for seafloor interaction with steel catenary risers

    … as well as realistic description of riser load-deflection (P-y) response. This thesis presents two load-deflection (P-y) models (non-degradating and degradating models) to simulate seafloor-riser interaction. These two models considered the seafloor-riser system in terms of an elastic steel …

    tamu Repository record for Non-linear load-deflection models for seafloor interaction with steel catenary risers (opens in a new tab)

  2. Transient stability of power systems with non-linear load models using individual machine energy functions

    … assessment a more realistic model of the loads is used. In the proposed non-linear model, the loads are represented by any desired combination of constant impedance, constant current or constant-MVA models. The effect of the non-linear loads is reflected at the internal nodes of the …

    iastate Repository record for Transient stability of power systems with non-linear load models using individual machine energy functions (opens in a new tab)

  3. Design of unreinforced masonry walls for out-of-plane loading / Craig Robert Willis.

    … capable of predicting the key stages of the non-linear load-deflection behaviour of walls subjected to vertical bending and axial loading; new mathematical expressions for horizontal and diagonal bending moment capacities that are dimensionally consistent and account for the beneficial …

    adelaide Repository record for Design of unreinforced masonry walls for out-of-plane loading / Craig Robert Willis. (opens in a new tab)

  4. Compressive Response of Tapered Curved Composite Plates

    … shell theories using Ritz method, (3) linear finite element analysis based on first-order shear deformation shell theories, and (4) non-linear finite element analysis. Due to the variety of tapered curved composite plates and the complexity of the analysis, no closed-form analytical …

    concordia Download PDF for Compressive Response of Tapered Curved Composite Plates (opens in a new tab)

  5. Investigation of Fatigue Response with Analytical and Machine Learning Models and Hygroscopic Analysis of Asymmetric Bistable CFRP Composites

    … configurations and have small snap-through load requirements. These unique features, coupled with their light strength-to-weight and stiffness-to-weight ratios, have made them preferred options for multifunctional systems. This study investigates the fatigue and hygroscopic response of …

    clemson Repository record for Investigation of Fatigue Response with Analytical and Machine Learning Models and Hygroscopic Analysis of Asymmetric Bistable CFRP Composites (opens in a new tab)

  6. Complexity of Thyristor-based Rectifier Operation and Optimal Harmonic Mitigation Strategies

    … alternate current to direct current. However, nonlinear current loads introduce harmonics into the grid. These harmonics may reduce power quality, damage equipment, and lead to difficulty complying with standards such as IEEE 519. This thesis investigates the effect that different rectifier …

    chalmers Repository record for Complexity of Thyristor-based Rectifier Operation and Optimal Harmonic Mitigation Strategies (opens in a new tab)

  7. Economic analysis of distribution transformers under harmonic distortion

    … comparison to the remaining other losses. Use of non-linear loads in power systems is increasing, and this has become a power quality problem for both electric companies and customers. Non-linear load not only increase the distribution transformer operational costs, it causes an increase in losses …

    chalmers Repository record for Economic analysis of distribution transformers under harmonic distortion (opens in a new tab)

  8. A new, non-linear analysis of layered soil-pile-superstructure seismic response

    A non-linear finite element analysis for determining the seismic response of piles in multilayered soil deposit is presented. The analysis incorporates pile material and geometric non-linearities, P-A effects, non-linear load deformation behavior of soil-pile interaction, pile separation and the …

    ubc Repository record for A new, non-linear analysis of layered soil-pile-superstructure seismic response (opens in a new tab) Download PDF for A new, non-linear analysis of layered soil-pile-superstructure seismic response (opens in a new tab)

  9. Power quality enhancement at distribution level utilizing the unified power quality conditioner (UPQC)

    … unbalance, voltage flicker, current harmonics, load reactive power, current unbalance, and neutral current. A UPQC consists of two voltage source inverters connected back to back with each other sharing a common self- supporting DC link. One inverter is controlled as a variable voltage source in …

    ets-quebec Download PDF for Power quality enhancement at distribution level utilizing the unified power quality conditioner (UPQC) (opens in a new tab)

  10. On the Assessment of Design Tools for Thick-Walled, Thermoplastic Composite Pipe

    … at an angle preferential to the direction of loading. However, it could not predict the non-linear load/displacement response of the cylinders with fibres wound at 45degree{} or more to the loading direction. Additionally, fibre failure was observed at stresses up to 42% lower than those …

    bristol Repository record for On the Assessment of Design Tools for Thick-Walled, Thermoplastic Composite Pipe (opens in a new tab) Download PDF for On the Assessment of Design Tools for Thick-Walled, Thermoplastic Composite Pipe (opens in a new tab)

  11. Electrospun Nanofibrous Materials as Stimuli-Responsive Polymerized Hydrogels

    … Highly repeatable, reversible, rubber-like non-linear load-strain behavior with low hysteresis was strongly pH-dependent. Unusual intrinsic anisotropic swelling behavior and unique cross-over of load vs. length curves were observed and explored. Such unusual behavior was not reported for …

    nebraska Repository record for Electrospun Nanofibrous Materials as Stimuli-Responsive Polymerized Hydrogels (opens in a new tab)

  12. Numerical Modeling of Seafloor Interation with Steel Catenary Riser

    … tests. The seafloor is represented in terms of non-linear load-deflection (P-y) relationships, which are also able to account for soil stiffness degradation due to vertical cyclic loading. The P-y approach has some limitations, but simulations show good agreement with experimental data. Hence, …

    tamu Repository record for Numerical Modeling of Seafloor Interation with Steel Catenary Riser (opens in a new tab)

  13. Simplified Solutions for the Non-Linear Analysis of Axially and Laterally Loaded Piles in Clay

    … of displacements for axially and laterally loaded piled foundations is a formidable problem that hasn’t been resolved despite sustained research spanning over a century. Employing “t-z”, “m-θ”, “p-y” and “q-z” curves in the load-transfer method is a straightforward approach which reduces the …

    bristol Repository record for Simplified Solutions for the Non-Linear Analysis of Axially and Laterally Loaded Piles in Clay (opens in a new tab) Download PDF for Simplified Solutions for the Non-Linear Analysis of Axially and Laterally Loaded Piles in Clay (opens in a new tab)

  14. Finite element modelling of shear connection for steel-concrete composite girders

    … simulated taking into consideration all material nonlinearities of the components. The models are able to predict the headed shear stud capacity, the load-slip characteristic of the shear connection and modes of failure. The results obtained show good agreement with specified data from Codes of …

    whiterose Download PDF for Finite element modelling of shear connection for steel-concrete composite girders (opens in a new tab)

  15. Modeling and Control Design of a Bidirectional PWM Converter for Single-phase Energy Systems

    … is of importance because of the sensitive loads. In this thesis, different multi-loop-based control schemes are investigated and compared, especially between the load current feedback control, PR control and capacitor current loop control. It shows that PR controller reduces the …

    vt Repository record for Modeling and Control Design of a Bidirectional PWM Converter for Single-phase Energy Systems (opens in a new tab)

  16. Voltage and power control of inverter-interfaced distributed generation systems using combined direct current vector control and droop control method

    … power source for remote areas and local loads. Almost all of the DG sources are inverter-interfaced to deliver the power to the loads in the desired form, which is ac. On the other side, most of the loads are very sensitive not only to changes in voltage levels and frequency of the power …

    alabama Repository record for Voltage and power control of inverter-interfaced distributed generation systems using combined direct current vector control and droop control method (opens in a new tab)

  17. Analysis of shallow and deep foundations using soil-structure interaction techniques

    … soil moduli for a range of axially and laterally loaded pile-soil configurations. The results are verified by comparison with more rigorous solutions and the measured performance of single piles.<br/><br/>The work is extended to consider the interaction of axially and laterally loaded pile groups …

    southwales Repository record for Analysis of shallow and deep foundations using soil-structure interaction techniques (opens in a new tab) Download PDF for Analysis of shallow and deep foundations using soil-structure interaction techniques (opens in a new tab)

  18. Harmonic emissions assessment for common DC and AC electric vehicle charging station architectures

    … are grid-connected, they are going to be a new non-linear load for the host utility, which will impact its Power Quality (PQ). In this thesis, Common DC and AC bus (CDCB and CACB) architectures for grid-connected FCS are examined. For both architectures, two-level Voltage Source Converter (VSC) …

    uoit Repository record for Harmonic emissions assessment for common DC and AC electric vehicle charging station architectures (opens in a new tab)

  19. Modeling confined concrete using plasticity formulation

    … confined concrete was carried out and a non-associative flow rule with a plastic dilation rate control parameter was proposed. The plastic dilation rate formulation is a function of both the confining pressure and the lateral modulus of the confining device which is estimated during the …

    unsw Repository record for Modeling confined concrete using plasticity formulation (opens in a new tab)

  20. Developing three robust control strategies for Dynamic Voltage Restorer (DVR) for supporting renewable energy resources integration

    … Electronic technology seeks to protect sensitive loads and equipment against power quality issues such as voltage sag, swell, imbalances, harmonics from the grid, and harmonics caused by non-linear loads. The presence of non-linear loads such as rectifiers, variable-speed drives, electronic …

    ttu Repository record for Developing three robust control strategies for Dynamic Voltage Restorer (DVR) for supporting renewable energy resources integration (opens in a new tab)

Page 1 of 2