Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 60 for “"nonlinear finite element model"”.
-
Three-dimensional nonlinear finite element model for single and multiple dowel-type wood connections
A new three-dimensional finite solid element (3D FE) model for dowel-type wood connections was developed using the concept of a beam on a nonlinear wood foundation, which addresses the intricate wood crushing behaviour under the connector in a dowel type connection. In order to implement the …
-
A Nonlinear Finite Element Model for Steel-concrete Composite Beam using a Higher-order Beam Theory
… due to the deformation of shear studs having a finite stiffness in reality which is commonly known as partial shear interaction. This is an important feature which should be considered in the analysis of these composite beams to get satisfactory results. It is observed that most of the existing …
-
A Nonlinear Finite Element Model of the Human Eye to Investigate Ocular Injuries From Night Vision Goggles
… vision goggles when the airbag is deployed. A nonlinear finite element model of the human eye was constructed. Ocular structures never before included in finite element models of the eye, such as the fatty tissue, extraocular muscles, and bony orbit were included in this model. In addition, …
-
Development and Validation of a Three-Dimensional Nonlinear Finite Element Model of the C4-C6 Cervical Spine Unit
Finite element (FE) analysis is a tool that can be used to investigate the mechanics of complex structures such as the cervical spine. FE analysis of the cervical spine is useful for predicting values that might be difficult or impossible to measure experimentally. Advanced computer techniques are …
-
A nonlinear finite element model of the rat cervical spine : validation and correlation with histological measures of spinal cord injury
… have not been fully investigated. Computational modelling of SCI enables the analysis of mechanical forces and deformations within the spinal cord tissue that are not visible experimentally. I created a dynamic, hyperviscoelastic three-dimensional finite element (FE) model of the rat cervical …
-
Nonlinear material modeling and finite element analysis of V-ribbed belts
… design and manufacturing. A three-dimensional nonlinear finite element model was built to study the belt-pulley contact interaction."--Abstract, page iv.
-
Performance of Short and Slender Ultra High Performance Concrete filled Steel Tube and Double Skinned Columns
… ratio on the axial capacity of UHPCFDSTs. A nonlinear finite element model using the computer program LS-DYNA was also developed and verified. The experimental results were compared against the Canadian CSA (CAN/CSA) S16:19 code provisions which were found to overestimate the axial capacity …
-
Stress Analysis of Bacteria Submitted to Extrusion Loading
… involved in the resistance to toxins. Mechanical models of bacteria under extrusion loading were developed to determine the stress state and Young’s modulus of the cell envelope. Here I used analytical and finite element models to characterize the stresses in the cell envelope of bacteria …
-
Dynamic response and damage mechanics of automotive glazing subjected to simulated head impact
… are compared with those obtained using a 3-D nonlinear finite element model"--Abstract, page iv.
-
Application of the glass failure prediction model to flat and bent glass using finite element modeling
… are based on surface stresses determined using a nonlinear finite difference model developed during the early 1980’s. The 2016 edition of ASTM E1300 allows the use of an analytical procedure to determine the LR of glass lites. The primary analysis tools available to engineers today are based on …
-
Landing-Gear Impact Response: A Non-linear Finite Element Approach
… incur onto an aircraft’s landing gear system via Finite Element Analysis (FEA) and appropriately determining its corresponding structural and impact responses to minimize potential design failures during hard landing (abnormal impact) and shock absorption testing. Both static and dynamic loading …
-
Investigation of Local Failure Mechanisms of Inverted-T Bent Caps and Strengthening Using CFRP Sheets
… with bearing pad size as the primary variable. A nonlinear finite element model was also developed to perform correlative studies between analytical and experimental investigation. The analysis results revealed that enlarging the size of the bearing pad can improve the serviceability and the …
-
An optimal design model for sandwich pipe considering structural and thermal insulation requirements
… pressure are correlated with those from a nonlinear finite element model. A parametric study is then conducted for a wide range of variables to analyze the collapse behavior of fullscale SP with strain-hardening cementitious composite (SHCC) core. An equation to predict the SP collapse …
-
High Temperature, Buried Permanent Magnet, Brushless DC Motor
… output are predicted from calculations of the nonlinear finite element model of the motor. The motor stator is wound, potted, cured and high potential tested at 1000 degrees F. A servo amplifier from Advanced Motion Control is used to drive the high temperature motor. High temperature …
-
ROBUST MODEL DEVELOPMENT FOR EVALUATION OF EXISTING STRUCTURES
… validation aims to determine the worthiness of a model in supporting critical decision making. This determination must occur given the imperfections in the mathematical representation resulting from the unavoidable idealizations of physics phenomena. Uncertainty in parameter values furthers the …
-
Seismic Performance of Steel Plate Shear Walls Using Nonlinear Static Analysis
… behaviors and robust initial stiffness. Nonlinear seismic analysis can accurately estimate structural responses, however, the method is very time consuming and may not be suitable for regular engineering practice. On the other hand, traditional pushover analysis method does not consider …
-
Suppression of Post-Buckling Deflection and Panel-Flutter Using Shape Memory Alloy
… and thermal loading is investigated. A nonlinear finite element model based on von Karman strain displacement relation is utilized to study the effectiveness of SMA embedded panel on the flutter boundary, critical buckling temperature and post-buckling deflection. The study is performed …
-
Experimental Nonlinear Dynamics and Snap-Through of Post-Buckled Thin Laminated Composite Plates
… buckling of the structure, which can lead to nonlinear and potentially chaotic behavior. When post-buckled composite plates experience snap-through, they are subjected to large-amplitude deformations and in-plane compressive loading. These phenomena pose a potential threat to the structural …
-
The Effects of Bolt Pretension, In-Plane Eccentricity, and Friction on the Ductility of Block Shear Connections
… of destructive experiments followed by refined finite element simulation. Clamping forces create a complex triaxial stress field compounded by the stress concentration at the bolt holes. In-plane load eccentricity with respect to the centerline of the connection causes a change in stress/strain …
-
Finite Element Nonlinear Dynamic Response Analysis of the Human Knee Joint
… To develop a detailed non-linear 3-D dynamic finite element model of the knee joint and perform preliminary analysis simulating different loading conditions to confirm reasonable function of the model.</p> <p><em>Design.</em> Using ANSYS, a finite element model of the human knee was created …
Page 1 of 3