Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 54 for “"normal contact"”.
-
Analysis of lubricated normal contact of a rigid sphere on a viscoelastic halfspace
Visco-elasto-hydrodynamic lubrication (VEHL) is a problem that is presentin various industries. Research in this domain exists primarily for elastohydrodynamic lubrication (EHL) problems and not much work is available that focusses on VEHL problems. In the present work this has been addressed. The …
-
An analysis of contact stiffness and frictional receding contacts
… interfacial displacement and load for rough contacts is determined by the contact stiffness. The tangential contact stiffness for ground Ti-6Al-4V surfaces is measured to linearly decrease with the application of tangential load, approaching zero at slip. At the beginning of the application of …
-
A micromechanical investigation on the mechanism of energy dissipation in granular materials
… the relationship between energy dissipation and contact networks is investigated. Using the discrete element method, a series of triaxial compression tests with different stress paths have been simulated. The energy dissipation was analysed using two existing contact force network partitioning …
-
Foundation performance of a tower silo.
… NRC, DBR. The other measurements which included: normal contact pressure distributions, settlement and pore-water pressures at various depths and the deflection of the raft were carried out by the University of Ottawa in cooperation with NRC, DBR. The measurements have been analyzed and where …
-
A Volumetric Contact Model for Planetary Rover Wheel/Soil Interaction
… development of a volumetric wheel-soil ground contact model that is suitable for mobile robotics applications with a focus on efficient simulations of planetary rover wheels operating on compliant and irregular terrains. To model the interaction between a rover wheel and soft soil for use in …
-
Impact and Energy Absorption Characteristics of Football Helmets
… the result of severe blows to the head during normal contact in football practices, scrimmages, and games. The football helmet has evolved over the years to protect the wearer from head and neck injuries. There are many helmet models on the market as well as discontinued models, all of which …
-
Stress-strain relations for sand based on particulate considerations
… of bounds for the developed ratio of tangent and normal contact forces and the systematic variations of the tangent and normal contact force distributions during general loading, are identified as key features of particulate, discrete and frictional systems. The contact normal and the contact …
-
Influence of crystallographic orientation in normal and sliding contacts
… grain orientation on key parameters in normal and sliding contacts. The simulations of interfering cylindrical asperities, using finite element analysis, were conducted using two different plasticity models for copper: a conventional isotropic, homogeneous J2 plasticity model and a …
-
Design and analysis of a soft spiral gripper
… presents a bio-inspired technique to increase contact area while grasping and handling long slender objects by helically twisting around them. An embodiment of such a spiral gripper utilizes unique configurations of pneumatically actuated Fiber Reinforced Elastomeric Enclosures which has a …
-
Muscarinic mechanisms in a mouse model of myopia
… myopia was induced by placing a -10D contact lens over the right eyes of 200 mice. Groups were normal, contact lens wearing with or without atropine and a saline control. RT-PCR and northern blot was carried out using specific primers for m1-m5 and products sequenced. Real-time PCR was …
-
An energy model for rock slope stability analysis
… given certain assumptions, the distribution of normal forces on the contact planes is statically determinate. The resisting and driving forces may then be calculated by limiting equilibrium methods and the factor of safety determined directly. Certain geologic environments, however, especially …
-
Molecular dynamics studies on inter-nanoparticles forces
… approach and MD simulation data. Second, the normal contact forces between silica nanospheres were examined and the results show that Hertz model still hold to describe the elastic force at low compression at the nanoscale, but the contact area is larger than that predicted by continuum models …
-
LIFE ON THE OUTSIDE: A MIXED METHODS STUDY OF INCARCERATION AND FAMILY LIFE
… in the United States has become the new normal. Contact with the criminal justice system can fundamentally reshape family relationships and resources, and policymakers and families alike are grappling with how best to manage these negative repercussions. Using mixed methods, this …
-
Transport Mechanisms of Quantum Hall Supercurrents in Graphene Josephson Junctions
… gated vacuum edges extended beyond the contacts is studied to determine whether the measured supercurrents are consistent with the theoretical prediction that both edges participate in transport. Next, a device with a third normal contact on one vacuum edge is used to study how …
-
Wheel-rail contact force measurement. A comparison between distance laser and strain gauges measuring technology
… of this PhD thesis is focus on the wheel/rail contact force measurement on a 1 : 10 scaled railway vehicle. To that end, the author has designed and manufactured a dynamometric wheelset instrumented with several sensors for the direct measurement of forces applied on the instrumented wheel. Two …
-
Toward dual-probe atomic force microscopy at low temperatures: sample-tilt control and variable-friction stick–slip nanopositioning
… Operation near 4 K or in the millikelvin regime normally occurs in a vacuum or controlled cryogenic environment, which suppresses ambient humidity effects and provides access to temperature-dependent phenom ena. It also imposes severe constraints on cooling power, vibration, thermal con traction, …
-
Integrated multibody dynamics and fatigue models for predicting the fatigue life of poly-V ribbed belts
… bodies. The penalty technique was used to model normal contact between the belt and the pulleys. An asperity-based friction model was used to approximate Coulomb friction between the belt and the pulleys. The dynamic response predicted using the model was validated by comparing it to …
-
Dynamic behavior of atomic force microscope cantilevers
… height of the tip, thickness of the beam, the contact position and the angle between the cantilever and the sample surface are derived for the rectangular cantilevers modeled as an Euler-Bernoulli beam. Using this analysis reasons for disagreement between experimental and theoretical results …
-
Finite element analysis of stress distribution within metal-on-metal joint replacements
… in large wear debris particles appearing on the contact surface between the head and the cup. The process has been described as due to a stress-corrosion-cracking mechanism. Under the same loading, stress increases when the contact area decreases, which happens in the vicinity of wear debris. As …
-
Modeling of impact dynamics of tennis ball with a flat surface
… the dynamics of a tennis ball as it comes into contact with a flat surface. The model is supposed to behave as a rigid body in the horizontal direction. The model is used to predict contact of the ball with the ground and applies from start of contact to end of contact. The springs and dampers …
Page 1 of 3