Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 165 for “"normal load"”.
-
The response of an elastic plate on a Winkler foundation to a concentrated moving normal load
Electronic Thesis or Dissertation
-
An analysis of incomplete contacts in partial slip
… in safety critical components subject to extreme loads such as in dovetail joints in jet engines. In order to accurately estimate the life of these components, accurate knowledge of the shear traction and differential strains at the contact interface is required. The loading that these components …
-
A study of rolling adhesion in braking
The effect of normal load, contact velocity, and dwell time on the coefficient of adhesion at slip in braking was investigated. A test rig that simulated locomotive wheel/rail interactions was used for the experimentation. The results indicated a drop in the coefficient of adhesion with increasing …
-
Modeling the Locked-Wheel Skid Tester to Determine the Effect of Pavement Roughness on the International Friction Index
… The calibrated model was able to predict the normal load variation during actual LWT tests to a reasonable accuracy. Furthermore, by assuming a previously developed skid number (SN) versus normal load relationship, even the friction profile of the LWT during an actual test was predicted …
-
Studies in contact mechanics with reference to fretting fatigue of gas turbine blade/disc attachments
… the simultaneous proportional application of normal load, shear load and bulk tension and the condition for complete adhesion derived. When this condition is not satisfied, partial slip ensues.</p> <p>A complete account of all possible states for two load phases with different distributions of …
-
Roughness influence on strength and deformation behavior of rock discontinuities.
… the rough joint is erratic particularly at a low normal load. A steady motion develops as the normal load increases. The kinematics of translational motion has two distinct characteristics: the translation occurs as a result of a gross and uniform motion (sliding) and/or through localized …
-
A study of the static to kinetic friction transition of polymers
… which simultaneously measures friction, normal load, and relative velocity was developed to study this transition. The polymers used in this study were nylon, ABS, polycarbonate, and fiberglass filled and unfilled polypropylene. Creep effects of polymers on the static coefficient and thus …
-
Frictional vibrations in structural polymers
… the time dependence of friction under static load, friction-normal load relationships, surface roughness, internal lubrication, friction-velocity relationships, and system stiffness. Four basic types of frictional behavior were observed - steady sliding, a single stick followed by steady …
-
Design and fabrication of a granular media testing instrument and experimental determination of granular media flow behavior under static and oscillating normal loads
… were conducted under both static and oscillating normal loads. The static load experiments were conducted for various normal loads and shear rates, and oscillating normal load experiments were conducted under various oscillation frequencies, average normal loads and load amplitudes. During …
-
Experimental Investigation of the Tractive Performance of an Instrumented Off Road Tire in a Soft Soil Terrain
… and soil parameters, specifically wheel slip, normal load, inflation pres-sure, and soil compaction, as well as into the effect of combinations of such parameters on the tire and soil behavior. The results of such test data is exceedingly relevant, providing significant infor-mation to tire …
-
A sliding wear model and its application to heat exchanger tube wear
… are reliable. The relationships between wear and normal load, wear and sliding distance, wear and frictional work were determined. Advanced surface analysis techniques were used to better understand the heat exchanger tube wear problem. It was found that the roughness and its standard deviation of …
-
In-Situ Rolling Apparatus and Strain Fields of Elastomeric Rollers Under Normal and Tangential Loads
… strain fields of a roller under progressive normal and tangential loads. The apparatus allows multiple loading configurations ranging from static normal and tangential loading of the roller to free rolling and rolling with a propulsive or a braking torque. The instrument can be used to gain …
-
Behavior of Gasketed Segmental Concrete Tunnel Lining
… as the circumferential joint shear stiffness and normal load (shoving force) increase, the lining behavior becomes closer to that of the no-joint lining.
-
Experimental rubber friction modelling and its applications in tyre finite element analysis
… this modelling, constant friction coefficient is normally used, however this can lead to inaccuracies. A 3D tyre model was developed and the friction coefficients were employed in the model. The tyre was modelled in free rolling and then in steering. It was shown that with constant friction …
-
Tribological behavior of unfilled and carbon fiber reinforced polyether ether ketone/polyether imide composites
… test. The test variables were sliding speed and normal load. The wear mechanism of pure PEEK matrix was plowing and as the weight percentage of PEI in the blend was increased the wear mechanism changed to the generation of small particles. The wear rates of the unfilled PEEK/PEI blends were found …
-
Frictional transition effects in unlubricated sliding
… parameters investigated were sliding speed and load. Qualitative assessments of wear were also made. The basic apparatus consisted of a rotating disc and an elastically supported slider. The disc and slider each had the same-initial surface finish. Six different surface finishes were examined …
-
Investigación y modelización de la adherencia, el desgaste y la fenomenología de daño asociada a la rodadura en contactos rueda-carril de aceros al carbono y bainíticos
… that can be expected in a wide range on normal load and sliding conditions, both in clean and oil or water-contaminated surfaces. At he same time a complete characterization, in the mentioned range of conditions, has been obtanined for the consequences of rolling with respect to the test …
-
Tire thermal analysis and modeling
… tire and axle geometry mechanical properties, normal load and inflation pressure. However, some differences appeared when comparing forces and moments estimated by tire models and measured test data. Part of these differences is now believed to be due to variation in tire thermal properties …
-
Empirical Analysis of Pneumatic Tire Friction on Ice
… and by imposing a desired tire slip; the normal load, camber angle, toe angle, and other testing configurations can also be pre-set, as required. Methods of and issues related to controlling the production of ice and maintaining the conditions of numerous factors for each trial run were …
Page 1 of 9