Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 27 for “"notch geometry"”.

  1. Extending fatigue life of industrial low-pressure FV566 turbine blades: efficacy of a lifetime extension strategy to extend service life

    … blades are prone to fatigue cracking on the notch surfaces and pose a potential risk of fatigue failure before expected service life due to increasing exposure to start-stop fatigue loading conditions. Turbine systems are additionally subjected to 10 % over-speed testing annually. Turbine …

    soton Repository record for Extending fatigue life of industrial low-pressure FV566 turbine blades: efficacy of a lifetime extension strategy to extend service life (opens in a new tab) Download PDF for Extending fatigue life of industrial low-pressure FV566 turbine blades: efficacy of a lifetime extension strategy to extend service life (opens in a new tab)

  2. A Model for Joining the Fatigue Crack Initiation and Propagation Analyses

    … the crack initiation length (a(,I)) of a notched member on basis of the minimum total life estimate (Life-calculation method) is proposed. The crack initiation length (a(,I)) is not a fixed value, as usually assumed, but varies with stress level (or life), notch size, notch geometry, and …

    uiuc Repository record for A Model for Joining the Fatigue Crack Initiation and Propagation Analyses (opens in a new tab)

  3. An investigation of residual stresses in simulated wing panels of 7075-T6 aluminum.

    … measurements of residual stresses at notches in simulated wing panels of 7075-T6 aluminum and to establish the relationships between the local stresses, residual stresses, and the far-field or applied stress. The stress concentration factors were found to decrease with increased …

    nps Repository record for An investigation of residual stresses in simulated wing panels of 7075-T6 aluminum. (opens in a new tab)

  4. An investigation of methods for determining notch root stress from far field strain in notched flat plates.

    Notched flat plate specimens have been tested to examine Neuber's equation and other relations with respect to their application in the determination of stresses in the plastic range at the notch root when the far field strain is known. A nonlinear finite element solution has also been obtained for …

    nps Repository record for An investigation of methods for determining notch root stress from far field strain in notched flat plates. (opens in a new tab)

  5. A Comprehensive Study on Atmospheric Corrosion Performance Evaluation of Austenitic Stainless Steel Nuclear Waste Container

    … modelling to examine how sensitisation, stress, notch geometry, and plastic strain affect pit initiation, growth, and the pit-to-crack transition.<br/><br/>The first study examined chloride-induced corrosion of cold-rolled 316L, sensitised and non-sensitised, under four-point bending at 0–1.5σy, …

    bristol Repository record for A Comprehensive Study on Atmospheric Corrosion Performance Evaluation of Austenitic Stainless Steel Nuclear Waste Container (opens in a new tab) Download PDF for A Comprehensive Study on Atmospheric Corrosion Performance Evaluation of Austenitic Stainless Steel Nuclear Waste Container (opens in a new tab)

  6. Domain Wall Motion and Magnetization Switching Driven by Magnetic/Laser Fields

    … of the Permalloy nanowires on different notch depth and geometries have been investigated systematically. The results show that the depinning field is strongly dependent on the detailed notch geometry. We have found that even the notches with same triangular feature, but different …

    whiterose Download PDF for Domain Wall Motion and Magnetization Switching Driven by Magnetic/Laser Fields (opens in a new tab)

  7. Predicting the strength of notched wood beams

    … capacity of a simply supported wood beam with a notch on the tension face between the supports. The derivation used the hypothesis that cracking initiates when the hoop stress tangent to the free surface of a round-cornered notch exceeds a critical value. This critical value is characteristic to …

    vt Repository record for Predicting the strength of notched wood beams (opens in a new tab)

  8. An Experimental and Analytical Investigation of the Iosipescu Shear Test for Composite Materials

    … element analyses indicate that optimum specimen geometry and load locations depend upon the degree of orthotropy of the composite. Test results for a quasi-isotropic graphite/epoxy laminate show that modifications in the notch geometry aimed at improving stress distributions result in unexpected …

    odu Repository record for An Experimental and Analytical Investigation of the Iosipescu Shear Test for Composite Materials (opens in a new tab)

  9. An Experimental and Analytical Investigation of the Iosipescu Shear Test for Composite Materials

    … element analyses indicate that optimum specimen geometry and load locations depend upon the degree of orthotropy of the composite. Test results for a quasi-isotropic graphite/epoxy laminate show that modifications in the notch geometry aimed at improving stress distributions result in unexpected …

    odu Repository record for An Experimental and Analytical Investigation of the Iosipescu Shear Test for Composite Materials (opens in a new tab)

  10. Domain wall dynamics and resonant modes of magnetic nanostructures

    … modes) of transverse domain walls pinned at notches in a magnetic nanowire. The different sensititivies of each mode type on the nanowire and notch geometry are investigated in detail. It is found that the translational and twisting mode respond relatively strongly to changes in the notch …

    soton Download PDF for Domain wall dynamics and resonant modes of magnetic nanostructures (opens in a new tab)

  11. A fracture mechanics study of fatigue in a cobalt-base orthopaedic alloy

    … transgranular crystallographic fracture. Notch geometry and plastic zone sizes were shown to be of significance at near threshold fatigue crack propagation. Crack closure and retardation effects were observed and preliminary work was done to investigate this phenomenon. On the basis of …

    ubc Repository record for A fracture mechanics study of fatigue in a cobalt-base orthopaedic alloy (opens in a new tab) Download PDF for A fracture mechanics study of fatigue in a cobalt-base orthopaedic alloy (opens in a new tab)

  12. Small Scale Fracture Toughness Testing

    … Tests were done to see the effect of both notch geometry and sample geometry·in one of the H.S.L.A. steels, and it is verified that the minimum value of C.O.D., at crack initiation in plane strain, is independent of the geometry and plastic zone size. Further the development of a simple …

    mcmaster Repository record for Small Scale Fracture Toughness Testing (opens in a new tab)

  13. Predicting strength of wood beams with tension end notches

    … the strength of wood beams with tension end notches (TEN) was derived using a critical fillet hoop stress (CFHS) theory. The equation is a simplified description of the results of hundreds of finite element (FE) analyses of TEN beams with varied geometries (total of 690 configurations). It …

    vt Repository record for Predicting strength of wood beams with tension end notches (opens in a new tab)

  14. Fatigue Properties of a High Strength Aluminium Alloy

    … and propagation of fatigue cracks from notches under constant amplitude loading have been studied in a high strength aluminium alloy 7010-T736. The root radii of the notches varied from 0.11 mm to5 mm with the depth varying from 5 mm to 10 mm. The various approaches to prediction of …

    aston Repository record for Fatigue Properties of a High Strength Aluminium Alloy (opens in a new tab) Download PDF for Fatigue Properties of a High Strength Aluminium Alloy (opens in a new tab)

  15. The Fatique Resistance of Surface Hardened Steels

    … and propagation of fatigue cracks from notches in 10 mm thick sections of two engineering steels O80M15 and O80A47 has been studied in three point bending fatigue. A range of notch root radii varying from 0.13 mm to 3.17 mm provided different absolute distances within which the fatigue …

    aston Repository record for The Fatique Resistance of Surface Hardened Steels (opens in a new tab) Download PDF for The Fatique Resistance of Surface Hardened Steels (opens in a new tab)

  16. Investigating the mesh dependency and upscaling of 3D grain-based models for the simulation of brittle fracture processes in low-porosity crystalline rock

    … damage development in the roof forming a notch geometry by adjusting the cohesive strength. An upscaled Voronoi model underestimated the damage development in the roof and floor, and overestimated the damage in the side-walls. This was attributed to the discretization resolution …

    queens Repository record for Investigating the mesh dependency and upscaling of 3D grain-based models for the simulation of brittle fracture processes in low-porosity crystalline rock (opens in a new tab)

  17. Analytical and Experimental Investigation of Low-Cycle Fatigue Fracture in Structural Steel

    … 60 cylindrical specimens with a circumferential notch were subjected to different combinations of axial and torsional loading. The loading protocols and notch geometry were designed to produce different stress states at the location of fracture initiation. Finite element analyses were conducted …

    vt Repository record for Analytical and Experimental Investigation of Low-Cycle Fatigue Fracture in Structural Steel (opens in a new tab)

  18. Crack nucleation on V-notched PMMA and Polycarbonate

    … the criteria for a crack nucleation on a V-notched geometry for Polymethylmethacrylate (PMMA) and Polycarbonate (PC). V-notched geometries are known to have their specific notch stress intensity factor depending on the V-notch angle and the depth of the V-notch itself. It is crucial to …

    texas Repository record for Crack nucleation on V-notched PMMA and Polycarbonate (opens in a new tab)

Page 1 of 2