Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 14 of 14 for “"notchless"”.
-
Notchless Interacts with Multiple Signaling Pathways during Mouse Peri-Implantation Development
… and l11Jus4 contain missense mutations in the Notchless homolog 1 (Drosophila) (Nle1) gene. NLE1 is thought to signal via the canonical NOTCH pathway in vertebrates. Although in invertebrates and lower vertebrates, NOTCH signaling directs cell fate prior to gastrulation, it is dispensable for …
-
The effect of tooth age on the fracture toughness of four dental bonding systems
… (Kic) of dental bonding systems using the notchless triangular prism (NTP) specimen Kic test. Methods: 80 human molars and pre-molars, 40 of them from patients not older than 45 years ("young") and 40 from patients not younger than 65 years ("old"), were wet ground on 600-grit silicon …
-
Effect of bleaching agent on interfacial fracture toughness of resin composite-dentin interfaces
… interfaces was assessed using the notchless triangular prism (NTP) specimen fracture toughness test. Human molars and premolars (<6 months old) were wet ground on 600 SiC to obtain 4x4x4x4mm triangular prisms with buccal or lingual exposed for bonding. Buccal or lingual dentin …
-
Low-temperature fracture behavior of asphalt concrete in semi-circular bend test.
… II strength scaling laws, respectively, for the notchless and deep notched specimens. The validity of the scaling laws at large sizes was evaluated through finite element simulations of mode I crack growth in the SCB test. A cohesive zone model (CZM) was successfully calibrated by experimental …
-
Effects of printing orientation, post-curing time, and aging on the physical properties of a 3D printed resin composite indicated for permanent restorations
… flexural strength and flexural modulus; the notchless triangular prism specimen test was used to determine fracture toughness; IR spectroscopy was used to determine degree of conversion. Samples for the tests were printed at two orientations, 0 degrees and 90 degrees, and were post-cured for …
-
10-mdp (10-methacryloyloxydecyl dihydrogen phosphate)-mediated adherence of resin composite luting agent to rapid-fired zirconia - a fracture mechanics approach
… toughness (IKIC) was determined with the notchless triangular (NTP) specimen KIC test. Seventy-eight NTP specimens were cut and ground from RFZ blocks (Katana, Kuraray, Japan), followed by rapid firing. The samples were then cut into halves and allocated to three groups, each with a …
-
“CAD-on” interfaces - a fracture mechanics characterization
… present in “CAD-on” crowns. Methods: The notchless triangular prism (NTP) specimen fracture toughness (KIC) test was used to determine interfacial KIC. Four groups, each consisting of 6X6X6X12mm NTP specimens (n=22), were produced from IPS Emax CAD (LS2), IPS Emax ZirCAD (Y-TZP), and IPS …
-
Fracture toughness of conventional, milled and printed denture bases
… a conventional denture base material, using the notchless triangular prism (NTP) specimen KIC test, and compare it with that of CAD/CAM and 3D-printed denture base materials after 7 d and 90 d storage in 37 °C water. Materials and methods: Lucitone 199 (C), Lucitone 199 CAD (M) and Lucitone …
-
Fracture toughness, flexural strength and flexural modulus of new resin-composite CAD/CAM blocks
… test, whereas KIC was determined through the notchless triangular prism specimen KIC test. Fractured KIC surfaces were characterized with a scanning electron microscope. Results were analyzed using Weibull statistics and two-way ANOVA, followed by Scheffé multiple means comparisons. Results: …
-
IPS e.max CAD and IPS e.max Press : fracture mechanics characterization
… methods: For KIC determinations, 20 (6x6x6x12mm) notchless triangular prism (NTP) specimens of IPS e.max CAD and IPS e.max Press were prepared. IPS e.max CAD blocks were cut, ground and then crystallized, while IPS e.max Press ingots were pressed into molds obtained from wax prisms. Each specimen …
-
Mechanical properties of dental resin composite CAD/CAM blocks
… for fracture toughness (KIC) testing using the notchless triangular prism specimen (NTP) KIC test. Half of the prepared Lava Ultimate and Enamic samples were stored in 37°C water for 30 days prior to testing, to analyze the aging effect. Weibull statistics were used to evaluate the …
-
Bonding properties of innovative CAD-CAM composite biomaterials for dental prostheses
… The interfacial toughness was measured using the Notchless Triangular Prism (NTP) test. Surface characterization was performed using optical profilometry to measure the developed interfacial area ratio (Sdr) and scanning electron microscopy. Results showed that PICNs exhibit higher bonding ability …
-
Comparison of the fracture toughness, flexural strength, and flexural modulus of nine restorative materials over five time intervals
… phase dispersed unicompositional amalgam. Twelve notchless triangular prisms (NTP) (6x6x6x12 mm) and twelve rectangular bars (2x2x25 mm) were made for each test at each time following manufacturers' instructions, and stored in distilled water at 37° C for the duration of the five time intervals …
-
Properties and Applications of Polymer-Infiltrated Ceramic Network Materials
… was to use fracture mechanics, particularly the notchless triangular prism (NTP) specimen fracture toughness test to: 1) evaluate the interfacial fracture toughness (IFT) of a resin composite luting agent (RCLA) with PICNs, represented by an experimental and a commercial PICN (Vita Enamic), …