Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 58 for “"octane number"”.

  1. High Octane Number Fuels in Advanced Combustion Modes for Sustainable Transportation

    … early injection, gasoline-like fuel with high octane number is utilised to provide sufficient ignition delay and extend the load range. Understanding the influence of high-octane fuel on ignition delay is a key parameter to achieve higher loads in LTC. However, understanding is still lacking on …

    lund Repository record for High Octane Number Fuels in Advanced Combustion Modes for Sustainable Transportation (opens in a new tab) Download PDF for High Octane Number Fuels in Advanced Combustion Modes for Sustainable Transportation (opens in a new tab)

  2. End-gas autoignition propensity and flame propagation rate measurements in laser-ignited rapid compression machine experiments

    … mixtures is typically quantified using research octane number (RON), motor octane number (MON), or methane number (MN; for gaseous fuels), which are measured using single-cylinder, variable compression ratio engines. In this study, knock propensity of SI fuels was quantified via observations of …

    colostate Repository record for End-gas autoignition propensity and flame propagation rate measurements in laser-ignited rapid compression machine experiments (opens in a new tab)

  3. Impact of Fuel Properties on Partially Premixed Combustion

    … responds to fuel properties, especially research octane number value and ignition quality. The objective of this work is to gain knowledge of fuel effects on the combustion and engine-out emissions in PPC. The topics are divided into three main parts. The first part investigates the impact of …

    lund Repository record for Impact of Fuel Properties on Partially Premixed Combustion (opens in a new tab) Download PDF for Impact of Fuel Properties on Partially Premixed Combustion (opens in a new tab)

  4. ANALYSIS OF FACTORS AFFECTING ENGINE KNOCK IN MODERN SPARK IGNITION GASOLINE ENGINES TO IMPROVE ENGINE EFFICIENCY

    … first factor is fuel chemistry – how Research Octane Number (RON) and Motor Octane Number (MON) of a fuel impact modern day turbocharged SI engines. The anti-knock behavior of an engine at a speed-load point can be determined by Octane Index (OI), which is defined as OI = RON – K*(RON-MON), …

    mtu Repository record for ANALYSIS OF FACTORS AFFECTING ENGINE KNOCK IN MODERN SPARK IGNITION GASOLINE ENGINES TO IMPROVE ENGINE EFFICIENCY (opens in a new tab)

  5. Effect of Low Reactivity Fuel on Reaction Wave Growth of Dual-Fuel Stratified Mixtures in a Rapid Compression Machine

    … One such inhomogeneity is referred to as fuel octane number stratification and consists of port injecting a low reactivity fuel, allowing it to become well mixed, and then direct injecting a high reactivity fuel to introduce local mixture stratifications. Reciprocating engine and computational …

    marquette Repository record for Effect of Low Reactivity Fuel on Reaction Wave Growth of Dual-Fuel Stratified Mixtures in a Rapid Compression Machine (opens in a new tab)

  6. Investigation of the dilution effect on laminar flame characteristics in a constant volume combustion chamber

    … effect on laminar flame characteristics of iso-octane/air, high/low research octane number gasoline/air, and methane/air mixtures through both experiments and numerical simulations.Spherically expanding flames under constant pressure are employed in an optically accessible constant volume …

    msu Repository record for Investigation of the dilution effect on laminar flame characteristics in a constant volume combustion chamber (opens in a new tab)

  7. Characterizing fuel reactivity in advanced internal combustion engines

    … however, that existing industry metrics such as Octane Number and Cetane Number are insufficient to represent fuel ignition characteristics for advanced engine combustion modes. In light of the poor performance of traditional metrics, new methods have been proposed to try and better characterize, …

    colostate Repository record for Characterizing fuel reactivity in advanced internal combustion engines (opens in a new tab)

  8. Investigation of Operational Parameter Differences between the Standard RON Test Method and Knock-Limited Modern Spark-Ignition Engine Operation

    Octane numbers (ONs) are used worldwide to rate the knock propensity of gasoline-like fuels for spark-ignition engines, making ONs the leading indicator of fuel quality for commercial distribution. The ONs were established 90 years ago and have only received minor changes compared to significant …

    mtu Repository record for Investigation of Operational Parameter Differences between the Standard RON Test Method and Knock-Limited Modern Spark-Ignition Engine Operation (opens in a new tab)

  9. Autoignition modeling of natural gas for engine modeling programs: an experimental and modeling study

    … as an alternative to diesel engines. The higher octane number of methane, which is the dominant component of natural gas, allows the engines to be turbocharged and have higher compression ratio than conventional spark ignited engines. However, seasonal and regional variation in natural gas …

    iastate Repository record for Autoignition modeling of natural gas for engine modeling programs: an experimental and modeling study (opens in a new tab)

  10. The Low Load Limit of Gasoline Partially Premixed Combustion (PPC) - Experiments in a Light Duty Diesel Engine

    … region is limited at low load with high octane number fuels and the main part of the thesis is devoted to extending the low load limit of gasoline PPC. The goal is to extend the operating region of the engine towards low load using the variable valve train system, the glow plug and more …

    lund Repository record for The Low Load Limit of Gasoline Partially Premixed Combustion (PPC) - Experiments in a Light Duty Diesel Engine (opens in a new tab) Download PDF for The Low Load Limit of Gasoline Partially Premixed Combustion (PPC) - Experiments in a Light Duty Diesel Engine (opens in a new tab)

  11. Development of zeolite based acid catalysts for the hydroisomerization of n-paraffins

    … in refinery stream fuels which have a lower octane number and a higher pour point. It would be thus desirable to convert these normal paraffins to their branched isomers (which have higher octane number). Novel classes of cation incorporated Pt-M-HY (M being cations such as Zn 2+ , Al 3+ , Cd …

    concordia Download PDF for Development of zeolite based acid catalysts for the hydroisomerization of n-paraffins (opens in a new tab)

  12. An alternative pressure-oscillation-based octane rating method, for fuels below and beyond 100 RON, to aid the development of a second-generation spark-ignition biofuel

    … alternatieve methode ontwikkeld om het Research Octane Number (RON) van brandstoffen te beoordelen, gebaseerd op het meten van de typische drukfluctuaties die gepaard gaan met klop. Ten opzichte van de traditionele methoden toonde deze methode een verbeterde capaciteit om brandstoffen te …

    ghent Repository record for An alternative pressure-oscillation-based octane rating method, for fuels below and beyond 100 RON, to aid the development of a second-generation spark-ignition biofuel (opens in a new tab)

  13. ɸ‑sensitivity : A step forward in future fuels evaluation

    … where current fuel characterization methods (octane rating and cetane number) are indifferent. Therefore, ɸ‑sensitivity is needed to be understood for the development of renewable fuels in both conventional and advanced combustion engines. In this study a special test engine which is designed …

    lund Repository record for ɸ‑sensitivity : A step forward in future fuels evaluation (opens in a new tab) Download PDF for ɸ‑sensitivity : A step forward in future fuels evaluation (opens in a new tab)

  14. The hydrogenation of pyrolysis gasoline (PyGas) over nickel and palladium catalysts

    … ethylene and propylene production. It is a high octane number mixture which contains aromatics, olefins and paraffins ranging from C5s to C12s. PyGas has high potential for use as a gasoline blending mixture and/or as a source of aromatics. Currently, PyGas is generally used as a gasoline …

    glasgow Download PDF for The hydrogenation of pyrolysis gasoline (PyGas) over nickel and palladium catalysts (opens in a new tab)

  15. Computer Aided Simulation and Process Design of a Hydrogenation Plant Using Aspen HYSYS 2006

    … Hydrogenation is also used to increase the octane number of gasoline and gas oil. Sulfur, nitrogen and oxygen compounds and other unsaturated hydrocarbons are undesired components causing environmental issues, production of by-products, poisoning the catalysts and corrosion of the equipment. …

    waterloo Repository record for Computer Aided Simulation and Process Design of a Hydrogenation Plant Using Aspen HYSYS 2006 (opens in a new tab)

  16. DYNAMIC MODELING AND CONTROL OF REACTIVE DISTILLATION FOR HYDROGENATION OF BENZENE

    … is tied to process economics due to the high octane number of toluene. It is required to satisfy both of these objectives even under the influence of disturbances, as the feed composition changes on a regular basis. The dynamic model is used for developing transfer function models of two …

    tamu Repository record for DYNAMIC MODELING AND CONTROL OF REACTIVE DISTILLATION FOR HYDROGENATION OF BENZENE (opens in a new tab)

  17. Experiments on the effects of dilution and fuel composition on ignition of gasoline and alternative fuels in a rapid compression machine

    … effect was found to be dependent on both the octane number and the fuel composition of the gasoline being studied.Finally, the effect of substituting ethanol(biofuel) in gasoline surrogates for up to 40% by volume is studied. Ethanol is an octane booster, but it blends antagonistically with …

    msu Repository record for Experiments on the effects of dilution and fuel composition on ignition of gasoline and alternative fuels in a rapid compression machine (opens in a new tab)

  18. Olefin skeletal isomerization of n–butene, n–hexene and n–octene using alumina–based catalysts

    … are very important to continuously improve the octane number in the fuel pool. Therefore, by exploiting the high olefin (butene, hexene and octene) content part of the feedstocks, the overall aim of this study was to obtain olefin skeletal isomerization for the improvement of the RON in the …

    nwu-za Repository record for Olefin skeletal isomerization of n–butene, n–hexene and n–octene using alumina–based catalysts (opens in a new tab)

  19. Effects of sulphur compounds on the combustion of leaded fuels

    Measurements of the reduction in the octane number of leaded fuels by various sulphur compounds were made using a Cooperative Fuel Research Engine. The effects of seven different sulphur compounds were studied and three fuel blends were used, Attempts were then made to correlate the gaseous …

    city-london Download PDF for Effects of sulphur compounds on the combustion of leaded fuels (opens in a new tab)

  20. Effect of Hydrogen Supplementation on Performance, Knock Behaviour, and Emissions of an SI Engine Operating at Lean Air-fuel Ratios

    … knock suppression effect of the high research octane number rating. Therefore, from the knock perspective, H2 is not an ideal supplement for gasoline SI engines. Thirdly, an alternative use of H2 supplementation has been studied, i.e. for idle condition. In this part, both performance and …

    auckland-ms Repository record for Effect of Hydrogen Supplementation on Performance, Knock Behaviour, and Emissions of an SI Engine Operating at Lean Air-fuel Ratios (opens in a new tab)

Page 1 of 3