Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 236 for “"oil flow"”.

  1. Non-Newtonian oil flow through porous media

    … and experimental investigation was made of the flow through porous media of non-Newtonian fluids with yield stresses. The analysis of the problem was made in three parts: 1) Two models were developed to describe the flow through porous media of a power-law fluid with yield stress, la) Darcy's …

    ubc Repository record for Non-Newtonian oil flow through porous media (opens in a new tab) Download PDF for Non-Newtonian oil flow through porous media (opens in a new tab)

  2. Study of Oil Flow Mechanisms in Shale Reservoirs

    Shale oil is rapidly emerging as a significant and new unconventional resource. There is potential for shale oil production to spread globally over the next couple of decades. Similar to the unconventional formations, the shale oil formations are characterized with low porosity and low …

    calgary Repository record for Study of Oil Flow Mechanisms in Shale Reservoirs (opens in a new tab)

  3. Oil flow from compressor valve to discharge tube

    Oil existence is important for compressor operation because it provides lubrication, cooling and sealing. But the discharge process of the compressor inevitably entrains some oil in the refrigerant vapor, which makes oil leave compressor and circulate in the system. For better heat transfer and …

    uiuc Repository record for Oil flow from compressor valve to discharge tube (opens in a new tab)

  4. Drugs and oil flow through the Eagle Ford Shale

    … in the Eagle Ford Shale, a region of heavy oil and gas development in South Texas. Since 2008, the Eagle Ford Shale has seen an influx of people, money, and new infrastructure. This has created a "perfect storm" for drug traffickers. The region is historically poor and sparsely populated, …

    texas Repository record for Drugs and oil flow through the Eagle Ford Shale (opens in a new tab)

  5. Selective hindrance during oil flow through nanoporous shale rocks

    … influences of gas injections.A specialized core-flow setup was designed and built to accurately and repeatably detect compositional changes during flows of binary liquid hydrocarbon mixtures and crude oils through nanoporous Niobrara core samples. Experimental results show that the transport of …

    colo-mines Repository record for Selective hindrance during oil flow through nanoporous shale rocks (opens in a new tab)

  6. Oil flow in the oilwell tube annulus of vertical bearing assemblies

    Oil leakage from the oilwell tube annulus of self-contained vertical bearing assemblies has been of practical industrial concern for many years. Earlier observations of bearing behavior indicated that this leakage was associated with the complicated physical processes that describe the flow of oil …

    ubc Repository record for Oil flow in the oilwell tube annulus of vertical bearing assemblies (opens in a new tab) Download PDF for Oil flow in the oilwell tube annulus of vertical bearing assemblies (opens in a new tab)

  7. Pore structure and oil flow through hardened cement paste, mortar and concrete

    Increased oil exploration necessitates building of conc~ete structures for its production and storage. The effects of crude oil on concrete properties are not well known and little data is available in the published works. This investigation covers HCP, mortar and concrete. First, it studies the …

    whiterose Download PDF for Pore structure and oil flow through hardened cement paste, mortar and concrete (opens in a new tab)

  8. Modeling of Enhanced Heavy Oil Recovery Processes: Foamy Oil Flow and Viscosity Fingering

    Many heavy oil reservoirs are now developed by enhanced heavy oil recovery methods, such as solvent-based recovery techniques. The solvent-based recovery techniques have advantages in energy effectiveness, cost efficiency, and environmental benefits compared with other methods. In the application …

    regina Repository record for Modeling of Enhanced Heavy Oil Recovery Processes: Foamy Oil Flow and Viscosity Fingering (opens in a new tab) Download PDF for Modeling of Enhanced Heavy Oil Recovery Processes: Foamy Oil Flow and Viscosity Fingering (opens in a new tab)

  9. Experimental Study on Foamy Oil Flow by Using Different heavy Oil-Solvent Systems

    Foamy oil flow that occurs in heavy oil reservoirs under solution gas drive in the primary production process, shows an anomalous production performance compared with that in conventional solution gas drive reservoirs [Maini, 2001]. Although several laboratory experimental studies have been carried …

    regina Repository record for Experimental Study on Foamy Oil Flow by Using Different heavy Oil-Solvent Systems (opens in a new tab) Download PDF for Experimental Study on Foamy Oil Flow by Using Different heavy Oil-Solvent Systems (opens in a new tab)

  10. Effects of Temperature and Heavy Oil Viscosity on Foamy Oil Flow in Porous Media

    With vast potential reserves of heavy oil, the research on heavy oil has been the hottest topic over the decades. Foamy oil flow occurs in primary production of heavy oil reservoirs with unexpected high oil recovery factor. Studying on foamy oil mechanisms and flow behaviors helps enhancing oil …

    regina Repository record for Effects of Temperature and Heavy Oil Viscosity on Foamy Oil Flow in Porous Media (opens in a new tab) Download PDF for Effects of Temperature and Heavy Oil Viscosity on Foamy Oil Flow in Porous Media (opens in a new tab)

  11. Characterization of Gas-Oil Flow in Cyclic Solvent Injection (CSI) for Heavy Oil Recovery

    … The CSI process is therefore governed by the gas-oil flow as the solvent chamber is dominated by the free gas-oil flow and the heavy oil zone by the dispersed gas-oil flow referred to as the foamy oil flow. The gas-oil flow in CSI eventually appears as the combined flow of free gas and foamy oil …

    regina Repository record for Characterization of Gas-Oil Flow in Cyclic Solvent Injection (CSI) for Heavy Oil Recovery (opens in a new tab) Download PDF for Characterization of Gas-Oil Flow in Cyclic Solvent Injection (CSI) for Heavy Oil Recovery (opens in a new tab)

  12. Oil flow, cavitation and film reformation in journal bearings including an interactive computer-aided design study

    … of hydrodynamic journal bearings, and the side flow rate in particular, is also presented. A numerical analysis technique based on a cavitation algorithm proposed by H.G. Elrod was developed. This technique was capable of an automatic determination of the boundaries of the cavitation region and …

    whiterose Download PDF for Oil flow, cavitation and film reformation in journal bearings including an interactive computer-aided design study (opens in a new tab)

  13. Oil flow, cavitation and film reformation in journal bearings, including an interactive computer-aided design study

    … of hydrodynamic journal bearings, and the side flow rate in particular, is also presented. A numerical analysis technique based on a cavitation algorithm proposed by H.G. Elrod was developed. This technique was capable of an automatic d etermination of the boundaries of the cavitation region and …

    whiterose Download PDF for Oil flow, cavitation and film reformation in journal bearings, including an interactive computer-aided design study (opens in a new tab)

  14. Implementation of drop-based oil flow interferometry to estimate wall shear stress in three-dimensional flows

    This thesis introduces a simplified drop based oil-film interferometry (OFI) approach using silicone oil droplets to measure wall shear stress in three-dimensional flows. Wall shear stress is a critical parameter in fluid dynamics, significantly affecting aerodynamic drag and turbulent flow …

    vt Repository record for Implementation of drop-based oil flow interferometry to estimate wall shear stress in three-dimensional flows (opens in a new tab)

  15. Measurements of the Static and Dynamic Force Performance on a Five-Pad, Spherical-Pivot Tilting-Pad Journal Bearing: Influence of Oil Flow Rate

    … configuration, TPJBs operate with a reduced oil flow rate which may cause subsynchronous rotor vibration (SSV) hash. In the past, many investigated the influence of supplied oil flow rate on the bearing steady-state characteristics; however, test data for the impact on its dynamic forced …

    tamu Repository record for Measurements of the Static and Dynamic Force Performance on a Five-Pad, Spherical-Pivot Tilting-Pad Journal Bearing: Influence of Oil Flow Rate (opens in a new tab)

  16. Chops studies - a modeling and simulation perspective

    CHOPS refers to Cold Heavy Oil Production with Sand in Western Canada, with heavy oil and sand produced together. Being different from conventional primary recovery, wormhole propagation and foamy oil flow are observed to make CHOPS achieve considerable production. Differences between the …

    calgary Repository record for Chops studies - a modeling and simulation perspective (opens in a new tab)

  17. Aerodynamics of a swept wing with leading-edge ice at low Reynolds number

    … surface pressure measurements, surface oil flow visualization and 5-hole probe wake surveys. Tests were performed at Reynolds numbers of 3x105, 6x105 and 7.8x105 and corresponding Mach numbers of 0.08, 0.15 and 0.2. Force balance results show that the ice shape had a significant effect …

    uiuc Repository record for Aerodynamics of a swept wing with leading-edge ice at low Reynolds number (opens in a new tab)

Page 1 of 12