Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 55 for “"oil system"”.

  1. The Behavior of Surfactants in Water / Oil System by Dissipative Particle Dynamics

    … and the phase behavior into the water/oil system by using dissipative particle dynamics simulation. The DPD method shows to be a reliable tool to get a better understanding about the prediction of the phase behavior of surfactants/oil/water system and to estimate the properties of …

    rice Repository record for The Behavior of Surfactants in Water / Oil System by Dissipative Particle Dynamics (opens in a new tab)

  2. PHASE AND VOLUMETRIC BEHAVIOR OF CO2 AND BAKKEN OIL SYSTEM UNDER RESERVOIR CONDITIONS

    The Bakken Petroleum System (BPS) is one of the largest unconventional petroleum and natural gas resource and the most prolific tight oil plays in the North America. It is estimated that 10 to 400 billion barrels of oil has been generated and charged into the Bakken region. It is reported that the …

    ku Repository record for PHASE AND VOLUMETRIC BEHAVIOR OF CO2 AND BAKKEN OIL SYSTEM UNDER RESERVOIR CONDITIONS (opens in a new tab)

  3. Reducing Time-To-Pressure in Oil System of Combustion Engine with Oil Cooler

    The time-to-pressure in the oil system of an internal combustion engine is important to ensure that all moving components in the engine gets the lubrication and cooling needed. If the time is too long the friction between moving parts will cause wear which in turn can lead to an engine breakdown. …

    chalmers Repository record for Reducing Time-To-Pressure in Oil System of Combustion Engine with Oil Cooler (opens in a new tab)

  4. Laboratory Investigation of Polymer-flooding, ASP-flooding, and Foam-flooding in Heavy Oil System

    … the most effective techniques for Alberta heavy oil reservoirs. However, thermal techniques cannot be applied to many reservoirs, such as deep reservoir or reservoir with thin pay because heat losses will be too severe. Water flooding is an alternative but it can only achieve a very low oil …

    calgary Repository record for Laboratory Investigation of Polymer-flooding, ASP-flooding, and Foam-flooding in Heavy Oil System (opens in a new tab)

  5. Experimental and Numerical Studies of Solvent Non-Equilibrium Dissolution and Exsolution Behavior in a Heavy Oil System

    One of the most important mechanisms of foamy oil is the solvents’ non-equilibrium dissolution and exsolution behavior. Therefore, the real-time capturing of these dynamic properties is crucial in analyzing how foamy oil evolves under non-equilibrium state. In this research, various of solvent …

    regina Repository record for Experimental and Numerical Studies of Solvent Non-Equilibrium Dissolution and Exsolution Behavior in a Heavy Oil System (opens in a new tab) Download PDF for Experimental and Numerical Studies of Solvent Non-Equilibrium Dissolution and Exsolution Behavior in a Heavy Oil System (opens in a new tab)

  6. Quantification of Mutual Mass Transfer of Gas-Light Oil Systems at High Pressures and Elevated Temperatures

    Numerous tight oil resources that are characterized by both low porosity and permeability have been found in North America during past decades. Due to the extremely low permeability, water injection has found its limitation with its relatively low injectivity. Alternatively, gas injection, such as …

    regina Repository record for Quantification of Mutual Mass Transfer of Gas-Light Oil Systems at High Pressures and Elevated Temperatures (opens in a new tab) Download PDF for Quantification of Mutual Mass Transfer of Gas-Light Oil Systems at High Pressures and Elevated Temperatures (opens in a new tab)

  7. Generation of flavor esters from coconut lipids by lipase-mediated biocatalysis

    … Palatase) was investigated in both solvent-free oil system (coconut oil and fusel oil) and aqueous system (coconut cream and fusel oil). Response surface methodology and the Taguchi method were used to determine the relationships between yield of esters and reaction parameters. To gain a better …

    nus Repository record for Generation of flavor esters from coconut lipids by lipase-mediated biocatalysis (opens in a new tab) Download file for Generation of flavor esters from coconut lipids by lipase-mediated biocatalysis (opens in a new tab)

  8. Foamy oil viscosity measurement

    The rheological studies of gas-oil dispersion are essential for understanding the foamy oil flow behaviours related to high production rates in many heavy oil reservoirs. The viscosity of gas-oil dispersion is one of the critical parameters that influence the recovery in solution gas drive process. …

    regina Repository record for Foamy oil viscosity measurement (opens in a new tab) Download PDF for Foamy oil viscosity measurement (opens in a new tab)

  9. Oil pressure effects in H.V. underground cables

    The basis of the design of the oil system of a H.V. oil filled cable circuit is considered in particular the choice of oil feed locations along the cable route. Methods are established for determining the oil pressure tank requirements and the oil pressure response on application of step or pulse …

    unsw Repository record for Oil pressure effects in H.V. underground cables (opens in a new tab)

  10. Enhanced Heat and Mass Transfer for Alkane Solvent(s)-CO2-Heavy Oil Systems at High Pressures and Elevated Temperatures

    The tremendous heavy oil reserves have recently attracted considerable attention for sustaining the increasing global oil consumption. Heavy oil reservoirs are characterized by high oil viscosity and drastic drop of reservoir pressure in a short period during production, imposing great challenges …

    regina Repository record for Enhanced Heat and Mass Transfer for Alkane Solvent(s)-CO2-Heavy Oil Systems at High Pressures and Elevated Temperatures (opens in a new tab) Download PDF for Enhanced Heat and Mass Transfer for Alkane Solvent(s)-CO2-Heavy Oil Systems at High Pressures and Elevated Temperatures (opens in a new tab)

  11. Engine lubrication system model calibration and fidelity

    … The engine is one of the most impor tant subsystems of a car making up the heart of any combustion-driven vehicle, the blood of this engine being the oil, making the lubrication system one of the most critical parts of any engine. With the help of today’s advanced technology, computer …

    chalmers Repository record for Engine lubrication system model calibration and fidelity (opens in a new tab)

  12. Pvt Simulators for Microcomputers

    … The programs provide PVT properties of a black oil, a volatile oil, and a gas condensate system, respectively, based on the Peng-Robinson equation of state. The programs can run on an IBM-PC microcomputer with at least 192K memory. Input requirements are pressure, temperature, and over-all fluid …

    texas Repository record for Pvt Simulators for Microcomputers (opens in a new tab)

  13. Development of micron and submicron scale carriers for drugs and nutrients delivery

    … aims to develop a cost-effective novel delivery system capable of delivering water-soluble and oil-soluble nutrients or drugs to address paediatric compliance. Two ranges of micron and submicron scale carriers for nutrients and drugs were developed and characterized thoroughly. First, …

    east-anglia Download PDF for Development of micron and submicron scale carriers for drugs and nutrients delivery (opens in a new tab)

  14. Investigation of paraffin wax films in the presence of additives

    … will provide inhibition for any given crude oil system. The present investigation presents a technique by which a modified Langmuir film balance may be used to study the interrelationship between the formation of crude oil/water films and paraffin deposition and also to determine the effect …

    texas Repository record for Investigation of paraffin wax films in the presence of additives (opens in a new tab)

  15. Experimental Study of Foamy oil Characteristics and Post-CHOPS CSI Processes Based on CO2-C3H8 Mixture Solvent

    As the demand of crude oil increases sharply nowadays, heavy oil, an unconventional liquid hydrocarbon representing more than 70% of the world’s total oil, needs to be further produced in the coming decades. Although some laboratory experiments have been conducted to find out the mechanism of foamy …

    regina Repository record for Experimental Study of Foamy oil Characteristics and Post-CHOPS CSI Processes Based on CO2-C3H8 Mixture Solvent (opens in a new tab) Download PDF for Experimental Study of Foamy oil Characteristics and Post-CHOPS CSI Processes Based on CO2-C3H8 Mixture Solvent (opens in a new tab)

  16. Modelling Water-Hydrocarbon Mutual Solubility in Multiphase Equilibrium Calculations

    … both the multiple phase behavior of a CO2/crude oil system and water-hydrocarbon mutual solubility simultaneously. The hydrocarbon phases are modeled with a cubic EOS, and the water phase is modelled with Henry’s law constants. Our results are compared with experimental data and calculation …

    calgary Repository record for Modelling Water-Hydrocarbon Mutual Solubility in Multiphase Equilibrium Calculations (opens in a new tab)

  17. Phase Behaviour and Mass Transfer of Solvent(s)-CO2-Heavy Oil Systems Under Reservoir Conditions

    … to be an efficient agent for recovering heavy oil resources worldwide through an immiscible displacement process. One major disadvantage of CO2 immiscible process is the limited solubility of CO2 in heavy oil, resulting in limited enhanced oil recovery. Addition of light alkane solvents to CO2 …

    regina Repository record for Phase Behaviour and Mass Transfer of Solvent(s)-CO2-Heavy Oil Systems Under Reservoir Conditions (opens in a new tab) Download PDF for Phase Behaviour and Mass Transfer of Solvent(s)-CO2-Heavy Oil Systems Under Reservoir Conditions (opens in a new tab)

  18. A Reliable and Rapid Technique for the Laboratory Determination of the Minimum Miscibility Pressure for CO2 – Light Crude Oil Systems Using the Slim Tube Method

    … the 1-D displacement of the reservoir crude oil by the injected CO2 fully accounting for the thermodynamic phenomena taking place in the CO2-oil system inside a sand packed coil. I present a technique that enables the determination of the minimum miscibility pressure of a CO2 – light crude …

    tamu Repository record for A Reliable and Rapid Technique for the Laboratory Determination of the Minimum Miscibility Pressure for CO2 – Light Crude Oil Systems Using the Slim Tube Method (opens in a new tab)

  19. Quantification of dissolution and exsolution dynamics of gaseous solvents in crude oil systems under reservoir conditions

    … it is of a great importance to improve the oil recovery factor from both conventional and unconventional reservoirs. Among different enhanced oil recovery (EOR) methods, injecting gaseous solvents, including CO2, N2, flue gas, and alkane solvents, is considered as a more effective and …

    regina Repository record for Quantification of dissolution and exsolution dynamics of gaseous solvents in crude oil systems under reservoir conditions (opens in a new tab)

Page 1 of 3