Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 33 for “"oleophobic"”.
-
Synthesis, Characterization, and Application of Oleophobic Fluorinated Copolymers
… (PMMA), at various concentrations to obtain oleophobic polymer films. The morphology and surface properties of the films were studied. The results show that the fluorinated triblock copolymers with non-fluorinated middle block readily migrate to the film boundary. They can form brush-like …
-
Synthesis and Characterization of Oleophobic Fluorinated Polyester Films
… to the synthesis and characterization of oleophobic fluorinated polyester films. Specifically, the blending of oleophilic polyethylene terephthalate (PET) with low surface energy materials such as fluorinated polyesters has been used in order to fabricate oleophobic PET films. First, …
-
Mesostructured Hydrophobic-Oleophobic Silica Films for Sustained Functionality in Tribological Environments
… and drug delivery systems.;Hydrophobic-oleophobic mesoporous fluorinated silica films were synthesized via sol-gel co-condensation and coated on glass substrates. Fluorosilane and surfactant template concentrations were varied to elucidate the effect of organic functionality and porosity …
-
Bio-inspired Oleophobic/Conductive Micro/nano Structures and Their Applications in Frozen Oil Adhesion Reduction
… of the lotus leaf, numerous superhydro-oleophobic micro/nanostructures have been developed which mimicked biological systems. These structures have broad applications in industrial processes, especially oil transportation, oil/water separation and anti-fouling applications where oil …
-
Unidirectional Fluid Control Through the Modulation of Solid/Liquid Interfaces on Textiles
… we aim to transform commonplace textiles into oleophobic linings to be utilized in midstream transportation of the heavy oils and bitumen. Drawing lessons from the design of advanced filters and meshes for oil-spill-cleanup, separation of water/oil emulsions, and midstream transportation, we …
-
Fabrication of surfaces with controlled wetting properties on porous substrates using non-fluorinated chemicals
… hydrophobic, amphiphobic and hydrophilic/oleophobic. To fabricate paper with amphiphobic properties, a non-fluorinated polymer, poly (benzoxazine), was used. Benzoxazine monomer was applied to paper surfaces by either a dip coating or drop casting method. The coated paper samples were …
-
Droplet self-alignment: High-precision robotic microassembly and self-assembly
… delicately. Finally, new patterned oleophilic / oleophobic surfaces have been developed that enable self-alignment using oil-like liquids, including low-temperature curable adhesives. Self-alignment using an industrial adhesive on the patterns was demonstrated. While this surface was used for …
-
EXPLORING THE EFFECTS OF BLENDING POLY L-(LACTIDE) AND BACTERIAL POLY(3-HYDROXYBUTYRATE-CO-3-HYDROXYDECANOATE) ON YOUNG’S MODULUS AND SURFACE WETTABILITY OF BIOPOLYMER FILMS
… than that of the neat PLLA film, and strong oleophobic behavior. We noted that increasing PHBD content led to greater WCA and oleophobic films. TGA thermograms revealed the blends’ multistep decomposition, with a decreasing onset degradation temperature as PHBD content increased. ATR-FTIR, IR …
-
Multifunctional electrospun polysulfone nanofibrous membranes incorporating functional inclusions for efficient complex oil–water separation
… ENs becoming strongly hydrophobic and underwater oleophobic (water contact angle ≈138–150°; underwater oil contact angle ≈130–160°), and MP-series ENs exhibiting superhydrophilic/underwater oleophobic behavior (underwater oil contact angle ≈140–160°; water uptake time ≈1–several s). These tailored …
-
Droplet repellency of microfabricated surfaces in saturated environments
… and waffle surfaces are able to maintain oleophobic behavior for droplets in a saturated environment with a concentration of up to 50% R-134a. The surfaces described in this thesis could be used to significantly improve devices that rely upon a liquid-vapor interface, including two-phase …
-
DEVELOPMENT OF NOVEL FUNCTIONALIZED MEMBRANES FOR ANTIFOULING PERFORMANCES IN WATER OR WASTERWATER TREATMENT
… membrane surface exhibiting both hydrophilic and oleophobic surface properties was prepared and tested with some typical microorganisms. In the prevention of membrane organic fouling, the major attention was placed on the prevention of organic matter adsorption on a membrane surface. Again, …
-
OIL- AND WATER-RESISTANT PAPER COATINGS USING LOW-COST BIODEGRADABLE POLYMER BLENDS FOR PACKAGING APPLICATIONS
… (chitosan-g-PDMS) copolymer. The hydrophobic and oleophobic performance of the coated paper with PVOH and chitosan-g-PDMS blend yielded good water-resistance (Cobb60 value: 20±2.4 g/m2) and a moderate oil resistance (7/12 kit rating). Superior water and grease resistance were achieved with starch …
-
Exploration and Functionalisation of Plasma-Exfoliated Graphene-Based Materials for Advanced Applications
… The subsequent composite material exhibits oleophobic properties and is used to synthesise free-standing films and to coat upon various substrates, including Kevlar, carbon fibre, glass fibre, nylon, and stainless-steel mesh. These materials found success in their ability to enable oil/water …
-
Development of process analytical technologies and application for complicated reaction conditions
… was achieved by developing a novel hydrophilic/oleophobic stainless steel filter. Partition coefficients of boronic acids with varying functional groups have been tested using this platform. Biphasic Suzuki-Miyaura coupling reaction was also explored. In addition to the heterogeneous conditions, …
-
Creating a Map for Surgeons: Direct Blotting Assisted Stamping of Tissue for MALDI Imaging Mass Spectrometry
… micro-extraction arrays are fabricated using oleophobic coatings with SETs, also known as micro-patches, arrayed by plasma etching allowing for droplets of analytes to be confined in spatially resolved patches. Based on these findings, surface stamping and MALDI analysis can be implemented as …
-
Fluorinated Raspberry-Like Particles for Superamphiphobic Coatings
… oil, and hexadecane. The coatings exhibited superoleophobic behavior against diiodomethane and cooking oil, as well as highly oleophobic behavior against hexadecane. This work demonstrates a simple and efficient route for the fabrication of superamphiphobic surfaces. Additionally, these surfaces …
-
Alternatives to fluorinated firefighting foams
… to fluorinated firefighting foams. The unique oleophobic and hydrophobic properties of fluorinated firefighting foams prevent them from mixing with oils, making them the current medium of choice for efficiently controlling oil fires. Unfortunately, these foams negatively impact the environment, …
-
Hydrogel with Selective Absorption for Separation of Liquid Mixtures
… work, we report a hydrophilic (water-loving) and oleophobic (oil-hating) hydrogel by copolymerizing N-Isopropylacrylamide (NIPAM) with 1H,1H,2H,2H-Heptadecafluorodecyl acrylate (F-acrylate) (F-NIPAM). Our F-NIPAM can selectively absorb polar liquids while repelling non-polar liquids. Utilizing …
-
Wetting phenomena : from basic science to applications
… applications of hydrophobic, hydrophilic and oleophobic surfaces. Examples of such applications include self cleaning materials and water purifying surfaces. Besides the applications, there are still fundamental open questions concerning the transition between the wet and dry surface states, …
-
Fouling and its control in membrane distillation for the treatment of reverse osmosis brine
… MD performance was assessed using a commercial oleophobic membrane. The experimental works were undertaken using a bench-scale direct contact membrane distillation (DCMD) apparatus which was specifically constructed for this study. The key findings from this study include: (1) for brine with the …
Page 1 of 2