Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 45 for “"operating cycle"”.
-
Towards a simulation environment for Operating Cycle Analysis of Road Transports
… in simulation softwares must be improved and operating cycles used in these simulations has to be more accurate. There are two main aims with this thesis: the first is to investigate and propose two simulation environments that could be used by stockholders interested of performing their own …
-
Energy consumption prediction for heavy electric vehicles based on the operating cycle format
The objective of this report is to study the energy consumption of a heavy electric vehicle while it is on the road driving along an unknown route. The results from this project deliver a method and a framework that can be used to estimate certain environmental factors’ energy consumption affect on …
-
A surveillance strategy for a four year operating cycle in commercial pressurized water reactors
… strategy necessary to achieve a 48 month life cycle was developed. The primary goals and objectives of the strategy were to overcome the regulatory and investment protection barriers to extended cycle lengths, provide a systematic surveillance resolution procedure, and provide a framework for …
-
Design Optimization of Permanent Magnet Machines Over a Target Operating Cycle Using Computationally Efficient Techniques
… improving the machine performance at the rated operating conditions, thus overlooking the performance treatment over the entire range of operation in the constant torque and extended speed regions. This is mainly due to the computational complexities associated with several aspects of such …
-
Assessing the feasibility of replacing a specific diesel truck with a Battery Electric Vehicle using the Operating Cycle format
… developed within the COVER project is called Operating Cycle (OC). It is a description of a road transport mission with an adequate level of detail that captures the physical and practical phenomenon of a transport mission. It can be divided into two sub-descriptions, the deterministic …
-
Maintenance cycle extension in advanced light water reactor plant design
… and Secure) is to utilize an eight year operating cycle. This thesis has developed a formalized strategy to address, during the design phase, the maintenance-related barriers to an extended operating cycle. The top-level objective of this thesis was to develop a methodology for injecting …
-
A comparative analysis on the impact of firm-specific characteristics and macroeconomic variables on financial performance and working capital management of listed companies in Nigeria
… studied comprise firm size, leverage, operating cycle, and sales growth, while the macroeconomic variables studied include inflation rate, exchange rate, and gross domestic product. Secondary sources of data were sourced from the annual reports of the companies listed under the three …
-
Neutronic Characteristics of Using Zirconium Diboride and Gadolinium in a Westinghouse 17 X 17 Fuel Assembly
… has been a trend by the utilities to extend the operating cycle of their power reactors in the production of electricity. In order to achieve this, variations in fuel composition, fuel pin arrangement, and burnable absorber distribution have been proposed. Burnable absorbers are materials that …
-
Safety Performance of High Burnup and Extended Enrichment Pressurized Water Reactor Fuels
… fuel vendors, with substantial interest from operating utilities. These designs have the potential to provide economic benefits, notably in the ability to extend the operating cycle length of pressurized water reactors from 18 to 24 months. To support this increase, these fuel forms must be …
-
Combinando o Filtro de Kalman com um modelo de dano contínuo para a identificação de dano e avaliação de vida residual
… of physical dynamic systems throughout its operating cycle. Its methodology consists of creating a digital copy to monitor the health of a structure, based on physics and data, in addition to building an approach to identifying and predicting damage based on phenomenological models [1]. …
-
Αριθμητική προσομοίωση καύσης και εκπομπής μονοξειδίου του αζώτου κινητήρων Otto αερίων βιοκαυσίμων: ενεργειακή και εξεργειακή ανάλυση
… simulation model of the closed part of the operating cycle of homogeneous charge spark ignition engines for the prediction of performance and nitric oxide emissions. In addition, exergy analysis of the cylinder charge was applied in order to quantify the destruction and loss of exergy …
-
Potential Future Engine Cycles for Improved Thermal Efficiency
… internal combustion engine (ICE) and several ICE operating cycle concepts which are intended to produce higher brake efficiencies than the baseline which runs on an Otto cycle. The baseline is a spark ignition gasoline engine representative of modern naturally aspirated automotive engines in its …
-
Ajuste no modelo CAPM para precificação de empresas considerando variáveis contábeis
… (related to the S&P500 index), Free Cash Flow, Operating Cycle, Financial Cycle, and Financial Leverage Ratio were used to create an indicator for the study’s development known as σ. The σ modeling factor was made through the linear regression model with fixed panels. For the model’s …
-
Treatment of meat processing wastewater for carbon, nitrogen and phosphorus removal in a sequencing batch reactor : a thesis presented in partial fulfilment of the requirements for the degree of Doctor of Philosophy in Process & Environmental Technology at Massey University
… Batch Reactor (SBR) to determine an effective operating cycle for biological carbon, nitrogen and phosphorus removal. The Activated Sludge Model No. 1 and Model No. 2 with modifications were used to simulate the treatment of meat processing wastewater using the SBR. The average values of main …
-
A conceptual framework for the assessment of the criticality of key failure modes in micro-electro mechanical systems (MEMS) accelerometers
… and the military. The MEMS production cycle can be classified as three basic steps: 1. design process, 2. manufacturing process; and 3. operating cycle. Several studies have been developed for steps 1 and 2, however, information regarding criticality analysis of operational failure …
-
DESIGN, FABRICATION, AND TESTING OF A PDMS MICROPUMP WITH MOVING MEMBRANES
… pressure distributions, and flow rate during the operating cycle of the micropump. The design simulation results showed that the movement of the wall membranes combined with rectification behavior of three nozzle/diffuser elements can minimize back flow and improve net flow in one direction. To …
-
LOW-POWER LOW-VOLTAGE ANALOG CIRCUIT TECHNIQUES FOR WIRELESS SENSORS
… of low cost, miniature desirable size and long operating cycle, passive wireless sensors which don't require battery are more preferred. Such sensors harvest energy from energy sources in the environment such as radio frequency (RF) waves, vibration, thermal sources, etc. As a result, the …
-
The manufacture and commercial applications of metastannic acid and of tin dioxide based semiconducting materials
… plant to be designed together with a proposed operating cycle as part of this work. As well as manufacturing metastannic acid Keeling and Walker Ltd. also produce a range of tin dioxide based semiconductors for industrial applications. Work was carried out in this project to try to find a …
-
The Current Shaping Modular Multilevel DC-DC Converter
… the VSMs are required to be switched in a given operating cycle enabling a frequency multiplier effect to occur whereby the effective frequency seen by the magnetics of the converter, as well as the VSM capacitors, is much greater than the switching frequency of the individual VSMs. The core …
-
Computational dynamics and virtual dragline simulation for extended rope service life
… the true response of the dragline under full operating cycle conditions. This research study advances a new and robust computational dynamic model of the dragline front-end assembly using Kane's method. The model is a 3-DOF dynamic model that describes the spatial kinematics and dynamics of …
Page 1 of 3