Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"optical and scanning electron microscope"”.

  1. Effect of particle and transfer film characteristics on the wear of polyphenylene sulfide filled with micro and nanosized particles

    … was paid to the mechanisms of material behavior and removal at the wear interface. Two size classes of filler particles were used, microsized and nanosized particles. Sliding wear and flexure tests were run on the composites followed by examination with optical and scanning electron microscope. …

    iastate Repository record for Effect of particle and transfer film characteristics on the wear of polyphenylene sulfide filled with micro and nanosized particles (opens in a new tab)

  2. Electron Beam Welding of Selective Laser Melted Inconel 718

    … bed fusion machines. This research applies Electron Beam Welding (EBW) to join SLM’ed Inconel 718 (IN718) parts by characterizing the welds based on their material and mechanical properties and comparing them with their rolled counterparts. Weld properties of the Hot Isostatically Pressed …

    tamu Repository record for Electron Beam Welding of Selective Laser Melted Inconel 718 (opens in a new tab)

  3. Influência do hidrogênio na tenacidade à fratura de junta soldada de aço 9% níquel

    … seamless pipes of 9% nickel steel in quenched and tempered condition has been used in oil industry for reinjection CO2 gas in oil pools, it is increasing the productive and does not turn the gas into the atmosphere. These lines of reinjection woks in a high pressure (550 bar) and with the …

    brazil-uerj Repository record for Influência do hidrogênio na tenacidade à fratura de junta soldada de aço 9% níquel (opens in a new tab)

  4. Modelling the M-Effect in H.R.C. Fuses

    … capacity fuse using notched strip elements and M-effect alloy, is governed by the inter-relationship between the element current distribution, the corresponding element temperature distribution, and the M-effect diffusion rate. This thesis describes a novel method which has been developed to …

    southwales Repository record for Modelling the M-Effect in H.R.C. Fuses (opens in a new tab) Download PDF for Modelling the M-Effect in H.R.C. Fuses (opens in a new tab)

  5. Effect of cast iron surface treatment on interfacial adhesion of Al/Fe compound cast structure

    … material is necessary for cost optimization and reducing environmental pollution in the automotive industry. However, the aluminum solely does not provide the desired mechanical properties such as wear-resistance and stiffness and it is needed to be combined with ferrous inserts. Compound …

    chalmers Repository record for Effect of cast iron surface treatment on interfacial adhesion of Al/Fe compound cast structure (opens in a new tab)

  6. AN EVOLUTION OF GOLD OF THE SWAUK MINING DISTRICT, LIBERTY WASHINGTON

    … the 1870’s. Gold has been mined from both lode and placer deposits. The placer deposits of Liberty area are unique due to the variety of gold textures, most notably are the nuggets of tangled masses of dendritic crystals and wire gold. This research aims to determine the paragenic sequence that …

    central-wash Repository record for AN EVOLUTION OF GOLD OF THE SWAUK MINING DISTRICT, LIBERTY WASHINGTON (opens in a new tab)

  7. MICRO-FINISHING OF EDM MACHINED DIES BY ABRASIVE JET MACHINING

    … method for the precision machining of tools and dies. Although, in recent years, much progress has been made in improving the efficiency and in the understanding of the process, there remains a number of application problems, particularly in relation to the surface integrity after machining. …

    nus Repository record for MICRO-FINISHING OF EDM MACHINED DIES BY ABRASIVE JET MACHINING (opens in a new tab) Download file for MICRO-FINISHING OF EDM MACHINED DIES BY ABRASIVE JET MACHINING (opens in a new tab)

  8. Fabrication of Single-Walled Carbon Nanotube Electrodes for Ultracapacitors

    … from bulk powders were prepared with surfactant and without surfactant by acid functionalization. SWCNT coated electrodes were then prepared from the SWCNT aqueous suspensions using various methods to create uniform nanoporous networks of SWCNTs on various substrates and stainless steel (SST) …

    waterloo Repository record for Fabrication of Single-Walled Carbon Nanotube Electrodes for Ultracapacitors (opens in a new tab)

  9. Structural integrity assessment of wire arc additively manufactured low carbon steel components for marine applications

    … significant potential to improve material design and efficiency of structural components, subsequently reducing production cost and lead times. Some industries, such as aerospace and automotive, have already employed WAAM technology into their manufacturing processes. However, insufficient testing …

    strathclyde Repository record for Structural integrity assessment of wire arc additively manufactured low carbon steel components for marine applications (opens in a new tab)

  10. Impurities and the Evaporation Morphology of Zinc Single Crystals

    <p> In this thesis the results of optical and scanning electron microscopic investigations of the evaporation morphology of zinc single crystals are presented. Dislocation etch pits developed on (0001) zinc cleavage surfaces. A mechanism is proposed to account for enhanced evaporation at decorated …

    mcmaster Repository record for Impurities and the Evaporation Morphology of Zinc Single Crystals (opens in a new tab)

  11. Optimized Fatigue And Fracture Performance Of Friction Stir Welded Aluminium Plate: A Study Of The Inter-relationship Between Process Parameters, TMAZ, Microstructure, Defect Population And Performance

    … welding parameters for any particular alloy and sheet thickness. The FSW process parameters are usually chosen empirically and their success is evaluated via simple mechanical property testing. There are severe drawbacks with such methods of determining manufacturing conditions. These include …

    plymouth Repository record for Optimized Fatigue And Fracture Performance Of Friction Stir Welded Aluminium Plate: A Study Of The Inter-relationship Between Process Parameters, TMAZ, Microstructure, Defect Population And Performance (opens in a new tab)