Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 89 for “"optical profilometry"”.
-
Wear behavior of austenite containing plate steels
… abrasion, and Bond abrasion, were examined by optical profilometry. The wear behaviors observed in topography maps were compared to the same in scanning electron microscopy micrographs and both were used to characterize the wear surfaces. Optical profilometry showed that the scratching abrasion …
-
Corrosion performance of nickel based alloy in hydrogen iodine solution
… X-ray energy dispersive spectroscopy (EDS), and optical profilometry. Corroded samples were also examined for their electrochemical corrosion properties by a cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The corrosion rates of all tested alloys increase with …
-
Electric conductivity measurements including the semiconductor-insulator interface from HVDC cables
… plates with comparable geometry. In addition, optical profilometry and microscope studies were conducted along with temperature cycling test to investigate the chosen press-film for the press-molded plates. The performed studies are presented in the report. The test set up was constructed and …
-
Digital gradient sensing and analysis of dynamic crack stability, propagation, and branching
… fracture mechanisms are evaluated using optical microscopy and optical profilometry. Significant insights are gained regarding the relationship between loading, crack branching, and the micromechanical mechanisms that govern dynamic fracture. Differences between two models for formation …
-
Surface Characterization Of Nb Cavity Sections - Understanding The High Field Q-Slope
… tools were used: SEM/EDX, XPS, AES, EBSD, optical profilometry. Based on the surface analysis several possible primary sources of the high field Q-slope have been eliminated, such as roughness, niobium oxide, and foreign contaminants. The microcrystalline structure of the cavity samples was …
-
Improvements in Microfabrication of Integrated Collagen Scaffolds Containing Embedded Microchannels Inside 3D Extracellular Matrix with 2D Basement Membrane Linings
… methods included microscopy, ImageJ analysis, optical profilometry, flow studies, and SEM imaging. Factors influencing scaffold flatness and achievable microchannel dimensions were investigated in a parametric study. Preliminary cultures evaluated scaffold viability for culturing mice brain …
-
Ion Plume Damage in Formation Flight Regimes
… Erosion depths are analyzed using white-light optical profilometry to measure potential depths up to 1 µm. This erosion data was then utilized to create (or augment) Bohdansky and Yamamura theoretical curve fits for multiple incidence angles to look at theoretical sputter effects within …
-
Surface interactions between nanoscale iron and organic material : potential uses in water treatment process units
… diffraction, scanning electron microscopy, and optical profilometry. The coated membrane samples decreased initial fouling rate by 27% and secondary fouling rate by 24%. Similarly, they displayed a 30% decrease in irreversible fouling during the initial fouling stage, and a 27% decrease in …
-
ADDITIVE MANUFACTURING OF SUPERHYDROPHOBIC STAINLESS STEEL COMPOSITES
… (SEM), powder x-ray diffraction (XRD), and optical profilometry. Although the composites were successfully mixed and printed, it was found that the surfaces remained hydrophilic due to the macroscopic nature of the surface roughness created through the LP-DED printing process. The basis for …
-
ENGINEERING SUPERHYDROPHOBIC BEHAVIOR IN 3D-PRINTED STAINLESS STEEL COMPOSITES
… sessile water drop contact angle measurements, optical profilometry, and microscopy, it was determined that all samples remained hydrophilic in nature due to insufficient surface energy modification using carbon nanotubes. However, trends indicate that further increasing CNT concentration, …
-
Experimental and simulation analysis of the jitter response of a single-shot oil switch with a high-K particle suspension
… and a suite of diagnostics such as SEM imagery, optical profilometry, water titration, mass-spectrometry, and particle measurements. This dissertation discusses several methods to successfully reduce the switch jitter of a self-break oil switch.
-
Experimental and simulation analysis of the jitter response of a single-shot oil switch with a high-K particle suspension
… and a suite of diagnostics such as SEM imagery, optical profilometry, water titration, mass-spectrometry, and particle measurements. The dissertation discusses several methods to successfully reduce the switch jitter of a self-break oil switch.
-
Understanding Tribocorrosion of Pipeline Steels: Measuring the Impact of Hydraulic Fracturing Fluid Additives on Material Loss
… experiments was accomplished through optical profilometry and scanning probe microscopy. Scanning electron microscopy (SEM) imaging has been used to study the surface of the samples after testing. Energy dispersive X-ray spectroscopy (EDX) was also used to construct compositional maps …
-
Wetting Analysis of the Ultrasonic-Assisted Soldering Process
… to generate solder lines that are imaged with optical profilometry to quantify the degree of wetting. The agreement between theory and experiment is good and we show the wetted width can be predicted as a function of the input ultrasonic power. This capability is greatly needed to automate the …
-
ADDITIVE MANUFACTURING OF STAINLESS-STEEL NANOCOMPOSITES
… sessile water-drop contact angle measurements, optical profilometry, and SEM microscopy, it was determined that the addition of GNP particles enhanced the hydrophobicity of the as-printed samples while additionally showing encouraging improvements to the hydrophobic tendencies of polished …
-
Warpage Evaluation of Double-Side Cooled Power Modules with Ceramic Stiffeners
… fabrication was characterized using 3D optical profilometry, while transient thermal measurements were used to evaluate thermal resistance and inter face performance. Results showed that increasing module rigidity reduced post-fabrication warpage magnitude, improved warpage consistency, …
-
The Impact of Crystal Orientation on Initial Stage Oxidation of Polycrystalline Nickel and Chromium
… of the oxide layer are then characterized using optical profilometry. Next, the microstructure of the metal surface is characterized by mapping grain orientations using electron backscatter diffraction (EBSD). EBSD is a technique, which allows crystallographic information to be obtained from …
-
Micro-cold spray of yttria films onto conformal surfaces
… a focused ion beam (FIB), imaged using both optical and scanning electron microscopy (SEM), and thickness measurements were taken using both the FIB cross sections and optical profilometry. Particle velocities are estimated from the measured pressures. Factors relating to the successful …
-
Synthesis and Characterization of Diamond-like Carbon Thin Films for Biomedical Applications
… Film thickness was determined by optical profilometry. Film adhesion was checked by soaking the films in simulated body fluid (SBF) and monitoring the quality of the film surface at varying time intervals using an optical microscope. DLC coatings were produced with a root mean …
-
FUNCTIONALLY GRADED ALUMINUM METAL MATRIX COMPOSITE COLD SPRAY COATINGS ON ALUMINUM 7075 SUBSTRATE
… tests were also qualitatively evaluated using optical and scanning electron microscopy, as well as optical profilometry. All four graded coating compositions experienced equal or increased adhesion strength, while failing cohesively, leaving the base cold spray composition intact (i.e., still …
Page 1 of 5