Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"optical test"”.

  1. High Resolution Optical Surface Metrology with the Slope Measuring Portable Optical Test System

    New optical designs strive to achieve extreme performance, and continually increase the complexity of prescribed optical shapes, which often require wide dynamic range and high resolution. SCOTS, or the Software Configurable Optical Test System, can measure a wide range of optical surfaces with …

    arizona-thes Repository record for High Resolution Optical Surface Metrology with the Slope Measuring Portable Optical Test System (opens in a new tab)

  2. Asphercial Metrology for Non-Specular Surfaces with the Scanning Long-Wave Optical Test System

    … embedded into the surface. Therefore, a tighter test-fab loop is needed to guide the fabrication process. To maximize the accuracy during the grinding of the surface and to minimize the working time in the polishing stage, a better metrology device that can measure rough surface is needed to …

    arizona-thes Repository record for Asphercial Metrology for Non-Specular Surfaces with the Scanning Long-Wave Optical Test System (opens in a new tab)

  3. Interaction of shear wave polarization and composite laminate layup: experiment and modeling

    … from the waste edge and use a microscope to optically verify the ply orientations on critical parts. This can add a substantial cost to the product since the test is both labor intensive and performed after the part is cured. A nondestructive teclmique which could be used to test the part …

    iastate Repository record for Interaction of shear wave polarization and composite laminate layup: experiment and modeling (opens in a new tab)

  4. Absolute Measurements of Large Mirrors

    … limited by the accuracy of the systems used to test the surfaces of such mirrors. Typically the mirror surfaces are measured by comparing their actual shapes to a precision master, which may be created using combinations of mirrors, lenses, and holograms. The work presented here develops several …

    arizona-thes Repository record for Absolute Measurements of Large Mirrors (opens in a new tab)

  5. DESIGN, MODELING AND TESTING OF OPTICAL SURFACES IN ILLUMINATION OPTICS

    … dissertation investigates design, modeling and testing methods of optical surfaces in illumination optics.The main focus of this dissertation is to investigate the faceted non-imaging specular light reflector that is often used to generate a uniform, incoherent illuminance distribution. General …

    arizona-thes Repository record for DESIGN, MODELING AND TESTING OF OPTICAL SURFACES IN ILLUMINATION OPTICS (opens in a new tab)

  6. Coherent wavelength division multiplexing: a novel transmission format for high spectral density optical communication networks

    … for use in high information spectral density optical communication networks is proposed and studied. In chapter I a historical view of fibre optic communication systems as well as an overview of state of the art technology is presented to provide an introduction to the subject area. We see …

    cork Repository record for Coherent wavelength division multiplexing: a novel transmission format for high spectral density optical communication networks (opens in a new tab)

  7. Micro Electrostatic Actuation of a Silicon Diaphragm

    … electrodes to achieve an audible response. Optical and acoustic testing was then performed on 4, 5, and 7 mm side length square diaphragms with 10 μm thickness and a 70 μm electrode gap. For the 5 mm device and a 300 V applied potential, deflection was calculated to be 4.12 μm theoretically …

    calpoly Repository record for Micro Electrostatic Actuation of a Silicon Diaphragm (opens in a new tab)

  8. High Precision Optical Surface Metrology using Deflectometry

    Software Configurable Optical Test System (SCOTS) developed at University of Arizona is a highly efficient optical metrology technique based on the principle of deflectometry, which can achieve comparable accuracy with interferometry but with low-cost hardware. In a SCOTS test, an LCD display is …

    arizona-thes Repository record for High Precision Optical Surface Metrology using Deflectometry (opens in a new tab)

  9. Applications of computer-generated holograms in optical testing

    Optical testing often requires a measurement of the phase difference between light from two different optical systems. One system is a master or reference system, and the other is a sample or test system. In the optical shop, the reference may be a precision optical surface and the test system may …

    arizona-thes Repository record for Applications of computer-generated holograms in optical testing (opens in a new tab)

  10. Silicon nitride waveguide optical filter components for access network applications

    … channel grid spacing required for the latest next generation passive optical networks (NGPON2) systems. The study of such optical filters, which tend to increase the transmission range of the directly modulated laser (DML) signal, is motivated from the research and development directed …

    ets-quebec Download PDF for Silicon nitride waveguide optical filter components for access network applications (opens in a new tab)

  11. A Machine-Learning-Enhanced, Memory- and Compute-Efficient LiDAR System-on-Chip

    … technology and validated its functionality on an optical test bench. Post-silicon measurements confirm the PU’s ability to reconstruct photon arrival distributions across a range of signal-to-noise ratios and background conditions, while maintaining small area and low power consumption. Although …

    toronto-retro Repository record for A Machine-Learning-Enhanced, Memory- and Compute-Efficient LiDAR System-on-Chip (opens in a new tab)

  12. Ultra-Precision Non-Contact Metrology for Optical Shop and Alignment Applications

    New, unconventional designs for modern optical systems strive for superior performance at lower cost and volume. These compact optical instruments, with larger fields of view and faster f-numbers, call for more challenging prescriptions to meet their ambitious requirements. Freeform optical …

    arizona-thes Repository record for Ultra-Precision Non-Contact Metrology for Optical Shop and Alignment Applications (opens in a new tab)

  13. Κατασκευή βιοαισθητήρων που στηρίζονται σε λιπιδικές μεμβράνες με συνθετικούς υποδοχείς για την ανίχνευση τοξικών ουσιών σε τρόφιμα, νερ...

    The Ph.D. thesis involved the study, design of optical and electrochemical bilayer lipid membranebased biosensors for compounds of biomedical, environmental and industrial interest. The present work reports a technique for the construction of portable devices that are based on stabilized lipid …

    greece Repository record for Κατασκευή βιοαισθητήρων που στηρίζονται σε λιπιδικές μεμβράνες με συνθετικούς υποδοχείς για την ανίχνευση τοξικών ουσιών σε τρόφιμα, νερ... (opens in a new tab)

  14. WAVEFRONT ERRORS PRODUCED BY MULTILAYER THIN-FILM OPTICAL COATINGS

    … at least two requirements that are uncommon in optical engineering: the reflectance of such mirrors must be very high (> 0.999), and the level of aberrations introduced by the mirrors is desired to be very low, typically λ/50 peak at 3.8 μ. The first requirement can be met by using multilayer …

    arizona-thes Repository record for WAVEFRONT ERRORS PRODUCED BY MULTILAYER THIN-FILM OPTICAL COATINGS (opens in a new tab)

  15. Optical interconnects for system in package by MEMS technology

    This dissertation presents a novel prototype optical interconnect system achieved by MEMS technology for stacked silicon dies. The overall approach is drawn from concepts on 3D-TSV metal interconnect and introducing an optical interconnect. Optical interconnect is a promising solution for future …

    unsw Repository record for Optical interconnects for system in package by MEMS technology (opens in a new tab)

  16. Technologies for future ground-based cryogenic gravitational-wave detectors

    … observatories use fused silica test masses, however fused silica has high mechanical loss at low temperatures, thereby motivating a transition to crystalline silicon optics and suspensions. At cryogenic temperatures, silicon has higher thermal conductivity and the coefficient of …

    anu Repository record for Technologies for future ground-based cryogenic gravitational-wave detectors (opens in a new tab)

  17. Fabrication and Characterization of new Magneto Optical Glass for magneto optical waveguide and sensing applications

    … is to fabricate and characterize new magneto-optical glasses in terms of thermal stability, mechanical property and Verdet constant for magneto-optical waveguide and sensing applications. Firstly, 3 heavy metal oxides magneto-optical (MO) glasses were fabricated and characterized including …

    poli-torino Repository record for Fabrication and Characterization of new Magneto Optical Glass for magneto optical waveguide and sensing applications (opens in a new tab)

  18. Fast and Scalable Fabrication of Microscopic Optical Surfaces and its Application for Optical Interconnect Devices

    The use of optical interconnects is a promising solution to the increasing demand for high speed mass data transmission used in integrated circuits as well as device to device data transfer applications. For the purpose, low cost polymer waveguides are a popular choice for routing signal between …

    arizona-thes Repository record for Fast and Scalable Fabrication of Microscopic Optical Surfaces and its Application for Optical Interconnect Devices (opens in a new tab)

  19. Cavitation in the cylinder-liner and piston-ring interaction in internal combustion engines

    … and cavitation visualisation in a newly designed optical engine. The main focus of the project was the design, manufacturing and assembly of an optical internal combustion reciprocating engine. The new engine has been based on the design of a 450cc Ricardo Hydra, where many parts had to be …

    city-london Download PDF for Cavitation in the cylinder-liner and piston-ring interaction in internal combustion engines (opens in a new tab)

Page 1 of 2