Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"optimum height"”.
-
Optimum height for surround recordings with height channels
… between the low channel microphones and height channel microphones in order to decide optimum height for height microphones in three-dimensional acoustic recordings. First, the thesis introduces information about the added value of the height channels in audio recording, and then it …
-
The terrestrial / photogrammetric (TP) technique for the detection and compensation of systematic height errors in block aerial triangulation
… for the detection and compensation of systematic height errors in block aerial triangulation. This technique improves the height accuracy of such triangulation by reducing the original bridging distance using new bands of corrected photogrammetric tie points as height control, together with the …
-
Drone cinematography and the generation of environment models for flight planning
… drone camera shot parameters (e.g. drone height or speed), using the subjective testing of simulated camera shots (created using Unreal Engine), is discussed and the results obtained from testing a representative set of the proposed shot types are given. <br/>For successful filming, …
-
Heat And Fluid Flow Characterization Of A Single-hole-per-row Impingement Channel At Multiple Impingement Heights
… narrow impingement channel at various jet heights with one impingement hole per row. Temperature sensitive paint and constant flux heaters are used to gather heat transfer data on the target and side walls. Jet-to-target distance is set to 1, 2, 3, 5, 7 and 9 jet diameters. The channel …
-
Design and fabrication of novel, geometrically optimised conical inline filters/strainers for use in the process industries
… holes. These filters are not designed to aide optimum flow and are made using subtractive manufacturing technologies. Research has shown that, positioning the holes right angle to the fluid flow direction and changing the manufacturing method to Additive manufacturing (AM) yielded reduction in …
-
Failure of steel gusset plates
… position of the applied load, the gusset plate height to length ratio, size, thickness, internal angle and the removal of the inside corner. The thickness of the loaded plate and its influence on the gusset plates failure is also investigated. Twenty two similar gusset plates were tested to …
-
Adult population dynamics and oviposition of northern and western corn rootworms in continuous cornfields under commercial production
… traps, were found to be dependent upon the height of sampling for both species. The optimum height of sampling for sex ratios within a field was determined to be 0.91-1.22m. The mean height of flight was estimated, and seasonal changes in sex ratios were determined for each species;Corn …
-
Rocketsonde buoy system : observing system simulation experiments
… Buoy System (RBS). The goals include the optimum deployment locations in the Pacific data void, rocketsonde sensor requirements, optimum height of the sounding profiles, number and configuration of the RBS array, real-time management requirements, daily launch times, launch periods during …
-
CARBON CYCLING AND RESTORATION IN TEMPERATE FORESTED PEATLANDS
… in investigating the conditions that fostered optimum height growth and survival of planted cedar seedlings. Planted cedar were found to grow and survive best when planted on hummocks. Additionally, a combination of protection from browse and high light maximized height growth of planted cedar. …
-
The investigation of valve operators' torque production capabilities and optimal handwheel height, angle, and opening technique
… maximum torque limits for different handwheel heights (knee, elbow, shoulder, and overhead levels) and angles (0o, 45o, and 90o); and (2) determine an optimal handwheel height and angle, in terms of operators’ maximum isometric torque exertions and the EMG activities of the same shoulder and …
-
Comparison of shockwave aerification and conventional aerification methods on athletic fields
… bluegrass, but research is lacking on what height of cut to maintain tall fescue at for an athletic field playing surface in Iowa. A two-year investigation was conducted to determine the optimum height of cut under simulated athletic traffic. Results indicate the performance of the playing …
-
Effects of riblets on the performance of the supersonic through-flow fan cascade blades
… , respectively. Three different V-grooved riblet heights were tested on the blades: 0.023, 0.033, and 0.051 mm. Riblet testing were conducted at design incidence as well as at off-design conditions (incidence angles: +5, -10 deg). The riblet effect on the performance of the STF blades was …
-
Nonlinear Flutter of Curved Panels Under Yawed Supersonic Flow Using Finite Elements
… stability boundary margins at different panel height-rises and yaw flow angles. Pre-flutter static deflection shape, flutter coalescence frequency, and damping rate of various cylindrical panels are thoroughly investigated. The main results revealed that the pre-flutter static response of …
-
Wavelength-scale dielectric diffraction gratings for light trapping in ingaas/gaas quantum well solar cells
… of designs and drawing direct comparisons with optimum silver diffraction gratings and the Lambertian light trapping limit. InGaAs/GaAs quantum well solar cells (QWSC) form the material system which facilitates this study, wherein the wavelengths longer than the bandgap of GaAs (873 nm), that …
-
Studies on the occurrence, distribution and progression of periodontitis
… view was taken for each patient, and the height of alveolar bone at each proximal surface was calculated with a transparent ruler using the crown tip and root apex as reference points. The ruler was calibrated to score bone loss in 'quarters' of optimum bone height (Bjorn & Holmberg, …