Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"optimum polymer"”.

  1. Determination Of Optimum Polymer Dose For Grand Forks Wastewater Treatment Plant Lagoon Sludge Dewatering

    … will be dewatered and will be used beneficially. Polymers are used for coagulating sludge solid particles for better dewatering and bear a major part of cost associated with the dewatering process. So, choice of the appropriate polymer for dewatering and determining the optimum dose is very …

    nodak Repository record for Determination Of Optimum Polymer Dose For Grand Forks Wastewater Treatment Plant Lagoon Sludge Dewatering (opens in a new tab)

  2. Municipal sludge dewatering using a belt filter press

    … aerobically digested sludges to determine the optimum polymer conditioning for a belt filter press The optimum polymer dosages for all three zones of a belt filter press were compared with each other to determine the best overall conditioning. The requirements of all three zones of a belt …

    vt Repository record for Municipal sludge dewatering using a belt filter press (opens in a new tab)

  3. The Effect of Cations on Volatile Solids Destruction, Odors, and Dewatering in anaerobic digestion

    … with 30 days of SRT. Conditioning with cationic polymer and dewatering simulating a high solids centrifuge were performed after digestion. It was found that volatile solids destruction and volatile organic sulfur compounds generation increased proportionally as iron content in influent increased. …

    vt Repository record for The Effect of Cations on Volatile Solids Destruction, Odors, and Dewatering in anaerobic digestion (opens in a new tab)

  4. Effects of Polymers on short-and long-term dewatering of oil sands tailings

    … a large volume of tailings. Although the polymers have been found to improve the release of water from the tailings and accelerate the dewatering and settling processes in the short-term, longer-term dewatering processes such as consolidation are crucial for making the tailings deposits …

    carleton Repository record for Effects of Polymers on short-and long-term dewatering of oil sands tailings (opens in a new tab)

  5. Development and Evaluation of Ternary Amorphous Solid Dispersion of Poorly Water-soluble Compounds

    … TASD containing CUR and RES with a hydrophilic polymer. Methods: Choosing an optimum polymer can be considered as one of the most crucial activities during TASD development. We carried out commonly used polymer screening studies i.e. miscibility, crystallization tendency, Flory-Huggins …

    creighton Repository record for Development and Evaluation of Ternary Amorphous Solid Dispersion of Poorly Water-soluble Compounds (opens in a new tab)

  6. Flocculation of Metal Hydroxides with Polymers - Optimization and Kinetic Modelling

    <p>This study determined optimum conditions for the use of polymers in flocculation of metal hydroxides present in neutralized mine drainage. Using the criterion of supernatant particulate metal concentration following flocculation and settling, optimum polymer properties and mixing conditions were …

    mcmaster Repository record for Flocculation of Metal Hydroxides with Polymers - Optimization and Kinetic Modelling (opens in a new tab)

  7. Measurement of Polymer Concentration and Optimization of Sludge Dewatering Using UV-VIS Spectroscopy

    … UV-Vis spectroscopy to measure and optimize the polymer dose during water and wastewater treatment. Residual polymer concentrations were also measured using two other methods (N-Bromination and Dye Method) and results were compared with the UV-Vis method. UV-Vis method was found to be more …

    carleton Repository record for Measurement of Polymer Concentration and Optimization of Sludge Dewatering Using UV-VIS Spectroscopy (opens in a new tab)

  8. Sludge Treatment by Supercritical Water Oxidation and the Optimization of Operational Conditions

    … of sludge temperature (10 oC -100 oC) on the optimum polymer dose and conditioning of wastewater sludge. In the second phase, SCWO treatment of sludge was investigated under a range of operational conditions including sludge solids content (2-12 %), TBC concentration (0.1-1 %), reactor …

    carleton Repository record for Sludge Treatment by Supercritical Water Oxidation and the Optimization of Operational Conditions (opens in a new tab)

  9. UV-vis spectroscopy as a tool for the detection of residual polymer and optimization of polymer dose in drinking water treatment applications

    The optimization of polymer dose during the coagulation and flocculation stages of drinking water treatment remains a challenge for treatment plants. Incorrect polymer dosage can lead to negative effects downstream, environmental effects, negative health effects and increased polymer costs. …

    carleton Repository record for UV-vis spectroscopy as a tool for the detection of residual polymer and optimization of polymer dose in drinking water treatment applications (opens in a new tab)

  10. Towards Real-time sludge dewatering process optimization using ultraviolet-visible spectrophotometry and torque rheology

    … of UV-Vis spectrophotometry for the detection of polymer in dewatered sludge supernatant. The second study developed a two-stage in-line and real-time optimum polymer dose monitoring system. This system employed torque rheology as the upstream monitor and UV-Vis spectrophotometry as the downstream …

    carleton Repository record for Towards Real-time sludge dewatering process optimization using ultraviolet-visible spectrophotometry and torque rheology (opens in a new tab)

  11. A Study on Polymer-induced Flocculation in Industrial Wastewater Treatment Via a High-throughput Method

    … amount of organic matter present in a solution. Polymer flocculation is a common mechanism used for solid-­liquid separation in industrial wastewater treatment. While many previous research studies have been previously conducted on polymer flocculation and industrial wastewater treatment, there …

    mcmaster Repository record for A Study on Polymer-induced Flocculation in Industrial Wastewater Treatment Via a High-throughput Method (opens in a new tab)

  12. Effect of conditioning on the performance of a plate and frame filter press

    … and aerobically digested sludges to determine optimum polymer dosages for various mixing intensities produced during conditioning by a high-stress mixing unit. Mean velocity gradient (G) values were established for each of the mixing speeds used ranging from 250 sec-1 to 4,000 sec-1. Using the …

    vt Repository record for Effect of conditioning on the performance of a plate and frame filter press (opens in a new tab)

  13. The effect of polymer dose and mixing intensity on sludge dewatering with a plate and frame filter press

    … filter press performance over a range of polymer doses and under a variety of sludge and polymer mixing conditions. In addition, bench-scale polymer dosing and mixing experiments were conducted with the same sludge samples to determine the relationship between the bench-scale tests and …

    vt Repository record for The effect of polymer dose and mixing intensity on sludge dewatering with a plate and frame filter press (opens in a new tab)

  14. Development of Continuous Bio-composite Fibres

    … combination of wood pulp or lignin and synthetic polymers, using continuous electrospinning and extrusion processes. The electrospun composite fibres have potential application in filtration, wound dressing, non-woven fabrics and support of thin polymeric separation membranes. Lignin fibres could …

    toronto-retro Repository record for Development of Continuous Bio-composite Fibres (opens in a new tab)

  15. Geotextile Design and Performance for Dewatering of Rare Earth Element Sludge Produced from Acid Mine Drainage

    … containing sizes of 8.5x10-5mm and to analyze polymer dosage effects on dewatering and filtration. Small-scale performance testing was completed using double-lined geobags to analyze and predict large scale dewatering of the composite geotextile system. Consolidation testing was performed …

    wvu Repository record for Geotextile Design and Performance for Dewatering of Rare Earth Element Sludge Produced from Acid Mine Drainage (opens in a new tab)

  16. The Effect of Blend Composition on Bulk Heterojunction Organic Solar Cells

    … scale with amorphous PCPDTBT chains. The optimum polymer:fullerene blend composition (2:7) occurs at high PC71BM concentrations. This is required to facilitate efficient electron transport. The second system was composed of a ternary blend of P3HT:Si-PCPDTBT:PC71BM. A threshold polymer …

    unsw Repository record for The Effect of Blend Composition on Bulk Heterojunction Organic Solar Cells (opens in a new tab)

  17. Improving platelet storage bags : antifouling polymer coatings, antimicrobial peptides and surface topography

    … are introduced. In Chapter 2 some hydrophilic polymer brushes are developed on platelet bag surfaces and characterized. Polymer coatings made of poly(N,N-dimethylacrylamide) (PDMA) and a copolymer of DMA and N-(3-aminopropyl)methacrylamide hydrochloride (APMA) (DMA/APMA: 5/1) could inhibit …

    ubc Repository record for Improving platelet storage bags : antifouling polymer coatings, antimicrobial peptides and surface topography (opens in a new tab) Download PDF for Improving platelet storage bags : antifouling polymer coatings, antimicrobial peptides and surface topography (opens in a new tab)

  18. Polyacrylic acid for repair of leaky wellbores in CO₂ storage formations and possible applications to sediment deformation studies

    … formation to hold CO₂ over the long term. The polymer has low viscosity as long as the pH remains below a threshold value, which is dependent on the concentration of the polymer. The polymer particles swells up to thousand folds of their initial volume and the viscosity increases several order …

    texas Repository record for Polyacrylic acid for repair of leaky wellbores in CO₂ storage formations and possible applications to sediment deformation studies (opens in a new tab)

  19. Anaerobic / Aerobic Digestion for Enhanced Solids and Nitrogen Removal

    … the dewatering capabilities, with lower optimum polymer dose, reduced CST and increased cake solid concentration, and reduce the odor generation from the biosolids. Both An/Aer/Ana – A and An/Aer/An – B gave 70% VS removal, compared to 50% with single MAD and 62% with only Ana/Aer. COD …

    vt Repository record for Anaerobic / Aerobic Digestion for Enhanced Solids and Nitrogen Removal (opens in a new tab)

  20. Batch and continuous production of stable dense suspensions of drug nanoparticles in a wet stirred media mill

    … To prevent aggregation of nanoparticles, polymers and surfactants are dissolved in water acting as stabilizers via adsorption onto the drug crystals. In the last two decades, ample experimental data were generated in the area of wet stirred media milling for the production of drug …

    njit Repository record for Batch and continuous production of stable dense suspensions of drug nanoparticles in a wet stirred media mill (opens in a new tab)

Page 1 of 2