Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 77 for “"orthotropic material"”.

  1. Topology and Printing Orientation Optimization of Orthotropic Material for Additive Manufacturing

    … the fibers of the printed structures (principal material axes). A modified SIMP (modified solid isotropic material with penalization) method is used with the method of moving asymptotes (MMA) as the optimizer. A detailed description of the formulation and sensitivity analysis are discussed. 2D …

    york Repository record for Topology and Printing Orientation Optimization of Orthotropic Material for Additive Manufacturing (opens in a new tab)

  2. Three dimensional topology optimization with orthotropic material orientation design for additive manufacturing structures.

    … often have anisotropic microstructures that form material layers are added during processing. Carbon fiber filled polymer deposited in beads with the Fused Filament Fabrication (FFF) process, for example, has been shown to have a highly anisotropic material response. This thesis considers the …

    baylor Repository record for Three dimensional topology optimization with orthotropic material orientation design for additive manufacturing structures. (opens in a new tab)

  3. Linear elastic mesh deformation via localized orthotropic material properties optimized by the adjoint method

    … to this mesh movement problem by attributing orthotropic material properties individually to each node or element. This technique allows each node or element to behave differently under the stress of conforming to the boundary. These localized material properties are determined using the …

    utc Repository record for Linear elastic mesh deformation via localized orthotropic material properties optimized by the adjoint method (opens in a new tab)

  4. An Optimization Technique Applied to the Determination of Orthotropic Material Properties Using Dynamic Response Test Data

    A knowledge of the behavior of a material under loading similar to expected service loading is required before that material can be used effectively in the design process. Without sufficient mechanical properties data, the design process degenerates to a time consuming and often costly "build, test …

    byu Repository record for An Optimization Technique Applied to the Determination of Orthotropic Material Properties Using Dynamic Response Test Data (opens in a new tab) Download PDF for An Optimization Technique Applied to the Determination of Orthotropic Material Properties Using Dynamic Response Test Data (opens in a new tab)

  5. Improvement of the axial buckling capability of elliptical cylindrical shells

    … and novel buckling analysis of an axially-loaded orthotropic circular cylindrical shell is formulated. The analysis assumes prebuckling rotations are negligible and uses a unique re-defining of the orthotropic material properties in terms of a so-called geometric mean isotropic (GMI) material. …

    vt Repository record for Improvement of the axial buckling capability of elliptical cylindrical shells (opens in a new tab)

  6. Flanking transmission over CLT joints

    … timber (CLT) popularity as a construction material, sound transmission control has been considered one of the greatest challenges. Flanking noise transmission over the junction elements takes a high portion of the problem. The existing research is focused on the vibroacoustic aspects of the …

    chalmers Repository record for Flanking transmission over CLT joints (opens in a new tab)

  7. Methodology for predicting microelectronic substrate warpage incorporating copper trace pattern characteristics

    … mismatches in the thermomechanical properties of materials used can lead to warpage, hindering these goals. Warpage can be problematic as it leads to misalignments during package assembly, reduced tolerances, and a variety of operational failures. Current warpage prediction techniques utilize …

    gatech Repository record for Methodology for predicting microelectronic substrate warpage incorporating copper trace pattern characteristics (opens in a new tab)

  8. Numerical Model for the Lateral Compression Response of a Plastic Cup

    … and ABAQUS/Standard. The high impact polystyrene material of the cup is modeled as linear elastic, considering isotropic and orthotropic material behavior. The structural model of the cup is a truncated conical shell including a ring at the open end of the cup and circumferential stiffening ribs. …

    vt Repository record for Numerical Model for the Lateral Compression Response of a Plastic Cup (opens in a new tab)

  9. An exact plane-stress solution for a class of problems in orthotropic elasticity

    … the stress field within a rectangular slab of orthotropic material is found using a two-dimensional Fourier series formulation. The material is required to be in plane stress, with general stress boundary conditions, and the principle axes of the material must be parallel to the sides of the …

    vt Repository record for An exact plane-stress solution for a class of problems in orthotropic elasticity (opens in a new tab)

  10. Characterization and Optimization of Thermal Protective Fabrics Designed to Protect Against Splash Hazards

    … it was determined that that the use of an orthotropic material in which the thermal conductivities in the radial and axial directions are different can be used to decrease the amount of heat transferred through the fabric and thereby increase amount of protection in PPE. An orthotropic …

    byu Repository record for Characterization and Optimization of Thermal Protective Fabrics Designed to Protect Against Splash Hazards (opens in a new tab) Download PDF for Characterization and Optimization of Thermal Protective Fabrics Designed to Protect Against Splash Hazards (opens in a new tab)

  11. Nonlinear Modeling of a Sustainable Material

    … a nonlinear constitutive model for a sustainable orthotropic material. Existing methods for constitutive models of wood were improved upon to include the nonlinear stress-strain response not only in the two orthogonal axes but at any orientation to the strong axis of the material. This method also …

    calpoly Repository record for Nonlinear Modeling of a Sustainable Material (opens in a new tab)

  12. An Optimization Technique Applied to the Determination of Modal Damping Coefficients

    … (1). Mr. Webster undertook the determination of orthotropic material properties using dynamic response test data from plates. A major difficulty which was encountered was the enormous amount of computer time required for the simulation. This thesis is an investigation of a method which when fully …

    byu Repository record for An Optimization Technique Applied to the Determination of Modal Damping Coefficients (opens in a new tab) Download PDF for An Optimization Technique Applied to the Determination of Modal Damping Coefficients (opens in a new tab)

  13. Constitutive modelling and computational simulation of nip mechanics and winding of paper rolls

    … with interlayer slippage for wound rolls of orthotropic material is developed. The constitutive behaviour of the roll is modelled using the theory of plasticity, with plastic shear deformation used to describe the layer-to-layer slippage. The model can be readily implemented in a modern …

    aalto Repository record for Constitutive modelling and computational simulation of nip mechanics and winding of paper rolls (opens in a new tab)

  14. A PROBABILISTIC FATIGUE FAILURE ANALYSIS OF LAMINATED COMPOSITE MATERIALS (DAMPING, RANDOM YIELDING, HYSTERESIS, ENERGY)

    … the prediction of the fatigue life of composite materials is presented in this dissertation. Failure is characterized by the accumulation of plastic work to a critical level. Energy accumulation is obtained by calculating hysteretic energy using a probabilistic approach. This approach uses a two …

    nebraska Repository record for A PROBABILISTIC FATIGUE FAILURE ANALYSIS OF LAMINATED COMPOSITE MATERIALS (DAMPING, RANDOM YIELDING, HYSTERESIS, ENERGY) (opens in a new tab)

  15. Multiphysics Optimization of Fuel Cell Hardware Considering Aircraft Operating Conditions

    … on optimization scenarios of isotropic and orthotropic material systems based on aircraft thermal load duty cycles and cell stack compression requirements. Multiscale material characterization of a Bismaleimide-Standard Modulus (BMI-SM) Carbon composite system was also performed to obtain …

    queens Repository record for Multiphysics Optimization of Fuel Cell Hardware Considering Aircraft Operating Conditions (opens in a new tab)

  16. Updating low-profile FRP deck FE model using experimental modal analysis

    … The FRP deck used is a new system and has orthotropic material properties, therefore an FE model of deck that is validated through experimental data will ensure confidence in results obtained from the FE model. Experimental modal analysis (EMA) was used to verify and update the FE model of …

    wvu Repository record for Updating low-profile FRP deck FE model using experimental modal analysis (opens in a new tab)

  17. Single-Element Characterization of the LS-DYNA MAT54 Material Model

    … the root behavior of the LS-DYNA MAT54 composite orthotropic material model. This primarily involved investigating the constitutive relations, ply failure (damage onset), ply deletion, damage factors, and element deletion. A single shell element under uniaxial tensile and compressive loading was …

    washington Repository record for Single-Element Characterization of the LS-DYNA MAT54 Material Model (opens in a new tab)

  18. Multidimensional Modeling of Pyrolysis Gas Transport Inside Orthotropic Charring Ablators

    … the payload from overheating, charring ablative materials are favored to be applied as the heat shield at the exposing surface of the vehicle. Accurate modeling not only prevents mission failures, but also helps reduce cost. Existing models were mostly limited to one-dimensional and discrepancies …

    uky-thes Repository record for Multidimensional Modeling of Pyrolysis Gas Transport Inside Orthotropic Charring Ablators (opens in a new tab)

  19. Wave propagation in a semi-infinite, cylindrical, orthotropic membrane

    … cylindrical membrane of fiber-reinforced material with the fibers oriented helically along the membrane is considered. The equations of motion are written in terms of the orthotropic material properties and are solved for the condition of indeterminancy in the second derivatives of the …

    vt Repository record for Wave propagation in a semi-infinite, cylindrical, orthotropic membrane (opens in a new tab)

  20. Multiscale Optimization of Weav3D Lattice-Reinforced Composites for Lightweight Structural Design

    … enabling strategic reinforcement placement. Material properties of the carbon fiber tapes were first experimentally characterized through mechanical testing on a universal testing machine (UTM), with strain fields measured using Digital Image Correlation (DIC). These validated properties …

    washington Repository record for Multiscale Optimization of Weav3D Lattice-Reinforced Composites for Lightweight Structural Design (opens in a new tab)

Page 1 of 4