Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 48 for “"overhead crane"”.
-
Dynamic Model of an Overhead Crane
In this thesis a novel spatial model of an overhead crane was developed. The model includes: bridge, trolley, driving and follower wheels for the bridge and trolley, drum, cable, and the payload. The model accounts for the winding/unwinding of the cable around the drum as the payload is …
-
Automation and virtual commissioning of an overhead crane
… a material handling procedure carried out by an overhead crane that delivers materials to melting furnaces has been identified as eligible for automating. The material is taken from what is referred to as a scrapyard where the inventory of metals is kept which is then gathered by a crane …
-
Dynamic analysis of an overhead crane carrying a canister by finite element method
A finite element model for an overhead crane carrying a nuclear waste canister is developed. This model is used to perform the static, dynamic and impact analysis using the finite element software COSMOS/M. Static results are compared with simplified model solutions to verify the accuracy of the …
-
Investigation of Lateral Load Sharing in Rectangular Framed Mill Buildings with Overhead Crane Systems
… design practices for mill buildings with overhead crane systems do not take into account distribution of lateral load from the crane system to all frames in the structure. This research investigates the effects of lateral restraint provided by the entire structure on the design of …
-
Design of a fuzzy logic controller for swing-damped transport of an overhead crane payload
Transportation using overhead cranes can excite undesirable payload swinging. These oscillations have to be damped before other payload manipulation is done. A swing-damped motion profile based on the natural frequency of the payload is used to minimize swing excitation. In addition, a fuzzy logic …
-
Overhead crane control for obstacle avoidance and a learning algorithm for non-minimum phase systems
… one is a control method for a 3-dimensional overhead crane. Learning control is an iterative approach to find the control input which can generate the system output as close as possible to the desired output trajectory through the repetitions of learning trials. In this thesis, learning …
-
Investigating the perceived service quality expectations of Sibanya platinum mining : a case of the (South African) overhead crane industry
… service-quality expectations delivered by the overhead-crane industry to Sibanye-Stillwater's Southern Africa PGM operations (for the purpose of this study, 'Sibanye platinum') in the North-West province, South Africa. Overhead-cranes are essential to customer operations to ensure cost savings, …
-
Quantification of Muscular, Postural, and Upper Limb Movement Demands During Overhead Crane Operation to Evaluate the Potential Efficacy of a Camera Based System
Crane operators work long hours in constrained workspaces requiring awkward postures. Neck extension, trunk flexion and repetitive arm movement have been associated with an increased risk of developing neck and shoulder pain. Biomechanical and physiological loads of crane operators were quantified …
-
Anti-swing control of overhead cranes
Overhead cranes are widely used for transporting large and heavy suspended objects such as shipping containers. Acceleration and deceleration of the crane generally induce swinging motion in the suspended payload. A method is presented to find the trajectory for an overhead crane that will ensure …
-
Design for Assembly Methods for Large and Heavy Plates: An experimental Design
… operator. Material handling devices such as Jib cranes or overhead cranes are employed to help operators work safer and, in some cases, faster. However, during full-load productions, these devices could become limited and insufficient resources and hence, delay or extend the cycle times. Not only …
-
Advanced Discrete-Time Control Methods for Industrial Applications
… thesis deals with the modeling and control of overhead crane systems for high-performance automatic operation. To be able to achieve high-speed load transportation with high precision in load positioning as well as minimizing load swings, a new modeling approach is developed based on …
-
Advanced modeling & optimal control of a cart-double pendulum system
… OF MISSOURI-COLUMBIA AT AUTHOR'S REQUEST.] The Overhead Crane has evolved in scope since its inception in the late 1800's. Its early use as a hoist for material transport is now proceeded by new found applications, such as in the Active Response Gravity Offload System (ARGOS) at the NASA Johnson …
-
Monitoring strategies in adaptive sliding mode control and event-triggered extremum seeking
… the application to Anti-lock Braking System and Overhead-crane to illustrate the advantages of the proposed adaptive control strategies. Finally, based on static maps, this thesis proposes event-triggered schemes for both scalar and multivariable extremum seeking. While the extremum seeking …
-
Simulation and Evaluation of Alternative Workflows at Cross Laminated Timber Factory, Developing a DES Model Aiming to Improve the Loading Process in a New Factory
… state on the CNC machines, utilization of overhead cranes and operators, cycle times for panels trough production and cycle time between trailers and the number of products produced. The results indicates that the changes have a positive impact. The scenario with both changes has lower …
-
Discovering the Digital Twin Web - From singular applications to a scalable network
… products, specifically for an industrial overhead crane. However, during the work, it turned out that the existing tools and techniques did not allow the scalability required to create a twin for each manufactured product, suggesting that a more ground-up research approach was required. …
-
API-based Digital Twins - Architecture for Building Modular Digital Twins Following Microservices Architectural Style
… implementation of the architecture for an overhead crane. The architecture enables using existing systems to implement digital twin and makes the digital twin data available from a single interface. In the API-based digital twin architecture, digital twins consist of separate software …
-
Reduce maintenance resources and increase plant availability by utilising web-based condition monitoring systems and Markovian modeling techniques
… Canary) was installed on a critical overhead crane in a pilot plant (ESM) to test the feasibility of the system in the steel production environment. This research also aims to elaborate on the outlook of the current global steel market as well as present the author's views on the …
-
A retrospective analysis of nickel exposure data at a South African base metal refinery
… North and South end, Contractor's tea room, Overhead crane and occupation categories: Cell worker, Crane driver, Supervisor, Miscellaneous activities) independently. One-way analyses of variances (ANOVA) were conducted to identify significant differences in exposures over time, and the trends …
Page 1 of 3