Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 226 for “"oxide surfaces"”.

  1. Reconstructing oxide surfaces.

    The work presented here is concentrated on surfaces and interfaces in alumina (Al2O3), anorthite (CaAl2Si2O8), silica (SiO2) and rutile (TiO2). While each of these materials have different crystal structures and measurable properties, they all exhibit similar mechanisms for fundamental behavior. …

    umn Repository record for Reconstructing oxide surfaces. (opens in a new tab)

  2. Functional Metal Oxide Surfaces

    … in the field of green chemistry. Titanium (IV) oxide (TiO2) photocatalyst has been widely investigated in comparison to other metal oxide semiconductors due to its high activity, low cost, and high chemical and physical stability. On the other hand, TiO2 is also preferable materials in some …

    cau-kiel Repository record for Functional Metal Oxide Surfaces (opens in a new tab)

  3. Molecules and Clusters on Oxide Surfaces

    … study the fundamental interactions between model oxidesurfaces and either organic, mixed organic/inorganic, or purely inorganic adsorbate layers. As model oxidesurfaces have served the rutile TiO2(110) surface and an in-situ grown iron oxide film supported by a Pt(111)surface. It is found that the …

    lund Repository record for Molecules and Clusters on Oxide Surfaces (opens in a new tab) Download PDF for Molecules and Clusters on Oxide Surfaces (opens in a new tab)

  4. Defects on transition metal oxide surfaces

    … on a solitary and well-defined transition metal oxide surface phase. Under certain oxidizing UHV conditions, however, it is possible to produce, isolate and characterize several structurally and electronically different transition metal oxide species. The creation of stoichiometric surfaces of …

    nebraska Repository record for Defects on transition metal oxide surfaces (opens in a new tab)

  5. The interaction of alkali metals with oxide surfaces

    … interactions of Li and Na with SrTiO₃ surfaces from the perspectives of structure (STM), chemistry (XPS), and quantum mechanics (DFT). Li and Na were deposited onto a variety of SrTiO₃ reconstructions on the (001) and (111) terminations in UHV using an in-house-built UHV evaporator. …

    oxford Repository record for The interaction of alkali metals with oxide surfaces (opens in a new tab)

  6. Infrared studies of selected reactions on oxide surfaces.

    This thesis has been concerned with some aspects of the reactions of SO$\sb2$ and H$\sb2$S over various catalysts, and it has been peripherally concerned with the use of probe molecules to study the surface structure of silica. The major experimental technique has been infrared spectroscopy, …

    ottawa-retro Repository record for Infrared studies of selected reactions on oxide surfaces. (opens in a new tab)

  7. INTERACTIONS OF ANILINE OLIGOMERS WITH IRON OXIDE SURFACES

    … metal substrates, without considering the native oxide film. In order to develop smart coatings (has redox activity and self-healing ability) for iron and steel, one must first understand how these oligomers interact with the native iron oxide film. In this thesis, we develop new knowledge from …

    mcmaster Repository record for INTERACTIONS OF ANILINE OLIGOMERS WITH IRON OXIDE SURFACES (opens in a new tab)

  8. Characterizing Heterogeneously Charged Mineral Oxide Surfaces Using Nonlinear Spectroscopy

    Mineral oxide/aqueous interfaces play an important role in the transport of water through aquafers and streams, erosion, the formation of beaches and river deltas, nuclear waste storage, the sequestration and filtration of small ions, and are widely used in industrial scale catalysis. Unlike metal …

    temple Repository record for Characterizing Heterogeneously Charged Mineral Oxide Surfaces Using Nonlinear Spectroscopy (opens in a new tab)

  9. Physical properties of metal-oxide surfaces for CO2 valorisation

    L'abstract è presente nell'allegato / the abstract is in the attachment

    poli-torino Repository record for Physical properties of metal-oxide surfaces for CO2 valorisation (opens in a new tab)

  10. Computational Analysis of Photocatalytic Nitrogen Fixation on Oxide Surfaces

    … on pristine, oxygen vacant, and iron doped surfaces at room temperature. While oxidation appears thermodynamically feasible, it is hypothesized that kinetic barriers will make it challenging in practice. An alternative strategy of doping the surface with transition metals is also …

    gatech Repository record for Computational Analysis of Photocatalytic Nitrogen Fixation on Oxide Surfaces (opens in a new tab)

  11. Spectroscopic characterization of alkylsilanes on metal and oxide surfaces

    … chemistry of alkylsilanes on metal and oxide surfaces, specifically Ag and silica, respectively. A variety of surface analysis tools, including FTIR and Raman spectroscopies, electrochemistry, ellipsometry, and x-ray photoelectron spectroscopy, have been applied to study important …

    arizona-thes Repository record for Spectroscopic characterization of alkylsilanes on metal and oxide surfaces (opens in a new tab)

  12. Imaging of nanoparticles and nanocrystal interactions with oxide surfaces

    Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2016-03-02 without embargo terms

    uiuc Repository record for Imaging of nanoparticles and nanocrystal interactions with oxide surfaces (opens in a new tab)

  13. Electron stimulated desorption of hydronium ions from chromium oxide surfaces

    … steel and chromium increases the amount of hydroxides at the surface, while heating and electron bombardment reduce them.

    wm-mary Repository record for Electron stimulated desorption of hydronium ions from chromium oxide surfaces (opens in a new tab)

  14. Formation and characterisation of phospholipid bilayers on metal oxide surfaces /

    … (tBLM). In this work, thin film cadmium tin oxide and fluorine doped tin oxide (FTO) surfaces were used as alternatives for typically used gold surfaces for the formation of bilayers. The formation of self-assembled monolayer (SAM) on oxide surfaces was achieved via silane chemistry that …

    vilnius Repository record for Formation and characterisation of phospholipid bilayers on metal oxide surfaces / (opens in a new tab)

  15. Adsorbate-enhanced Corrosion Processes at Iron and Iron Oxide Surfaces

    This study was intended to provide a fuller understanding of the surface chemical processes which result in the corrosion of ferrous materials.

    unt Repository record for Adsorbate-enhanced Corrosion Processes at Iron and Iron Oxide Surfaces (opens in a new tab)

  16. Sulfur-induced Corrosion at Metal and Oxide Surfaces and Interfaces

    Sulfur adsorbed on metallic and oxide surfaces, whether originating from gaseous environments or segregating as an impurity to metallic interfaces, is linked to the deterioration of alloy performance. This research dealt with investigations on the interactions between sulfur and iron or iron alloy …

    unt Repository record for Sulfur-induced Corrosion at Metal and Oxide Surfaces and Interfaces (opens in a new tab)

  17. Electrochemical Depostion of Bismuth on Ruthenium and Ruthenium Oxide Surfaces

    … structure consistent with RuO2. a hydrated oxide film (RuOx?(H2O)y) was made by holding 1.3V on the surface of the film in H2SO4 for 60 seconds and was determined to be amorphous. Underpotential deposition of Bi was observed on the metallic surfaces and the electrochemically oxidized …

    unt Repository record for Electrochemical Depostion of Bismuth on Ruthenium and Ruthenium Oxide Surfaces (opens in a new tab)

  18. Surface Raman scattering of organically-modified metal and oxide surfaces.

    … surface chemistry of organosilanes at metal and oxide surfaces, specifically Ag, Au, SiO₂, and Al₂O₃. A combination of surface Raman spectroscopy, electrochemistry, scanning electron microscopy, x-ray photoelectron spectroscopy, and ellipsometry have been employed to study several important …

    arizona-thes Repository record for Surface Raman scattering of organically-modified metal and oxide surfaces. (opens in a new tab)

  19. Paramagnetic Transition Metal Ions on Oxide Surfaces: an EPR Investigation

    … I worked on systems that cover a number of oxide-supported TMIs by means of electron paramagnetic resonance (EPR) spectroscopy. In this thesis I investigated the paramagnetic Cr(V) and Cr(III) species in the Phillips catalyst. The Cr(III) species were suggested with possible relevance to the …

    qucosa-diss

Page 1 of 12