Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"pack cementation"”.
-
Synthesis of silicides for thermoelectric applications by innovative methods
… mass production is of great importance. The pack cementation method falls into this category and could be easily adapted by the industry for silicide preparation. The purpose of this dissertation is to explore the prospects of preparing high-performance HMS-based and Mg2Si-based …
-
Ελεγχόμενη ανάπτυξη επιστρώσεων υλικών με χημική εναπόθεση καθώς και με άλλες εναλλακτικές μεθόδους, μελέτη των δομικών, μηχανικών ιδιοτ...
… deposition methods were chemical deposition by pack cementation and fluidized bed and deposition by flame spray. The examination of the as formed coatings was accomplished by electron microscopy methods and X‐ray diffraction analysis (XRD). The deposition mechanism assessment was accomplished by …
-
Ανάπτυξη επικαλύψεων με την μέθοδο της χημικής εναπόθεσης ατμών στερεάς κλίνης για θερμοηλεκτρικές και αντιδιαβρωτικές εφαρμογές
… The coating process was accomplished by Pack Cementation. In any case the optimal deposition temperature and holding time was researched. For Mg and Al coatings the phases with the minor negative effect on the electric properties of copper were formed. For the Ti coatings it is the first …
-
High temperature coatings based on β-NiAl
… coating process based on electroplating and pack cementation was used to synthesize β-NiAl coatings on top of the Mo-Ni-Al alloys. These coatings were seen to be stable when exposed to expected operating conditions, and substantially improved the oxidation resistance of the Mo-Ni-Al alloys. …
-
M5Si3 (M=Ti, Nb, Mo) based transition-metal silicides for high temperature applications
… Si/Ti activity ratio.;MoSi2 coating developed by pack cementation to protect Mo-based Mo-Si-B composites was found to be effective up to 1500ºC. Shifting coating composition to T1+T2+Mo3Si region showed the possibility to extend the coating lifetime above 1500ºC by more than ten times via …
-
Development of Porous Metal-supported Solid Oxide Fuel Cells
… must be protected from oxidation. Therefore, the pack cementation method was used to apply a layer of aluminum onto the metal substrate. Variables such as temperature and exposure time of the coating materials were investigated in this thesis.</p>
-
Corrosion behaviour of aluminised steel and conventional alloys in simulated aluminium smelting cell environments
… was developed on low carbon steel A06 using pack cementation technique. Yttria (Y2O3) was also used to improve the corrosion resistance of coating. Kinetics of the coating formation were studied. XRD, FESEM and FIB were employed to investigate the phase constitution and the surface …
-
Effect of roughness, microstructure, and chemistry on the environmental durability of structural alloys
… with more complex geometries, low temperature pack cementation of ferrous alloys was conducted. Preliminary data did show an improvement in anti-fouling properties with both model asphaltenes in a static environment, as well as with crude oil in a hydrodynamic environment. However, XPS revealed …
-
Design and characterisation of metallic bipolar plates for proton exchange membrane fuel cells
… process and chromised coatings deposited by pack cementation in PEMFC environments. CoBlast™ coated metals exhibited high ICR and low corrosion resistance in 0.5 M H2SO4 + 2 ppm HF. Hence, it was unsuitable for PEMFC BP application. Post chromising of CoBlast™ coated stainless steel at 900oC …
-
TRANSITION METAL COATINGS FOR ENERGY CONVERSION AND STORAGE; ELECTROCHEMICAL AND HIGH TEMPERATURE APPLICATIONS
… atmosphere at elevated temperature. Using pack cementation, diffusion coatings of thickness approximately 12 and 20 µm are obtained for Ti and Zr, respectively. The effects of heating to 950°C for 24 hr in 5% O2 in He are studied in situ by thermogravimetric analyses (TGA), and ex situ by …
-
In-situ surface modification of multi-principal element alloys for enhanced durability in extreme environments
… Coatings produced via Si- and Fe-Cr-Si-based pack cementation (PC) and Fe-Cr-Si slurry deposition were explored on a family of refractory MPEAs containing up to five refractory elements to understand the effects of processing conditions and alloy compositions on the coating microstructure. …
-
High temperature oxidation behavior of [gamma]-Ni+[gamma]'-Ni3Al alloys and coatings modified with Pt and reactive elements
… dependence on the temperature and time in both pack cementation and post-heat-treatment processes. Meanwhile, coating performance was apparently more sensitive to the Hf content than what was observed with the alloys. Coating performance was also considerable affected by the surface finish and …