Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 170 for “"panel method"”.
-
Hull Shape Optimization for Wave Resistance Using Panel Method
… for optimizing ship hulls using iterative methods of design and modification. A method for calculating resistance for a given hull geometry and to optimize it using optimization algorithms are required for achieving better hulls. The resistance is calculated using a panel method for a given …
-
A Higher Order Panel Method With Vortex Particle Wake
Panel codes were some of the earliest methods for computing the flow around aircraft. Despite the availability of higher fidelity CFD methods, panel methods remain an essential tool for the development of modern aircraft, allowing engineers to quickly iterate during the conceptual design phase. …
-
Minimum pressure envelope cavitation analysis using two-dimensional panel method
… combines the speed and accuracy of high-order panel methods with fully-coupled viscous/inviscid interaction. XFOIL was altered such that it reads in command line arguments that provide operating instructions, rather than operator interaction via menu options. In addition, all screen output and …
-
An investigation of ground effect on airfoils using a panel method
… the aerodynamics of airfoil systems. A low-order panel method code called PMARC was used to study these characteristics. The results obtained from the panel method were compared with existing wind-tunnel and measured data for validity and to quantify PMARC's ability to model ground effects …
-
A Non-Linear Vortex Panel Method for Wings with Edge Separation
A global nodal vortex panel method is developed to predict steady aerodynamic loads on rectangular lifting surfaces with side edge separation. The lifting surface and free shear layers are modeled by bound and free vortex sheets respectively, which are then discretized into triangular bound and …
-
Evaluation of the NASA-Ames panel method (PMARC) for aerodynamic missile design
The NASA Ames Research Center developed panel code (PMARC) is investigated to explore its suitability for aerodynamic missile design. To this end, PMARC is first assessed by applying it to several problems for which other solutions and experimental data are available, i.e., steady flow past a …
-
An improved panel method for the prediction of performance of ducted propellers
… perturbation potential based lower order panel method is applied to the three dimensional problems of flow around ducts and ducted propellers. One significant development of this method is the application of full wake alignment scheme in which the trailing vortex wake sheets of the blades …
-
Aerodynamic Analysis of the NREL 5-MW Wind Turbine using Vortex Panel Method
The purpose of this study was to investigate if panel methods can be used to examine aerodynamic loads on wind turbine blades. Another aim was to find out the differences between the Lifting Surface Method, the Vortex Panel Method (a number of panels along the chord) and the Reduced Vortex Panel …
-
A vortex panel method for potential flows with applications to dynamics and controls
A general nonlinear, nonplanar unsteady vortex panel method for potential-flow is developed. The surface is modeled as a collection of triangular elements on which the vorticity vector is piecewise linearly varying. The wake emanates from the sides and trailing edges of the thin lilting surfaces …
-
A numerical model for two-dimensional unsteady flow calculations with a surface panel method
… by a finite set of combined source and vortex panels. The source strengths are prescribed to have the same magnitude as the normal relative velocity on the surface due to the freestream and motion of the airfoil. The vertex strengths on the airfoil surface are determined by applying a kinematic …
-
Support system interference on wall pressure in a wind tunnel using a panel method
… lift effects due to the presence of the walls. A panel method code, PMARC, was used to determine if the support system, consisting of a strut and sting and a bi-pod type support, influenced the static pressure measurements at the wall of the tunnel near the model position. The NACA 4412 airfoil …
-
Computation of the Aerodynamic Characteristics of a Subsonic Transport Aircraft Using a Panel Method
An advanced low-order panel method, VSAERO, is applied to a full-configuration transport aircraft. Wing pressure distributions as well as lift, drag, and pitching moment coefficients calculated for the full computational configuration are compared with experimental data. In addition, partial …
-
A Study of the Utilization of Panel Method for Low Aspect Ratio Wing Analysis
… of using a modified application strategy of panel method to analyze low aspect ratio wings at preliminary design phases. Conventional panel methods fail to capture the leading edge vortex (LEV) that is shed by wings with low aspect ratios, typically below 2 depending on planform. This …
-
A study of wind tunnel aerodynamic data correction with panel method and two-variable method
… of three portions. In the first portion, a panel method code, PMARC, has been modified to calculate wall interference effects using the improved test model representations. Two versions of the modified PMARC codes, MPMARC-1 and MPMARC-2, have been developed for wind tunnel wall interference …
-
A continuous vorticity panel method for the prediction of steady aerodynamic loads on lifting surfaces
A continuous vorticity panel method is developed and utilized to predict the steady aerodynamic loads on lifting surfaces having sharp-edge separation. Triangular and semi-infinite panels with linearly varying vorticity are used. The velocity field generated by an individual element is obtained in …
-
Modification of a vortex-panel method to include surface effects and allow finite-element interface
A vortex-panel method for potential flow is used as a basis for modeling surface effects and creating a finite-element interface so that an arbitrary body can be analyzed. The basic model consists of triangular panels of linearly varying vorticity which represent the body, vortex cores on the …
Page 1 of 9