Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 65 for “"passivation layers"”.

  1. Optimisation of low-dimensional materials for thermal management applications and novel passivation layers in devices

    … heterostructure approach to passivation of air-unstable layered material GaTe was investigated using graphene and h-BN as top or bottom encapsulation layers. Sandwiching GaTe between two graphene layers slowed the degradation of GaTe significantly, resulting in only a 17.6% …

    bristol Repository record for Optimisation of low-dimensional materials for thermal management applications and novel passivation layers in devices (opens in a new tab) Download PDF for Optimisation of low-dimensional materials for thermal management applications and novel passivation layers in devices (opens in a new tab)

  2. IMPROVED LONGEVITY OF ORTHOPEDIC IMPLANTS BY ADHESION OF PARYLENE C TO TITANIUM ALLOY PASSIVATION LAYERS VIA THE MULTICOMPONENT APPROACH TO SOLID SURFACE ENERGY

    … transitioning from metal to metal oxide during passivation, the surface changes from one in which only dispersion forces are possible to one in which dispersive and either polar or acid-base forces must be present. Matching these components of the surface/interfacial energy as a means of …

    mtu Repository record for IMPROVED LONGEVITY OF ORTHOPEDIC IMPLANTS BY ADHESION OF PARYLENE C TO TITANIUM ALLOY PASSIVATION LAYERS VIA THE MULTICOMPONENT APPROACH TO SOLID SURFACE ENERGY (opens in a new tab)

  3. Thermal stress and stress relaxation in copper metallization for ULSI interconnects

    … by FEA models. In order to characterize the Cu/passivation interface diffusivity, isothermal stress relaxations of Cu films and line structures were studied. The isothermal stress relaxation behaviors were shown significantly different for the films with different passivation layers, SiNx, SiC, …

    texas Repository record for Thermal stress and stress relaxation in copper metallization for ULSI interconnects (opens in a new tab)

  4. Adhesion of lacquers to tinplate

    … The latter exhibit weak bonding between the passivation layer and tinplate and on examining those areas of fracture surface where tinplate is revealed the fracture is seen to have propagated at this interface whereas those samples with good adhesion had failed near the lacquer-passivation …

    oxford Repository record for Adhesion of lacquers to tinplate (opens in a new tab)

  5. Passivation of the p-n junction edge in high-power semiconductor silicon devices /

    Thin dielectric passivation layer is one of the basic construction elements in semiconductor device technology. There are few materials, from which the layers may be manufactured. They are oxides mainly, with Si02 as the most popular of them, although, the phosphor- and boron-silicon glasses are …

    vilnius Repository record for Passivation of the p-n junction edge in high-power semiconductor silicon devices / (opens in a new tab)

  6. Didelės galios puslaidininkinių silicio prietaisų p-n sandūros krašto pasyvacija /

    Thin dielectric passivation layer is one of the basic construction elements in semiconductor device technology. There are few materials, from which the layers may be manufactured. They are oxides mainly, with Si02 as the most popular of them, although, the phosphor- and boron-silicon glasses are …

    vilnius Repository record for Didelės galios puslaidininkinių silicio prietaisų p-n sandūros krašto pasyvacija / (opens in a new tab)

  7. Degradation in next-generation passivating contact solar cells

    … instabilities by investigating the roles of passivation layers and processing conditions on these structures. In this thesis, by employing advanced hydrogenation techniques, heterojunction solar cells are investigated to understand their long-term stability. Using a combination of …

    unsw Repository record for Degradation in next-generation passivating contact solar cells (opens in a new tab)

  8. Development of Full-Area Passivating Contacts for Solar Cells Application

    … a cell concept, which based on a full-area passivation by Al2O3 or H:SiNx without local openings. On the one hand, such a passivating and non-conductive dielectric has to be thin enough to extract the photo current with lowest possible ohmic losses. On the other hand, the passivation has to …

    qucosa-diss

  9. New Application for Indium Gallium Zinc Oxide thin film transistors: A fully integrated Active Matrix Electrowetting Microfluidic Platform

    … To develop the robust IGZO TFTs, the different passivation layers deposited by RF [Radio Frequency] magnetron sputter are investigated by comparing the electrical characteristics of TFTs. The effects PECVD [Plasma Enhanced Chemical Vapor Deposition] of SiO<sub>2</sub> [Silicon Dioxide] …

    utk-theses Repository record for New Application for Indium Gallium Zinc Oxide thin film transistors: A fully integrated Active Matrix Electrowetting Microfluidic Platform (opens in a new tab)

  10. Effect of Layer Transfer and Plasma Etching on The Behavior of Transition-Metal Dichalcogenide Field-Effect Transistor Arrays

    … etching process. Few-layer structures (~ 3 monolayers) were fabricated using a dry etching process to thin multilayer (~ 60-90 nm thick) TMDC structures. Then, the effect of plasma etching of the TFT backchannel surface and bulk defects in the layers on the electrical performance and stability …

    waterloo Repository record for Effect of Layer Transfer and Plasma Etching on The Behavior of Transition-Metal Dichalcogenide Field-Effect Transistor Arrays (opens in a new tab)

  11. Photovoltaic Properties of the Gallium Arsenide-PEDOT:PSS Interface

    … interface. It has been found that chalcogenide passivation layers deposited from solution onto the GaAs surface did not improve device performance indicating that the passivation layer does not survive the PEDOT:PSS deposition. Small increases in pH of the PEDOT:PSS solution caused by the …

    oregon Repository record for Photovoltaic Properties of the Gallium Arsenide-PEDOT:PSS Interface (opens in a new tab)

  12. Investigations on the Stability Issues of Organic-Inorganic Hybrid Perovskite Solar Cells

    … how the choice of different metal oxide layers affect the charge transfer process as well as the stability of CH3NH3PbI3 (MAPI) perovskites. We compared the structure and electronic properties of MAPI based on TiO2, ZnO, and SnO2. Our calculation reveals the decomposition of …

    auckland-ms Repository record for Investigations on the Stability Issues of Organic-Inorganic Hybrid Perovskite Solar Cells (opens in a new tab)

  13. Design and development of group 13 precursors for improved vapour deposition of metal nitride thin films

    … Metal oxides and nitrides are used as passivation layers and as dielectrics, and due to the increasingly small sizes of microelectronic devices, their depositions must be precise, conformal, and of high purity. This work examines how precursor design can reduce impurities in deposited …

    carleton Repository record for Design and development of group 13 precursors for improved vapour deposition of metal nitride thin films (opens in a new tab)

  14. Mechanistic understanding of conditions required to establish and control geochemical passivation of pyrite

    … developed to reduce sulfide oxidation including passivation methods, chemical additives, and inhibition of growth of iron-oxidising bacteria. Among all methods, passivation is a low-cost and low-maintenance treatment option during which thin organic or inorganic protective coatings are formed on …

    adelaide Repository record for Mechanistic understanding of conditions required to establish and control geochemical passivation of pyrite (opens in a new tab)

  15. A scanning electron microscope study of the effects of anode velocity and current density on the corrosion of ship hull zinc in synthetic seawater

    … ribbonlike corrosion products, and anodic passivation layers are analyzed in static and dynamic environments and models for the sequential observations are developed. A model controlled by current density is offered for static conditions at low and moderate current densities, leading to …

    nps Repository record for A scanning electron microscope study of the effects of anode velocity and current density on the corrosion of ship hull zinc in synthetic seawater (opens in a new tab)

  16. Dynamics of Photogenerated Charge Carriers in III-V Bulk and Nanowire Semiconductors

    … In this thesis, a series of surface passivation methods are applied to lower the density of trap states and consequently improve the lifetime of photogenerated charge carriers in group III-V bulk and nanowire materials. We show that the GaNAs and AlGaAs passivation layers help to …

    lund Repository record for Dynamics of Photogenerated Charge Carriers in III-V Bulk and Nanowire Semiconductors (opens in a new tab) Download PDF for Dynamics of Photogenerated Charge Carriers in III-V Bulk and Nanowire Semiconductors (opens in a new tab)

  17. Incorporation of High-k HfO2 Thin Films in a-IGZO Thin Film Transistor Devices

    … into the TFTs, both as a gate insulator and a passivation layer. First, the HfO2 [hafnium oxide] films themselves are investigated through an annealing study and through I-V and C-V measurements. Then, HfO2 [hafnium oxide] is suggested as a replacement for commonly used SiO2 [silicon dioxide] …

    ut-knoxville Repository record for Incorporation of High-k HfO2 Thin Films in a-IGZO Thin Film Transistor Devices (opens in a new tab)

Page 1 of 4