Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 294 for “"peak current"”.
-
Study of Single Wires and X-pinches as X-ray Sources at Peak Current of 0.9-1.6 MA
… at the UNR Zebra generator with respective currents of 0.9 MA and 1.6 MA. SW loads are interesting because of their relative simplicity. They can be used to analyze aspects of Z-pinches that are not visible in multi-wire arrangements. X-pinch dynamics are unique when compared to other load …
-
Input-Pattern-Independent Estimation of Peak Current, Peak Power Dissipation, and Maximum Voltage Variation in the Power Distribution Network of VLSI Circuits
… the computation of maximum switching activity, peak current for programmable logic arrays (PLAs), peak current envelope for static circuits, maximum leakage current, and the maximum voltage variation in the power distribution network. Comparisons with the results obtained by exhaustive …
-
InAs/GaSb Tunnel Diodes
… with the TFET is the relatively low drive current density compared to that of a MOSFET. Increasing tunneling probability will increase drive current density. Determining the peak current density in a tunnel diode can give insight into the tunneling probability for the material system. This …
-
Electrochemical Studies of The Interaction Between DNA and a Compound Having Anticancer Properties.
… Our results showed an increase in the adsorption peak current and a negative shift of E1/2 in the oxidation of ferrocyanide on cysteamine and DNA modified electrodes. For the interaction between the DNA and the compound having anticancer properties, a decrease in peak current of the oxidation of …
-
Evolution of current mode control approaches for implementation in rapid capacitor charger technology
… power management parameters to these systems. Current mode control is seen as a desirable control method for the power inverter to quickly charge the capacitor bank. An analog current mode control platform has been demonstrated at the P3E (pulsed power and power electronics) Laboratory. …
-
Optically triggered thyristor for capacitor discharge applications
… with 522 V blocking voltage, 4.06 kA peak current and di/dt of 266.22 kA/ [mu]s and another one with 274.5 V blocking voltage, 3.94 kA peak current and di/dt of 664 kA/[mu]s. Both of these devices were in a realistic capacitor discharge circuit.
-
Bottom-Up High -Level Power Modeling and Estimation
… every input vector pair (energy per cycle) and peak-current for every input vector pair (peak current per cycle), for different logic styles. Another contribution of this research is automatic developments of these macromodels based on recursive least squares (RLS) algorithm. Due to simplicity …
-
Bottom-Up High -Level Current Macro-Models for Logic Blocks
… power-grid design and analysis requires a current macro-model for different logic blocks that are both easy to use and automatically constructed. The main contribution of this research is the development of current macro-models for combinational logic blocks in the frequency domain. The …
-
An evaluation of lightning flash characteristics using LDAR and NLDN networks with warm season southeast Texas thunderstorms
… network. This research focuses on relating the peak current and number of strokes in a negative flash (multiplicity) of lightning with the spatial extent and mean altitude of three-dimensional lightning in 1407 flashes as mapped by the LDAR network. It is shown that increasing negative …
-
An examination of the slow inactivation and resting inactivation of Kv1.5 and ShakerIR
… Ni²⁺ ions inhibit Kv1.5 channels by increasing current decay during a depolarizing pulse and reducing the peak current. A similarly accelerated current decay and reduced peak current amplitude have also been described in ShakerIR channels at low extracellular pH, and in the fast inactivating …
-
Barrel wear reduction in rail guns : an investigation of silver paste liquid-metal interface
… rail test section at 34 Å 19 m/s, while average current densities of 18-32 kA/cm2 was passed through the projectile - rail interface material. The specific objective is to examine rail and projectile damage at current densities near or above those (" 25kA/cm2) anticipated for a naval rail gun. …
-
The Effects of Different Types of Graphite and Ionic Liquids on the Properties of Carbon Paste Electrodes
… high replaceability, low cost and low background current. Starting from 1964, different forms of modifiers were applied to CPEs to improve the sensitivity and selectivity. Ionic liquids (ILs), which are organic salts with melting point below 100˚C with negligible volatility, low melting point, …
-
A voltammetric study of some heterocyclic mercaptans
… reaction was assessed from their sampled direct current (DC) polarograms, and it was found that each reaction was quasireversible in nature. The electrocapillary (EC) curves of 2MP and 2MP-0 indicated that the product of their corresponding electrode reactions (a mercury thiolate salt) was …
-
Simulating artificial lightning and composite damage
… gas) and has been idealised into four electric current waveforms of varying current and duration. Authors have almost exclusively modelled just one of the key lightning physics (plasma, thermal-electric, pressure or thermal-expansion), ignoring some important physical phenomena such as strain …
-
Fabrication and modeling of indium arsenide/aluminum antimonide resonant tunneling diodes
… and develop a computer model to predict the peak current voltage point. The second objective is to investigate the IV characteristics of RTDs with different types of interfaces.
-
Micro- and nano-electrode arrays for electroanalytical sensing
… recorded from the array became increasingly peak-shaped, due to merging of the diffusion fields of the individual electrodes. Furthermore, it was shown that the peak current densities obtained were largest for the arrays with the smallest individual electrodes, as were the signal-to-noise …
-
Study of Semiconducting Nanomaterials: Photoelectrochemistry and Dynamic Light Scattering
… tin oxide microelectrodes (FTO µE). We observed peak current transients with magnitudes of a few nA to 100 nA. The variation in the peak current magnitude is attributed to the detection of single NPs and of agglomerates of 100 nm to 1-2 µm diameter as supported by DLS measurements. Interestingly, …
-
Variable perturbation size maximum power point tracking algorithms for photovoltaic systems
… easy implementation. A P&O algorithm based on peak current control (PCC) and on the use of instantaneous sampled values to calculate the next perturbation can provide faster transient responses and small oscillations around the maximum power point (MPP) than when pulse width modulation (PWM) …
-
Phase Shift Modulation Techniques for Bidirectional Onboard Chargers in Electric Vehicles
… bidirectional OBCs are presented. It reviews the current industrial status, industrial applications, and future trends and challenges. A detailed overview of the promising topologies for bidirectional OBCs, including two-stage and single-stage structures, is also discussed in this thesis. …
-
High performance control of VRM circuits
… because of its ability to handle large load current and to achieve fast dynamic transient response under large step-load condition.The first part of this thesis fully investigates this issue for three popular control schemes used currently: Voltage Mode Control (VMC), Average Current Mode …
Page 1 of 15