Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"persistent slip bands"”.

  1. CHARACTERIZATION OF DEFORMATION HETEROGENEITY DURING CYCLIC LOADING OF POLYCRYSTALLINE MATERIALS USING CRYSTAL PLASTICITY

    … heterogeneous deformation. In cyclic loading, persistent slip bands (PSBs) have been studied since the late 1950s as a mechanism for void and crack formation in fatigued single crystals. Several models exist that offer an explanation for the formation of persistent slip bands. Of these, only a …

    cornell Repository record for CHARACTERIZATION OF DEFORMATION HETEROGENEITY DURING CYCLIC LOADING OF POLYCRYSTALLINE MATERIALS USING CRYSTAL PLASTICITY (opens in a new tab)

  2. Αυτοοργάνωση και στατιστική των εξαρμόσεων κατά τη μονότονη και κυκλική παραμόρφωση

    … for the cyclic deformation and the nucleation of persistent slip bands is developed where well-known experimental results reproduced in a good agreement.

    greece Repository record for Αυτοοργάνωση και στατιστική των εξαρμόσεων κατά τη μονότονη και κυκλική παραμόρφωση (opens in a new tab)

  3. A study of crack initiation in corrosion-fatigue of A.I.S.I 316 stainless steel by dynamic measurement of corrosion characteristics and corrosion current transients

    … transient depassivation of the surface at persistent slip bands, leaving ultimately to premature crack initiation. In conditions where the metal surface was active (transpassive) a mechanism is proposed, which involves the preferential dissolution at slip steps with resultant enhancement in …

    brunel Repository record for A study of crack initiation in corrosion-fatigue of A.I.S.I 316 stainless steel by dynamic measurement of corrosion characteristics and corrosion current transients (opens in a new tab)

  4. Fatigue damage accumulation in nickel base superalloys.

    … Fatigue damage occurred primarily as a result of persistent slip band formation, cell formation, Orowan looping and precipitate shearing. A small number of grains exhibited dislocation cells, normally associated with higher stacking fault energy materials. The number and width of persistent slip …

    whiterose Download PDF for Fatigue damage accumulation in nickel base superalloys. (opens in a new tab)

  5. Grain size effect on low cycle fatigue behavior of copper polycrystals

    … on the etched samples for the evidence of persistent slip bands (PSBs). (Abstract shortened by UMI.)

    manitoba Repository record for Grain size effect on low cycle fatigue behavior of copper polycrystals (opens in a new tab)

  6. A microstructure based fatigue life prediction framework and its validation

    … resolved shear stress, normal stress, slip-system length, and grain boundary character. In nickel-base superalloys, fatigue cracks tend to initiate near twin boundaries. The factors causing fatigue crack initiation depend on the material’s microstructure, the variability of which …

    purdue-thes Repository record for A microstructure based fatigue life prediction framework and its validation (opens in a new tab)

  7. Understanding the Micromechanism of Cyclic Loading Behavior of Ultrafine Grained Alloys

    … in the eutectic high entropy alloy deflected the persistent slip bands, responsible for fatigue cracking, thus resulted in delayed crack initiation and improved fatigue life. The selective nature of fatigue was learnt in the fine grain Al0.5CoCrFeNi, where the introduction of hierarchical features …

    unt Repository record for Understanding the Micromechanism of Cyclic Loading Behavior of Ultrafine Grained Alloys (opens in a new tab)

  8. Modelling the transition from channel-veins to PSBs in the early stage of fatigue tests

    <p>Dislocation channel-veins and persistent slip bands (PSBs) are characteristic dislocation configurations that are of interest to both industry and academia. However, existing mathematical models are not adequate to describe the mechanism of the transition between these two states. In this …

    oxford Repository record for Modelling the transition from channel-veins to PSBs in the early stage of fatigue tests (opens in a new tab)

  9. The onset of gouging in high-speed sliding contacts

    … prior to galling and gouging were deformation bands that resembled persistent slip bands on the rail surface. Another consistent feature was the transfer of slider material to the rail prior to galling and gouging. This suggests that gouging may not be triggered by micro-impact events, but by …

    texas Repository record for The onset of gouging in high-speed sliding contacts (opens in a new tab)

  10. Microstructures and mechanical behavior of multicomponent metallic-glass thin films

    … intrusions and extrusions normally formed at persistent slip bands on free surfaces could be suppressed by the metallic-glass thin films. The fatigue-resistance enhancement is mainly due to the lifetime extension during the fatigue-crack-initiation process. For the metallic-glasses films which …

    utk-theses Repository record for Microstructures and mechanical behavior of multicomponent metallic-glass thin films (opens in a new tab)

  11. Characterization of Nanostructured Metals and Metal Nanowires for Ultra-High Density Chip-to-Package Interconnections

    … the ease of crack initiation in nanomaterials. Persistent slip bands (PSBs) at an angle of 45o to loading axis are observed at higher strain ranges (> 1% for nc- Cu) with a width of about 50 nm. No relationship has been observed between PSBs and crack initiation. A non-recrystallization …

    gatech Repository record for Characterization of Nanostructured Metals and Metal Nanowires for Ultra-High Density Chip-to-Package Interconnections (opens in a new tab)

  12. Microstructural effects on fatigue damage evolution in advanced high strength sheet (AHSS) steels

    … academia and industry. Features known as the Persistent Slip Bands (PSBs) play an integral role in this damage evolution. Therefore, PSBs have been the focus of a lot of science-based investigations over the years. However, most existing studies in this area are restricted to analysis of PSBs …

    gatech Repository record for Microstructural effects on fatigue damage evolution in advanced high strength sheet (AHSS) steels (opens in a new tab)

  13. Thermal fatigue of austenitic and duplex stainless steels

    … formation. Cracks were seen to initiate from persistent slip bands (PSBs) and in 3RE60 from MnS inclusions. In duplex stainless steels the phase boundaries retarded crack growth markedly. In the austenitic stainless steels, the fracture surfaces of thermal fatigue cracks showed extensive …

    aalto Repository record for Thermal fatigue of austenitic and duplex stainless steels (opens in a new tab)

  14. Micro-scale fatigue mechanisms in metals: an in situ high frequency experimental approach

    … of precipitates. Also, for the first time, persistent slip bands (PSB) were observed in pure nickel in micron-scale single crystals. However, the number of cycles to PSB nucleation was two orders of magnitude higher than those in bulk crystals, which was attributed to the high …

    jhu Repository record for Micro-scale fatigue mechanisms in metals: an in situ high frequency experimental approach (opens in a new tab)

  15. Linking Enhanced Fatigue Life to Design by Modifying the Microstructure

    … a coarse-grained, dual-phase high entropy alloy, persistent slip bands formed in FCC matrix during cyclic loading due mainly to the slight composition change that affects the SFE in the FCC matrix and eventually alters the deformation mechanism. Another way known to alter an alloy's work hardening …

    unt Repository record for Linking Enhanced Fatigue Life to Design by Modifying the Microstructure (opens in a new tab)

  16. Fatigue Behavior of A356 Aluminum Alloy

    … tests highlight the important role played by persistent slip bands (PSBs) in fatigue crack initiation. At room temperature, cracks initiate along PSBs in the absence of other defects/stress risers, and grow transgranularly. Their propagation is retarded when they encounter grain boundaries. …

    unt Repository record for Fatigue Behavior of A356 Aluminum Alloy (opens in a new tab)

  17. Fatigue modeling of U720 – A multi-scale approach in understanding grain boundary effects on crack initiation

    … are used to obtain the energy barriers for slip nucleation and transmission across various GB characters, which are used to service our fatigue model. In this study, we construct a model for prediction of fatigue crack initiation based on the material’s microstructure. Our approach is to …

    uiuc Repository record for Fatigue modeling of U720 – A multi-scale approach in understanding grain boundary effects on crack initiation (opens in a new tab)

  18. Optimization of the mechanical properties of the metallic components by micro-surface structuring and the improvement of the fatigue behavior

    … mechanisms in the crystal structure especially persistent slip bands and twinning deformations. Thus, the surface protection of Ti implants through the selection of proper materials is very promising technology to improve their long-term stability and performance safety. Improving the mechanical …

    freiburg-diss Repository record for Optimization of the mechanical properties of the metallic components by micro-surface structuring and the improvement of the fatigue behavior (opens in a new tab)

  19. Cyclic Characterisation and Plasticity Modelling of AM30 Magnesium Alloy Extrusion

    … hysteresis loops suggest the predominance of slip and twinning/de-twinning mechanisms below and above the strain amplitude of 0.5%, respectively. The twinning/de-twinning occurrence is found to be more extensive during straining along ED, which results in higher asymmetry of hysteresis loops, …

    waterloo Repository record for Cyclic Characterisation and Plasticity Modelling of AM30 Magnesium Alloy Extrusion (opens in a new tab)

  20. Characterization and Modeling of Forged ZK60 Mg Alloys under Quasi-static and Fatigue Loadings

    … amplitudes, corresponding to the HCF regime, persistent slip bands (PSB) and second-phase intermetallic particles were defined as the major causes of crack initiation, whilst at high strain amplitudes, ascribed to the LCF lives, the interactions between twin-twin bands besides twin-dislocation …

    waterloo Repository record for Characterization and Modeling of Forged ZK60 Mg Alloys under Quasi-static and Fatigue Loadings (opens in a new tab)

Page 1 of 2