Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 73 for “"phase margin"”.
-
Correlation of transient and frequency responses by use of phase margin
… purpose of this investigation was to show that phase margin can be used to correlate transient and frequency response characteristics, primarily the resonant frequency peak and the transient peak overshoot. Using the electric analog computer, numerous servo systems were simulated. The resonant …
-
PID CONTROL : PERFORMANCE AND ROBUSTNESS
… an approximation of the industrial process. Gain margin and phase margin are traditional measures of robustness. Designing a PID controller to meet gain and phase margin specification is a well-known design technique. If the gain and phase margin are not specified carefully then the design may not …
-
PID controller tuning methods for process industry applications
… techniques based on the relay experiment and the Phase-Locked Loop methods of nonparametric system identification, through to the implicit modelling techniques of subspace identification and the model-free methods used in Iterative Feedback Tuning. For a given range of gain and phase margins, …
-
Controller Modeling and Stability Analysis of Multiple Input Single Output DC-DC Converter
… such as overshoot, undershoot, rise time, phase margin and gain margin were measured to evaluate and analyze the stability of the converter. These metrics were measured with the original model including the current sharing network that allows load sharing between multiple MISO modules. The …
-
AUTOMATIC TUNING OF PROCESS CONTROLLERS : PRACTICAL APPROACHES
… analytical tuning formulas based on gain margin and phase margin are derived. These analytical formulas are particularly useful in the context of adaptive control and auto-tuning where the controller parameters have to be computed on-line. Unlike other analytical formulas, the desired …
-
Application of iterative feedback tuning
… during the relay experiment to give specified phase margin and bandwidth. Goodtuning performance according to the specified phase margin and bandwidth can be obtained and the limitation of the standard relay auto-tuning technique using a version of the Ziegler-Nichols formula can be eliminated.
-
Stability and Performance Comparisons of Infinite Impulse Response Digital Filters with Rounded Coefficients
… proposed filter, a calculation of the gain and phase margin, a calculation of the filter's bandwidth and ripple, and plots of filter performance. The program also determines the maximum amount of rounding the filter coefficients will tolerate before driving the system to instability, while …
-
Modern Design of Classical Controllers
… When classical specifications such as gain margin, phase margin, bandwidth, and time-delay tolerance are imposed, the achievable performance can be easily determined graphically. The objective of this research is to determine the controller gains, contained in the stabilizing set, which …
-
Ultra Low Power Cap-Less LDO with Fast Startup
… at no load and -42dB at full load. The no load phase margin of the ldo is 28 Deg and gain margin of 20dB. The full load phase margin is 54 degrees and gain margin of 30dB. Quiescent current consumption of the ldo is 47uA and standby current consumption is 7uA (bias currents not included:7uA) …
-
Synthesis of PID controller from empirical data and guaranteeing performance specifications.
… is prepared.For the performance specifications, phase margin is considered first since it is avery significant factor to examine the system’s nominal stability extent (nominal performance). Second, satisfying H norm constraints is handled to make a more robustclosed loop feedback control system. …
-
Deterministic lead/lag compensator and iterative learning controller design for high precision servo mechanisms
… expression of the controller for a given phase margin. This design could be performed with only knowledge of the frequency response of the plant. To improve performance, ILCs (Iterative Learning Controllers) were used to compensate for the non-linearities. Previous cycle learning (PCL), …
-
Two-Stage Operational Amplifier Design by Using Direct and Indirect Feedback Compensations
… performance which has a 70dB DC gain, a 60◦ phase margin, a 25MHz gain bandwidth, and a slew rate of 20 V/us requirements. All the designs and simulation results are based on a 180mm 1.8 V standard TSMC CMOS technology. Ultimately, the traditional Miller compensated Op-Amp (a single …
-
Design of high speed 1:4 demultiplexer for optical communication systems
… frequency range from 1 a?? 2.5 GHz with a large phase margin, and consumes 137 mA from a 2.08V power supply. The other is a 10-Gb/s 1:4 Demultiplexer (DEMUX) circuit which has been implemented in a 0.25-um SiGe:C BiCMOS process. A two-level series gating differential emitter-coupled logic is used …
-
Design of a Low Power External Capacitor-Less Low-Dropout Regulator with Gain-Compensated Error Amplifier
… to boost the LDO’s transient response. The phase margin of the proposed LDO is 55◦ at 1 mA and 79.27◦ at max load (100 mA). Figure of merit (FOM) of this work is 2.79 fs which is very small.
-
Correlated Double Sampling Assisted Capacitance to Digital Converter
… amplifier that provides high gain and phase margin. The readout front-end acts as an offset and gain calibrating stage with high noise suppression. This design aims at improving energy consumption of Capacitance to digital converters in comparison with conventional architectures. The …
-
Adaptive resonant mode control for high frequency tonal noise
… requires no design iterations and the gain margin can be specified ahead of time (phase margin is always infinite). This controller differs from standard resonant control in that it acts directly on a disturbance rather than damping resonant poles of the system plant. This allows for a notch …
-
Stabilizability and dominant pole placement by PID controllers
… tuning method for dominant pole placement and phase margin specification is also proposed. Thirdly, guaranteed dominant pole placement with PID controllers is achieved with two simple and easy methods, based on the Root-Locus and Nyquist plot respectively. Fourthly, a new design method for …
-
Contributions to the modeling of the incremental optical encoder and speed estimation methods for motion control
… The small-signal model demonstrates that the phase lag of the encoder increases as the speed and the resolution decreases. This increment of the delay adversely reduces the phase margin of the motion control-loop. In addition, a simple lead compensator is proposed and implemented on a DSP to …
-
A Pre-Search Assisted ILP Approach to Analog Integrated Circuit Routing
… the post-layout performance (such as gain and phase margin) from our method is close to that of manual design. Our method also outperforms a previous work of automated analog IC routing.
Page 1 of 4