Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 73 for “"photoconductor"”.

  1. Sensitization of an oxadiazole derivative as an organic photoconductor

    The sensitization and the spectral sensitization of the photoconductivity of an organic derivative, 2,5-bis (p-diethyl-aminophenyl) - 1,3, 4-oxadiazole, was studied once an electrostatic sensitometer had been built. Among 27 dyes tested representing 8 different classes, only the triarylmethane-type …

    rit Repository record for Sensitization of an oxadiazole derivative as an organic photoconductor (opens in a new tab)

  2. Derivation of Some Photoconductive Properties of a Photoconductor Under Various Excitation Conditions

    … which photo-excitation can occur is known as the photoconductor. The increase of the electric conductivity induced by the photoexcitation in the photoconductor is known as the photoconductivity. The energy "E" and hence the wavelength of the impinging light required for inducing photo-excitation …

    marquette Repository record for Derivation of Some Photoconductive Properties of a Photoconductor Under Various Excitation Conditions (opens in a new tab)

  3. Characterization of molecular semiconductor and multilayer molecular organic photoconductor interfaces by photoelectrochemistry and surface analytical techniques.

    Organic semiconductor thin films are of interest to us for a variety of molecular electronic applications, including solar cells, chemical sensors, and nonlinear optical devices. We have been seeking unusual new ways of controlling the composition and long-range molecular structure of these …

    arizona-thes Repository record for Characterization of molecular semiconductor and multilayer molecular organic photoconductor interfaces by photoelectrochemistry and surface analytical techniques. (opens in a new tab)

  4. Electrical properties of amorphous selenium based photoconductive devices for application in x-ray image detectors

    … and its alloys due to their application as photoconductor materials in the new fully digital direct conversion flat panel x-ray medical image detectors. For a number of reasons, the a-Se photoconductor layer in such x-ray detectors has to be operated at very high electric fields (up to 10 …

    sask Repository record for Electrical properties of amorphous selenium based photoconductive devices for application in x-ray image detectors (opens in a new tab)

  5. Comparative Performance Evaluation of Conventional and Folded Detector Structures for X-ray imaging

    X-ray photoconductor-based flat-panel X-ray imagers (FPXIs) produce superior X-ray image as compared to scintillator-based detectors and are the commercially available digital X-ray detectors for mammography. These detectors are, at present, under scrutiny for use in general radiography, …

    concordia Download PDF for Comparative Performance Evaluation of Conventional and Folded Detector Structures for X-ray imaging (opens in a new tab)

  6. Modeling of x-ray photoconductors for x-ray image detectors

    … flat panel x-ray image sensors based on using a photoconductor with an active matrix array provide excellent images. These image sensors are suitable for replacing the present day x-ray film/screen cassette to capture an x-ray image electronically, and hence enable a clinical transition to …

    sask Repository record for Modeling of x-ray photoconductors for x-ray image detectors (opens in a new tab)

  7. Thickness dependence of electron transport in amorphous selenium for use in direct conversion flat panel X-ray detectors

    … (a-Se) was first commercialized for use as a photoconductor in xerography during the middle of the twentieth century. Since then the hole transport properties of a-Se have been studied extensively, however the study of electron transport remains relatively limited. Flat panel digital X-ray …

    sask Repository record for Thickness dependence of electron transport in amorphous selenium for use in direct conversion flat panel X-ray detectors (opens in a new tab)

  8. Monte Carlo modeling of the sensitivity of x-ray photoconductors

    … reduction or ghosting mechanism of x-ray photoconductor is studied based on Monte Carlo simulation techniques. We have calculated the sensitivity reduction for different detector operating conditions (applied electric field, x-ray spectrum and photoconductor thickness) and for different …

    sask Repository record for Monte Carlo modeling of the sensitivity of x-ray photoconductors (opens in a new tab)

  9. Modeling of resolution of x-ray imaging detectors

    … selenium (a-Se) is currently the best choice of photoconductor for clinical x-ray image detectors. Spatial resolution in terms of modulation transfer function (MTF) is an important metric to examine the image quality of a detector. Based on current understanding for diagnostic energy x-rays, the …

    concordia Download PDF for Modeling of resolution of x-ray imaging detectors (opens in a new tab)

  10. Device Architectures for Improved Temporal Response with Amorphous Selenium Radiation Detectors

    … is a commercially mature direct conversion photoconductor capable of very high spatial resolution that enables the early detection of small and subtle lesions in breast cancer screening and diagnostics. However, a-Se exhibits poor collection efficiency due to low carrier mobility and charge …

    waterloo Repository record for Device Architectures for Improved Temporal Response with Amorphous Selenium Radiation Detectors (opens in a new tab)

  11. Monte Carlo Simulation of Time of Flight Transient Photocurrents in High Resistivity Semiconductors with Shallow and Deep Traps: Effects of Photoinjection Strength, Duration and Absorption Depth

    … (a-Se) alloys are currently used as x-ray photoconductors in modern digital direct conversion flat panel detectors. Time-of-flight (TOF) transient photoconductivity technique is widely used in the characterization of a-Se alloy photoconductors for quality control. Using MATLab as a modeling …

    sask Repository record for Monte Carlo Simulation of Time of Flight Transient Photocurrents in High Resistivity Semiconductors with Shallow and Deep Traps: Effects of Photoinjection Strength, Duration and Absorption Depth (opens in a new tab)

  12. THE MATHEMATICAL MODELING OF TIME-DEPENDENT PHOTOCONDUCTIVE PHENOMENA IN SEMICONDUCTORS.

    … to the mathematical modeling of semiconductor photoconductors and includes the formulation, analysis, and solution of photoconductive device model equations. The fundamental semiconductor device equations of continuity and transport are derived for the case of a material which contains a large …

    arizona-thes Repository record for THE MATHEMATICAL MODELING OF TIME-DEPENDENT PHOTOCONDUCTIVE PHENOMENA IN SEMICONDUCTORS. (opens in a new tab)

  13. A performance analysis of a direct-conversion digital X-ray imager

    … properties and the dimensions of the X-ray photoconductor employed within such imagers. Five possible X-ray photoconductors are considered in this analysis, namely amorphous selenium, cadmium zinc telluride, mercury iodide, lead iodide, and thallium bromide. The collected charge per unit …

    ubc Repository record for A performance analysis of a direct-conversion digital X-ray imager (opens in a new tab) Download PDF for A performance analysis of a direct-conversion digital X-ray imager (opens in a new tab)

  14. Simulation study of monolithic 8-12 micron GaAs/AlGaAs multiple quantum well infrared image sensor

    … GaAs/AlGaAs multiple quantum well (MQW) photoconductor integrated with a GaAs MESFET readout circuit. The readout MESFET's are located in the top layer of the MQW so that a relatively standard GaAs MESFET design and processing technology can be used. The theoretical feasibility of such a …

    njit Repository record for Simulation study of monolithic 8-12 micron GaAs/AlGaAs multiple quantum well infrared image sensor (opens in a new tab)

  15. NEGATIVE DIELECTRIC CONSTANT OF PHOTO-CONDUCTING POLYMERS UPON CORONA-CHARGING

    … properties of a commercially available photoconductor as a result of Corona charging were studied. Various techniques including vacuum deposition and step-function impedance spectroscopy were employed, to overcome the nature of the photoconductor that prevented the use of conventional …

    mcmaster Repository record for NEGATIVE DIELECTRIC CONSTANT OF PHOTO-CONDUCTING POLYMERS UPON CORONA-CHARGING (opens in a new tab)

Page 1 of 4