Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 91 for “"photocurable"”.

  1. PHOTOCURABLE HYDROGELS FOR TISSUE ENGINERING APPLICATIONS

    L'abstract è presente nell'allegato / the abstract is in the attachment

    poli-torino Repository record for PHOTOCURABLE HYDROGELS FOR TISSUE ENGINERING APPLICATIONS (opens in a new tab)

  2. Photocurable Inorganic-Organic Hydrogels for Biomedical Applications

    There are two primary objectives of this dissertation research. The first objective was to prepare a library of inorganic-organic hydrogels from methacrylated star polydimethylsiloxane (PDMSstar-MA) and diacrylated poly(ethylene oxide) (PEO-DA) with tunable chemical and physical properties for use …

    tamu Repository record for Photocurable Inorganic-Organic Hydrogels for Biomedical Applications (opens in a new tab)

  3. Bio based photocurable polymers for advanced applications

    … chemical functionality, and was integrated into photocurable systems and additive manufacturing technologies. The first part of the thesis introduces the fundamentals of photopolymerization, photocurable polymer systems, and their role in additive manufacturing, with a focus on the challenges and …

    cagliari Repository record for Bio based photocurable polymers for advanced applications (opens in a new tab) Embargoed

  4. Development of photocurable pillar arrays formed via electrohydrodynamic instabilities

    As photolithography approaches both fundamental and economic barriers, interest in alternative patterning technologies has grown. This thesis focuses on two alternative patterning techniques: nanoimprint lithography (NIL) and electric field assisted assembly. NIL is a high resolution, yet …

    texas Repository record for Development of photocurable pillar arrays formed via electrohydrodynamic instabilities (opens in a new tab)

  5. LCD 3D Printing of a Photocurable Elastomer for Tissue Engineering

    … form of PGS using photoinitiator to become a photocurable resin suitable for liquid crystal display (LCD) 3D printing. PGSA was selected because its rheological and crosslinking behavior (and hence its mechanical properties) can be controlled by changes in curing time, temperature, and …

    sdstate Repository record for LCD 3D Printing of a Photocurable Elastomer for Tissue Engineering (opens in a new tab)

  6. Characterization of photocurable networks in real-time and post-exposure

    Several novel characterization techniques were developed to gain a molecular-level understanding of the effects of exposure intensity and exposure time on photopolymer network formation. These techniques enable detailed characterization of photopolymer behavior in real-time and post-exposure. In …

    vt Repository record for Characterization of photocurable networks in real-time and post-exposure (opens in a new tab)

  7. Additive Manufacturing And Synthesis Of Advanced Antibacterial And Sensing Photocurable Polymer Nanocomposites

    … and UV control systems are implemented for photocurable resin systems to synthesize and manufacture up to 14 novel nanocomposites. These novel nanocomposites are synthesized to improve tensile strength, wear resistance, water contact angle, antibacterial resistance, and heat dispersion. …

    oklahoma-thes Repository record for Additive Manufacturing And Synthesis Of Advanced Antibacterial And Sensing Photocurable Polymer Nanocomposites (opens in a new tab)

  8. Electrochemical Characterization of Photocurable and Layer-By-Layer Assembled Ferrocene-Modified Linear Poly(ethylenimine) Bioelectrodes

    New methods of constructing enzymatic bioelectrodes based on ferrocene-modified linear poly(ethylenimine) (LPEI) were explored with the intent of lowering device fabrication times. Redox polymers were synthesized and characterized for usage as both anode and cathode materials. Photolithography was …

    oklahoma-thes Repository record for Electrochemical Characterization of Photocurable and Layer-By-Layer Assembled Ferrocene-Modified Linear Poly(ethylenimine) Bioelectrodes (opens in a new tab)

  9. Characterization of curing kinetics and polymerization shrinkage in ceramic-loaded photocurable resins for large area maskless photopolymerization (LAMP)

    … slurry comprising a ceramic particle loaded photocurable resin. Curing of the resin is completed rapidly with exposures lasting 20~160ms. Three-dimensional parts are built layer-by-layer by sequentially applying and selectively curing resin layers of 25-100 micron thickness. In LAMP, …

    gatech Repository record for Characterization of curing kinetics and polymerization shrinkage in ceramic-loaded photocurable resins for large area maskless photopolymerization (LAMP) (opens in a new tab)

  10. Synthesis, development, and characterization of methacrylamide carboxylate agarose, combining its exploration as a photocurable bioink in the fabrication of elastic and tough 3D bioprinted structures

    … first demonstrates the development of a novel photocurable carboxylated agarose-based hydrogel (CAPA) whose degree of modification can be precisely controlled. Next, a new method that uses light to enhance microextrusion bioprinting of hydrogel-based bioinks, termed Light Assisted Printing by …

    freiburg-diss Repository record for Synthesis, development, and characterization of methacrylamide carboxylate agarose, combining its exploration as a photocurable bioink in the fabrication of elastic and tough 3D bioprinted structures (opens in a new tab)

  11. Digital Light Processing 3D printing of Thermosets via Reversible Addition-Fragmentation Chain Transfer Polymerization

    … with intricate structures. However, current photocurable resins for DLP printing are mainly based on uncontrolled radical polymerizations associated with limited control over formed networks and a high degree of heterogeneity in macromolecular structures. This uncontrolled process could only …

    unsw Repository record for Digital Light Processing 3D printing of Thermosets via Reversible Addition-Fragmentation Chain Transfer Polymerization (opens in a new tab)

  12. Studies of nontraditional high resolution thin film patterning techniques

    … replicates the relief pattern of a template in a photocurable liquid that has been dispensed on a substrate. The pattern is then crosslinked when the photocurable liquid is exposed to UV light through the template. In order to study the volume change in the created features upon exposure, a …

    texas Repository record for Studies of nontraditional high resolution thin film patterning techniques (opens in a new tab)

  13. Improving the Manufacturability of Active Microfluidic Devices using Stereolithography (SL)

    … are identified. A definite need to synthesize a photocurable PDMS resin for SL is established. The second part of the research develops a chemistry to synthesize photocurable PDMS resin for SL. A highly customized projection stereolithography system using open source electronics is constructed to …

    washington Repository record for Improving the Manufacturability of Active Microfluidic Devices using Stereolithography (SL) (opens in a new tab)

  14. CHITOSAN DERIVATIVES FOR TISSUE ENGINEERING

    … In our studies, we synthesized novel photocurable chitosans which possess great processibility compared to raw chitosan and can be fabricated into scaffolds with desired shape, pore size and topography upon light exposure. These photocured porous chitosan scaffolds showed great …

    clemson Repository record for CHITOSAN DERIVATIVES FOR TISSUE ENGINEERING (opens in a new tab)

  15. Synthesis and Assessment of Biobased Acrylated Epoxidized Soybean Oil Resins for Stereolithography 3D Printing of Microfluidic Devices

    … development and characterization of a biobased photocurable resin synthesized from soybean oil for use in stereolithography (SLA) 3D printing of microfluidic devices. The study explores a sustainable alternative to petroleum-based resins by performing an acrylation reaction on epoxidized soybean …

    gsu Repository record for Synthesis and Assessment of Biobased Acrylated Epoxidized Soybean Oil Resins for Stereolithography 3D Printing of Microfluidic Devices (opens in a new tab)

  16. Vat-Based 3D Printable Electroactive Polymer (EAP) Actuators

    … achieved by developing and exploring a range of photocurable resins and their applicability in 3D printing systems. Ionic EAPs are a promising field of study that has recently shifted towards additive manufacturing with advances in 3D printing technologies. Several current ionic EAP additive …

    auckland-ms Repository record for Vat-Based 3D Printable Electroactive Polymer (EAP) Actuators (opens in a new tab)

  17. Rheology and characterization of high-solids suspensions for direct ink writing of energetic materials

    … work, glass microspheres in polymer-solvent and photocurable monomer binders are examined as model systems to provide an in-depth study of polymer binder design. This work aims to understand how binder characteristics affect the viscosity and printability of such high-solids suspensions. We show …

    gatech Repository record for Rheology and characterization of high-solids suspensions for direct ink writing of energetic materials (opens in a new tab)

  18. 3D Printed Biodegradable And Shape Memory Polymer Poly(Glycerol Dodecanedioate) (PGD) For Soft Tissue Reconstruction

    … The overall goal of this thesis was to develop photocurable SMP resins, which could be used to 3D print patient specific medical devices without causing a significant inflammatory response in vivo. The first aim of this work was dedicated to the development of photocurable PGD. Through the use …

    gatech Repository record for 3D Printed Biodegradable And Shape Memory Polymer Poly(Glycerol Dodecanedioate) (PGD) For Soft Tissue Reconstruction (opens in a new tab)

Page 1 of 5