Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 44 for “"physical-layer network coding"”.

  1. Timing offset in physical-layer network coding

    Recent studies have shown that physical-layer network coding (PNC) can theoretically double the throughput of current wireless relay systems. That can be achieved by employing the network coding mechanism in the physical-layer such that multiple transmitted signals are allow to simultaneously …

    adelaide Repository record for Timing offset in physical-layer network coding (opens in a new tab)

  2. Physical-Layer Network Coding for MIMO Systems

    … and in turn boost the system throughput. The network can be studied using a simplified model, the two-way relay channel, where two parties exchange messages via the assistance of a relay in between. In such scenarios, this dissertation performs theoretical analysis of the system, and derives …

    unt Repository record for Physical-Layer Network Coding for MIMO Systems (opens in a new tab)

  3. An Algebraic Approach to Physical-layer Network Coding

    Physical-layer network coding (PNC) is a new approach to harnessing interference in wireless networks. Rather than avoiding interference or treating it as noise, PNC enables wireless relays to compute linear functions of the transmitted messages directly from the interfering signals. This allows …

    toronto-retro Repository record for An Algebraic Approach to Physical-layer Network Coding (opens in a new tab)

  4. Performance Evaluation of Optimized Physical Layer Network Coding

    With the development of the wireless networks these years, devices are required to have an even higher data rate, and thus the interference between devices remains a significant problem to be solved. In order to secure a reliable transmission with- out wasting network capacity, we would necessarily …

    whiterose Download PDF for Performance Evaluation of Optimized Physical Layer Network Coding (opens in a new tab)

  5. Physical-layer Network Coding for Cooperative Wireless Networks

    As a newly-emerged paradigm in the networking techniques, physical-layer network coding (PNC) [1, 5] takes advantage of the superimposition of the electromagnetic waves, and embraces the interference which was typically deemed as harmful, by performing exclusive-or mapping. Therefore, the spectral …

    whiterose Download PDF for Physical-layer Network Coding for Cooperative Wireless Networks (opens in a new tab)

  6. Parameter Estimation and Tracking in Physical Layer Network Coding

    … improving the performance of the wireless relay networks through the use of Physical Layer Network Coding (PLNC) techniques. The physical layer network coding technique allows two terminals to transmit simultaneously to a relay node and decode the modulo-2 sum of the transmitted bits at the …

    tamu Repository record for Parameter Estimation and Tracking in Physical Layer Network Coding (opens in a new tab)

  7. Design and Implementation of Physical Layer Network Coding Protocols

    There has recently been growing interest in using physical layer network coding techniques to facilitate information transfer in wireless relay networks. The physical layer network coding technique takes advantage of the additive nature of wireless signals by allowing two terminals to transmit …

    tamu Repository record for Design and Implementation of Physical Layer Network Coding Protocols (opens in a new tab)

  8. Physical layer network coding based on compute-and-forward

    … Compute-and-Forward is a type of lattice network coding which is deemed to avoid backhaul load and is therefore an important aspect of modern wireless communications networks. Initially we propose an implementation of construction D into Compute-and-Forward and investigate the …

    whiterose Download PDF for Physical layer network coding based on compute-and-forward (opens in a new tab)

  9. Physical Layer Network Coding for M-QAM MIMO Systems

    … is to design, implement and assess a practical Physical Layer Network Coding (PNC) scheme in multi-user massive Multiple-Input Multiple-Output (MIMO) systems utilizing M-ary Quadrature Amplitude Modulation (M-QAM). PNC is a new technology that is gradually becoming one of the most sought after, …

    essex Download PDF for Physical Layer Network Coding for M-QAM MIMO Systems (opens in a new tab)

  10. Physical layer network coding for the multi-way relay channel

    Wireless networks have received considerable attention recently due to the high user demand for wireless services and the emergence of new applications. This thesis focuses on the problem of information dissemination in a class of wireless networks known as the multi-way relay channel. Physical …

    uvic Repository record for Physical layer network coding for the multi-way relay channel (opens in a new tab)

  11. Noncoherent Physical-Layer Network Coding with Frequency-Shift Keying Modulation

    … times to avoid interfering with each other. Physical-layer network coding is a recent technique that improves throughput by allowing devices to transmit at the same time to the relay, deliberately interfering. This dissertation develops a system performing physical-layer network coding in the …

    wvu Repository record for Noncoherent Physical-Layer Network Coding with Frequency-Shift Keying Modulation (opens in a new tab)

  12. On Non-Binary Constellations for Channel Encoded Physical Layer Network Coding

    This thesis investigates channel-coded physical layer network coding, in which the relay directly transforms the noisy superimposed channel-coded packets received from the two end nodes, to the network-coded combination of the source packets. This is in contrast to the traditional multiple-access …

    waterloo Repository record for On Non-Binary Constellations for Channel Encoded Physical Layer Network Coding (opens in a new tab)

  13. Timing Synchronization at the Relay Node in Physical Layer Network Coding

    … nodes using a relay node. The introduction of physical layer network coding has improved the throughput efficiency of such an exchange. In practice, the reliability of information exchange using this scheme is reduced due to synchronization issues at the relay node. In this thesis, we deal with …

    tamu Repository record for Timing Synchronization at the Relay Node in Physical Layer Network Coding (opens in a new tab)

  14. Analysis and design of physical-layer network coding for relay networks

    Physical-layer network coding (PNC) is a technique to make use of interference in wireless transmissions to boost the system throughput. In a PNC employed relay network, the relay node directly recovers and transmits a linear combination of its received messages in the physical layer. It has been …

    unsw Repository record for Analysis and design of physical-layer network coding for relay networks (opens in a new tab)

  15. Physical-layer network coding for multiple-input multiple-output relay networks

    Physical-layer network coding (PNC) has attracted much attention in the past decade. The intuitive idea behind PNC is to exploit the network coding operation that occurs naturally in superimposed electromagnetic waves. In a two-way relay channel (TWRC), where two users exchange messages with the …

    unsw Repository record for Physical-layer network coding for multiple-input multiple-output relay networks (opens in a new tab)

  16. Improvement in Performance of Wireless Relay Nodes Using Physical Layer Network Coding

    Recent advancements in high data rate networks have led to a growing interest in improving performance of wireless relay networks through the use of Physical Layer Network Coding (PLNC) technique. In the PLNC technique, the relay node exploits the network coding operation that occurs naturally when …

    tamu Repository record for Improvement in Performance of Wireless Relay Nodes Using Physical Layer Network Coding (opens in a new tab)

  17. Two Applications of Physical Layer Network Coding in Multi-hop Wireless Networks

    Physical layer network coding (PNC) is a relatively new technique that can perform network coding at the physical layer to boost the capacity of wireless ad hoc networks. By viewing overlapping data transmissions as their linear combinations, PNC can potentially achieve large improvement in …

    calgary Repository record for Two Applications of Physical Layer Network Coding in Multi-hop Wireless Networks (opens in a new tab)

  18. Coding Schemes for Physical Layer Network Coding Over a Two-Way Relay Channel

    … bounds on the rates for reliable decoding at the relay. In the spirit of compute-and-forward, we present a multilevel coding scheme that permits reliable computation (or, decoding) of a class of functions at the relay. The function to be decoded is chosen at the relay depending on …

    tamu Repository record for Coding Schemes for Physical Layer Network Coding Over a Two-Way Relay Channel (opens in a new tab)

  19. Compute-and-Forward in Multi-User Relay Networks

    In this thesis, we investigate physical-layer network coding in an L × M × K relay network, where L source nodes want to transmit messages to K sink nodes via M relay nodes. We focus on the information processing at the relay nodes and the compute-and-forward framework. Nested lattice codes are …

    qucosa-diss

  20. Τεχνικές εκπομπής και λήψης σε ασύρματα ψηφιακά τηλεπικοινωνιακά συστήματα με χρήση δικτυωμάτων

    … (MIMO) systems, under maximum-likelihood (ML) decoding. A theoretical limit for the symbol error probability of general MIMO systems is introduced, which corresponds to the performance of an ideal MIMO system, which simultaneously exploits all the available degrees of freedom. This limit serves …

    greece Repository record for Τεχνικές εκπομπής και λήψης σε ασύρματα ψηφιακά τηλεπικοινωνιακά συστήματα με χρήση δικτυωμάτων (opens in a new tab)

Page 1 of 3