Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 88 for “"pinion"”.
-
A finite element analysis of pinion shaped spur gear teeth
An analysis of the effects of gear shaping with a pinion cutter upon the geometry and root stresses in external spur gears using the finite element method is given. The models analyzed have the shape of a ring with three teeth. The middle tooth is loaded and load sharing has been assumed. …
-
A simplified method for determining hob offset values in the design of nonstandard spur gears
… its normal cutting position such that when the pinion and gear are out they will operate at the required center distance when meshed together. The design problem, however, is trying to establish what values of cutter offset should be used to cut the pinion and the gear so that the standard …
-
Elastohydrodynamic Analysis of Spur Gears Using Load-Sharing Concept: Running-In and Steady-State
… lubricant layer formed between the teeth of the pinion and the gear cannot completely separate the surfaces and contact of asperities of the pinion and gear occurs. This case is usually referred to as mixed lubrication problem. In this research the load-sharing concept has been employed to …
-
A finite element study of bending stress variation in meshed spur gear pairs
… on the nodes around the bore hole of the driver pinion. The nodes around the bore hole of the driven gear (or the nodes along the back of the driven rack) were fixed. In order to transmit the power from the driver pinion to the driven gear (or rack), the points in contact were made coincident. …
-
The determination of hob offset design values for nonstandard spur gears
… determining the sum of the hob offsets for the pinion and gear has been shown by several authors, but there is no mathematical expression to separate the total hob offset into the individual hob offsets needed on the pinion and the gear. Several authors describe the advantages of designing gears …
-
Parametric Instability Investigation and Stability Based Design for Transmission Systems Containing Face-gear Drives
… are developed for face-gear drives with spur pinions to investigate the parametric instability behavior in great depth. The unique face-gear meshing kinematics and the fluctuation of mesh stiffness due to a nonunity contact-ratio are considered in these models. Since the system is periodically …
-
Design of Face-Milled Spiral Bevel Gear Drives with the Desired Conditions of Meshing and Contact by application of the Universal Motion Concept
… involves computing the corresponding conjugated pinion to the wheel that generates the desired shape and maximum level of the function of transmission errors. Then, the surface deviations necessary to achieve the desired contact path and extension of the contact pattern are computed. These …
-
Concept design of a portal gear reduction upright for F150 Raptor
… is to change the axle ratio for ring and pinion, but the downside to this solution is it increases the torque in all components downstream of the ring and pinion, including the ring and pinion system itself. To avoid this a portal gear reduction system can be used instead. In this solution …
-
Static and Dynamic Coefficient Measurements for a Thrust Collar Used in an Integrally Geared Compressor
… ratio between the low-speed shaft (LSS) and the pinion shaft is 11.67. The geometry of the shafts matches that of a typical IGC. Tests were conducted at pinion speeds of 5, 7.5, and 10 krpm and ???v?? = 200, 300, and 400 N. The resulting range of applied pressures is smaller than those arising in …
-
Computer Aided Optimal Design of Helical Gears
… helix angle and number of teeth on the pinion. The input for the selection phase includes the application environment, approximate center distance, minimum helix angle, desired values of gear ratio, pinion speed and the power to be transmitted. The limits on each of the design variables …
-
Life history, diversity and patterns of bat community structure in the Spring Mountains of southern Nevada
… elevation sites (Blackbrush and lower-elevation Pinion- juniper) than at higher-elevation sites (Pine-fur and higher-elevation Pinion-juniper). Because species turnover among macrohabitats was high, alpha diversity does not approximate regional (gamma) diversity, thereby illustrating that more …
-
Backpack Energy Harvester with Human Walking Model
… investigated, pure damping, traditional rack pinion energy harvester and our MMR based energy harvester. A comparison in the output power and human comfort between the three types of harvesters is discussed. However, the dual-mass model could not effectively represent human walking in real …
-
Vibration-Based Health Monitoring of Rotating Systems with Gyroscopic Effect
… set. In particular, a cracked shaft, a cracked pinion and a chipped pinion as well as a healthy gear system were created and tested in Adams. The contact force between the two gears was monitored and the 2D and 3D frequency spectrum, as well as the Wavelet Transform, were plotted in order to …
-
Analysis of Oil Lubricated Thrust Collars for Application in Integrally Geared Compressors
… single stage impellers installed on the ends of pinion shafts, all driven by a main bull gear (BG) and shaft system. When compared to single shaft multistage centrifugal compressors, the benefits of IGCs include better thermal efficiency, reduced footprint and simple foundation, dispensing with a …
-
Hypoid Gear Optimization
… approximation of the volume of the gear and pinion. The design variables selected are number of gear teeth, diametral pitch, and facewidth. The input parameters for starting the initial design phase are power to be transmitted, speed, gear ratio, type of application, mounting condition, type …
-
Modelagem dinâmica e avaliação do desempenho de atuação hidráulica de uma válvula submarina do tipo esfera visando o monitoramento da condição
… of a subsea ball valve, equipped with a rack and pinion spring return hydraulic actuator. The study considers the monitoring activity by the reading of the hydraulic actuation pressure on the control line, measured during the hydraulic actuation performance test. To this purpose, it was developed …
-
Development and control of electrified axle (eAxle) powertrains for all-terrain heavy-duty vehicles
… an over-the-shoulder configuration where the pinion-gear, used to drive the differential, is located on the opposite side to the motor and transmission. This enables the eAxle to be packaged more symmetrically on each side of its driveshafts, a key enabler for meeting tight vehicle wheelbase …
-
A Data Collection System for Future Automation Applications
… automate its inspection process for one of their pinion gears. Their current inspection process is both time and labour intensive and is subject to human error such as improper training or worker fatigue. To combat this issue, the manufacture wishes to automate the inspection process and integrate …
-
Contesting the commons: Race, ethnicity, class, occupation, and environment in Central Nevada, 1850-1880
… people who competed for control of the region's pinion pine trees generally fell into either of these categories, the labels of Indian and European grossly oversimplify the diversity within each group. Both Shoshone and Europeans comprised a variety of sub-groupings that utilized resources in a …
Page 1 of 5