Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 38 for “"plasma cleaning"”.
-
Hydrogen surface wave plasma cleaning of the EUV collector
… EUV light is generated by a laser-produced plasma as opposed to an excimer laser, bringing new challenges that must be overcome for the technology to be viable. One such challenge is the build-up of debris in the EUV source on the main optic (called the collector), reducing reflectivity and …
-
Design of a Monitoring System for a Plasma Cleaning Machine
Plasma cleaning is the most effective dry process to remove surface contaminates from a SAW (Surface Acoustical Wave) device. Consistent gas pressures, flows, and good electrical connections between the chamber shelves are necessary for the process to function predictably. In addition, operation of …
-
Innovative Conservation Technique for Bio-deteriorated and Soiled Ornamental Stone in Urban Areas: Laser versus Plasma Cleaning
L'abstract è presente nell'allegato / the abstract is in the attachment
-
Development of plasma cleaning and plasma enhanced close space sublimation hardware for improving CdS/CdTe solar cells
… To address this need a hollow-cathode plasma source was added to the load-lock region of the CSU single-vacuum in-line CdTe-cell fabrication system. This plasma source is used to clean the transparent-conductive-oxide layer of the cell prior to the deposition of the CdS and CdTe layers. …
-
Increasing Hydrophilicity and Transparency of Diamond-Like Carbon Thin Films with Dopants for an Anti-Fogging Laparoscope Coating
… assess the hydrophilic qualities of the films. Plasma cleaning was utilized as a surface treatment to improve hydrophilicity; time-studies were performed to assess the stability of this treatment. Raman spectroscopy, atomic force microscopy, and adhesion tests were performed to assess the …
-
Anode interfaces in all-solid-state batteries
… <strong>Chapter 5 e</strong>xplores plasma cleaning as a surface treatment technique to remove impurities from the air exposed surface of Na-β”-Alumina (NBA) solid electrolyte. Optimising conditions for the plasma treatment results in a relatively low interfacial resistance of NBA …
-
Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Process under Atmospheric and Low-pressure Conditions
… were fabricated via the solution precursor plasma spray process under atmospheric and low-pressure conditions. Firstly, Yb2O3 coatings were deposited via the solution precursor atmospheric plasma spray (SPAPS) process by an injection of Yb(NO3)3 solution into atmospheric plasma. The SPAPS …
-
Design and qualification of a robust polyurethane based conformal coating process for sodimms
… include board wash, ionograph test, masking, plasma cleaning, conformal coating spray, and cure. The board wash sub-process was qualified using three different temperature and time durations as inputs. When examined under a microscope, white residue was observed for lower temperature …
-
Characterization of Microwave Discharge Plasmas for Surface Processing
… two types of microwave (MW) discharge plasmas: a supersonic flowing argon MW discharge maintained in a cylindrical quartz cavity at frequency ƒ = 2.45 GHz and a pulse repetitive MW discharge in air at ƒ = 9.5 GHz. Low temperature MW discharges have been proven to posses attractive …
-
The cleaning of InP substrates for growth by MBE
… technique of using an in-situ ECR generated H-plasma to produce high quality surfaces on InP substrates, for growth of n- and p-type InP layers by GSMBE, has been investigated. The initial substrate surface quality determines the quality of the subsequently grown layers and therefore, the …
-
Development of Fabrication Process for Twisted Rhombohedral Trilayer-Bilayer Graphene Transport Devices
… metal evaporation. We find that increased O2 plasma cleaning and baking times of SiO2 wafers prior to and during exfoliation promotes the generation of large, pristine flakes with regions of both bilayer and trilayer graphene. Four devices were successfully fabricated using this methodology, …
-
Substrate cleaning using a remote hydrogen rf-plasma
… In this work, low temperature remote rf-hydrogen plasma cleaning of II-VI and silicon semiconductor surfaces was investigated as a preparation for subsequent deposition in molecular beam and gas source molecular beam epitaxy environments. The plasma was characterized using mass spectrometric …
-
Nanostructured Extremely Thin Absorber (ETA) Hybrid Solar Cell Fabrication, Optimization, and Characterization
… to commercially produced nanoparticles. Argon plasma cleaning has been investigated as a method to improve electronic behavior at cadmium selenide interfaces. The thermal anneal process for cadmium selenide nanoparticles has been studied, and a laser anneal process has been investigated. It has …
-
Gas evolution, conditioning, and electron emission properties of carbon fiber cathodes in a sealed reflex-triode vircator
… high power microwave (HPM) sources suffer from plasma expansion due to the outgassing of contaminants contained within electrode materials. Two cathode materials and three anode materials were examined in this study. The anode materials tested were nickel 201L (Ni201L), stainless steel 316L …
-
Time and spatially resolved spectroscopy during plasma etching of carbon surfaces
… to be resolved is the anomalous fast erosion of plasma-facing components due to plasma-surface interactions. The plasma-facing components are made of carbon-¯ber composites and these are etched away during fusion-plasma exposure. The etched hydrocarbons are redeposited on the reactor walls, …
-
Design and fabrication of ultraviolet light emitting diodes
… the sample. It was then mesa etched with Cla/Ar plasma to be able to provide electrical contacts to the n side of the diode. Electrical contacts were formed to the p and n sides, making use of photolithography, e-beam metal evaporator, oxygen plasma cleaning, wet etching and lift off processes. …
-
Surface wetting methods compatible with solid SERS substrates
… (2) addition of surfactants; (3) mild oxygen plasma cleaning; and (4) hydrophilic monolayers. The first two methods modify the solvent, and the last two modify the sensor surface. The general theoretical principles of surface wetting, as well as specific principles for each technique are …
-
In Situ Plasma Removal of Surface Contaminants from Ion Trap Electrodes
… construction and implementation of an in situ plasma discharge designed to remove surface contaminants from electrodes in an ion trapping experimental system is presented with results. In recent years, many advances have been made in using ion traps for quantum information processing. All of …
-
Advanced research deposition system (ARDS) for processing CdTe solar cells
… concepts for processing CdTe devices including, Plasma Cleaning, Plasma Enhanced Closed Space Sublimation (PECSS), Electron Reflector (ER) using Cd1-xMgxTe (CMT) structure and alternative device structures. The ARDS has been instrumental in the collaborative research with many institutions.
-
Plasma Wall Interactions and Recombination Coefficients Measurement on Yttrium-based Coated Chamber Wall Surfaces
Plasma etching is a widely used method to pattern materials in the fabrication of microelectronic devices. As the minimum feature sizes, or so-called critical dimensions, shrink beyond 14 nm, plasma etching processes need to be ever more tightly controlled. At low pressures, the ~cm mean free path …
Page 1 of 2