Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 29 for “"plasma material interaction"”.
-
Diagnostic Development and Plasma-Material Interaction Studies on the ZaP-HD Device
… Decoupling the power used to form the plasma from the power used to compress the pinch has resulted in temperatures and densities of 1~keV and $1\times10^{18}$~cm$^{-3}$ during quiescent periods of up to 60~$\mu$s. After demonstrating improved performance through the use of two power …
-
Characterization of ion properties in a linear pulsed plasma-material interaction test stand
… divertor regions of the magnetically confined plasma, tokamaks experience off-normal events in which high intensities of heat flux incident on wall component surfaces result in intolerable levels of damage. Proposed solid divertors will not be able to withstand these fluxes, especially in …
-
Design and Construction of Field Reversed Configuration Plasma Chamber for Plasma Material Interaction Studies
A Field Reversed Configuration (FRC) plasma source was designed and constructed to conduct high energy plasma-materials interaction studies. The purpose of these studies is the development of advanced materials for use in plasma based electric propulsion systems and nuclear fusion containment …
-
Advanced thermo-mechanical and plasma-material interaction characterization and testing methodologies of tungsten-based materials for neutron-relevant environments
Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2023-09-01 without embargo terms
-
Modeling enhanced impurity sputtering due to rf sheaths in front of ICRH actuators
… antenna. Here we present a semi-analytical fluid plasma model able to capture the enhanced sputtering yield from the Faraday Screen and the Plasma- Facing Components of an Ion Cyclotron Resonance Heating antenna in a fusion machine. The model is a one-dimensional phase-resolved model of a …
-
Methods for the analysis of low-Z plasma facing surfaces in magnetic fusion applications
… have led to considerable improvements in plasma density, temperature, and confinement time, research also suggests that materials selection in plasma-facing components (PFCs) can also have a substantial impact on plasma performance. Within the plasma-material interaction (PMI) community, …
-
Deposition of aluminum oxide by evaporative coating at atmospheric pressure (ECAP)
… and microelectronics. Recently, the Center for Plasma-Material Interaction (CPMI) has developed innovative coating method of Evaporative Coating at Atmospheric Pressure (ECAP). This new idea is an atmospheric-pressure based process. By using the thermal energy of plasma, solid aluminum are …
-
A plasma-wall interaction model for the erosion of materials under ion bombardment
Understanding the evolution and behavior of materials exposed to plasma is critical for the design of future electric propulsion devices. As ions are ejected from the device generating thrust, they also impact the ceramic walls. This induces wall erosion, ultimately exposing the magnetic circuit …
-
Divertor plasma conditions and their effect on carbon migration in the ASDEX Upgrade tokamak
… critical role in power and particle exhaust and plasma-material interaction in tokamaks. Of particular concern is the release of impurities from the material components, which reduces the lifetime of the vessel wall and affects the fusion performance. Furthermore, impurities with low charge …
-
Fusion Machine Scale Wall Material Erosion and Redeposition Modeled with GITR as a Part of an Integrated Simulation to Evaluate Tungsten Plasma Facing Component Lifetimes and Feedback on Fusion Plasmas
… a neutron source via fusion in a confined core plasma and extracting the necessary energy creates an adverse environment at the plasma-material interface. In order for the fusion reaction to be sustainable, the response of the coupled plasma-surface interaction must radiate in the edge plasma …
-
Two Photon Absorption Laser Induced Fluorescence for Fusion Class Plasmas
… many fusion systems. The edge region of fusion plasmas is strongly influenced by these neutral particles and is of growing importance because of the challenges of plasma material interaction. A two photon absorption laser induced fluorescence diagnostic at West Virginia University has been …
-
A Power Accounting Analysis of the Proto-MPEX Linear Device and Target Heat Flux Extrapolations to MPEX-based on Proto-MPEX discharges
<p>Plasma material interaction (PMI) studies are crucial to the successful development of future fusion reactors. Proto-MPEX is a prototype device whose primary purpose is to develop the plasma heating source concepts for the Material Plasma Exposure eXperiment (MPEX), a steady-state linear device …
-
Characterization of a Digital Holography Diagnostic for In Situ Erosion Measurement of Plasma-Facing Components in Fusion Devices
… over time from the heat flux of the high-energy plasma they generate. The ability to monitor the rate of surface modification is therefore imperative, but to date no proven technique exists for real-time erosion measurement of planar regions of interest on plasma-facing components in fusion …
-
Prompt vs Local Redeposition: Model Refinement and Experimental Design for Understanding High-Z Net Erosion in Magnetic Confinement Fusion
… significantly depends upon the optimization of plasma facing component (PFC) design. For high-Z PFCs, the critical engineering condition is minimal net erosion (i.e. gross erosion – redeposition). Here, we present a high-Z net erosion model discriminating three primary redeposition mechanisms: …
-
A transport study of high density helicon plasma discharges in the Prototype Material Plasma Exposure eXperiment
<p>The Prototype Material Plasma Exposure eXperiment (Proto-MPEX) at Oak Ridge National Laboratory is instrumental in demonstrating the plasma source capability for the steady-state MPEX facility to study plasma-material interactions (PMIs). Proto-MPEX has justified MPEX by examining the efficiency …
-
Ion Velocity Distribution Functions in Cutting-Edge Plasmas
Cutting-edge plasma experiments continue to push the frontiers of plasma science. Two such groups of experiments, helicon sources and laboratory magnetic reconnection, are the focus of this thesis. The relatively high plasma density achieved for modest input powers makes helicon source plasmas …
-
Impurity Production and Transport in the Prototype Material Plasma Exposure eXperiment
<p>The Prototype Material Plasma Exposure eXperiment (Proto-MPEX) is a linear pulse plasma device at Oak Ridge National Laboratory with the purpose of doing the research and development for the heating concepts on the planned full MPEX device. The goal of MPEX is to perform material studies at …
-
The Effects of Collisions on Plasma-Sheath Transition
The plasma sheath is essential for understanding the plasma-material interaction (PMI) since it regulates the plasma particle and energy fluxes to the wall. The key concept in sheath theory is the Bohm criterion that gives the lower bound of the plasma exit flow speed, also known as the Bohm speed. …
-
Erosion, deposition and material migration in the JET divertor with carbon and ITER-like walls
This study investigates erosion, deposition and material migration in the divertor of the fusion tokamak JET. Nuclear fusion provides a potential method for sustainable energy generation without large carbon emissions or long-term radioactive waste. Toroidal chambers with magnetic field coils known …
-
Development of high energy pulsed plasma simulator for plasma-lithium trench experiment
… lithium infused trench (LiMIT) device, a pulsed plasma source utilizing a theta pinch in conjunction with a coaxial plasma accelerator has been developed. An overall objective of the project is to develop a compact device that can produce 100 MW/m2 to 1 GW/m2 of plasma heat flux (a typical heat …
Page 1 of 2