Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"plastic failure"”.

  1. Mechanisms and control of mine floor heave.

    … Type I floor heave caused by buckling failure of floor, and the Type II floor heave caused by plastic failure and plastic flow of floor material. Based on the observation results, the mechanisms of floor heave are analyzed and the mechanical models for two types of floor heave are …

    wvu Repository record for Mechanisms and control of mine floor heave. (opens in a new tab)

  2. Strength characteristics of mortar filled steel tubes (short series)

    … but are considered in detail in this report. The plastic flow of concrete under load has also been noted previously but assumes very considerable importance in this present investigation. The effect of rate of load is investigated and finally the need for information on the plastic failure of …

    rice Repository record for Strength characteristics of mortar filled steel tubes (short series) (opens in a new tab)

  3. Πειραματική και υπολογιστική έρευνα των εντατικών καταστάσεων και μηχανισμών παραμόρφωσης-αστοχίας υπόγειων ανοιγμάτων σε αδύναμα υλικά

    … of the behavior mechanism using a double plastic mechanism elastoplastic model with pre-peak hardening and post-peak softening behaviour. A novel experimental approach was the extensive application of build-in strain gages, in order to cover the zone of interest around the opening, fully. …

    greece Repository record for Πειραματική και υπολογιστική έρευνα των εντατικών καταστάσεων και μηχανισμών παραμόρφωσης-αστοχίας υπόγειων ανοιγμάτων σε αδύναμα υλικά (opens in a new tab)

  4. Elastic-plastic analysis of complete building structures

    … details of a proposed method for the elastic-plastic failure load analysis of complete building structures are given. In order to handle the problem, a computer programme in Atlas Autocode is produced. The structures consist of a number of parallel shear walls and intermediate frames connected …

    aston Download PDF for Elastic-plastic analysis of complete building structures (opens in a new tab)

  5. Probabilistic analysis of the plastic collapse of random media

    … the reliability of an elastic/perfectly plastic continuous medium exhibiting randomly varying yield strength. Both the Tresca and Mohr-Coulomb yield criteria are considered in the present study. The two probabilistic methods developed are based on the upper and lower bound theorems of …

    rice Repository record for Probabilistic analysis of the plastic collapse of random media (opens in a new tab)

  6. Synthesis And Characterization Of PEEK Based Functional Composites For Biomedical Applications

    … with 10 vol% Ti3SiC2, Ti3AlC2 and MoAlB showed plastic failure, and higher strength than PEEK. Comparatively, PEEK reinforced with 10 vol% Cr2AlC did not show any enhancement. All the PEEK-MAX and PEEK-MoAlB composites showed triboactive behavior and enhanced wear resistance. The addition of …

    nodak Repository record for Synthesis And Characterization Of PEEK Based Functional Composites For Biomedical Applications (opens in a new tab)

  7. Atomistic Simulations of Defect Nucleation and Intralayer Fracture in Molybdenum Disulphide During Nanoindentation

    … the force - displacement curves corresponds to plastic deformation. It was hypothesized that the mechanism associated with plastic failure of MoS2 was the occurrence of broken bonds. However, it was proven that this initial plastic yield does not correspond to the occurrence of broken bonds in …

    arkansas Repository record for Atomistic Simulations of Defect Nucleation and Intralayer Fracture in Molybdenum Disulphide During Nanoindentation (opens in a new tab)

  8. Simulation of Collisions between RORO Vessels with Improved Double-Hull Designs - Influence of Modelling Parameters in Explicit Finite Element Analysis

    … the GL-approach describing a constant effective plastic failure strain, the PES-criterion describing a failure strain being dependent on sheet thicknesses of the shell model and mean edge lengths of the elements, and the RTCL-criterion accounting for triaxiality and introducing a damage variable. …

    chalmers Repository record for Simulation of Collisions between RORO Vessels with Improved Double-Hull Designs - Influence of Modelling Parameters in Explicit Finite Element Analysis (opens in a new tab)

  9. On constitutive modelling of fibre-reinforced composite materials

    … of rate-independent theory of orthotropic elastoplasticity. The constitutive equations so developed, are then superimposed using the classical lamination theory, to arrive at the governing response relations for multilayer laminates. The model invokes a 3-parameter quadratic yield surface and the …

    ubc Repository record for On constitutive modelling of fibre-reinforced composite materials (opens in a new tab) Download PDF for On constitutive modelling of fibre-reinforced composite materials (opens in a new tab)

  10. Inelastic material response in multi-physics earthquake rupture simulations

    … such as the ability of rocks to deform plastically. This dissertation extends the Arbitrary High Order Derivative Discontinuous Galerkin (ADER-DG) framework of the dynamic rupture software SeisSol to account for non-linear off-fault plasticity. The impact of plasticity on rupture …

    lmu-germany Repository record for Inelastic material response in multi-physics earthquake rupture simulations (opens in a new tab)

  11. BEHAVIOUR OF GRAVITY CAISSON ON SANDBED

    … selfweight to prevent sliding and tilting failure during the backfilling stage. Furthermore, the presence of rock-sill overlying the sandbed was found to be effective in reducing the magnitude of caisson horizontal displacements andincreasing the sliding stability of the caisson. Finally, …

    nus Repository record for BEHAVIOUR OF GRAVITY CAISSON ON SANDBED (opens in a new tab) Download file for BEHAVIOUR OF GRAVITY CAISSON ON SANDBED (opens in a new tab)

  12. Reliability-based Design Optimization of a Nonlinear Elastic Plastic Thin-Walled T-Section Beam

    … optimization (RBDO) approach to design elastic-plastic stiffener beams with Tsection. The objectives of this study are to evaluate the benefits of reliability-based optimization over deterministic optimization, and to illustrate through a practical design example some of the difficulties that a …

    vt Repository record for Reliability-based Design Optimization of a Nonlinear Elastic Plastic Thin-Walled T-Section Beam (opens in a new tab)

  13. Simplified numerical modelling strategies to assess tunnelling-induced damage to masonry buildings

    … major principal tensile strain distributions and plastic failure locations. As a result, the nonlinear EQFdc model can be considered a computationally efficient, intermediate complexity level tunnelling-induced damage assessment method that can be used as an additional assessment tool before …

    oxford Repository record for Simplified numerical modelling strategies to assess tunnelling-induced damage to masonry buildings (opens in a new tab)

  14. Investigating Alternative Testing Techniques for Evaluating the Environmental Stress Cracking Resistance of Polyethylenes in Contact with Ageing Fluids

    … is a significant problem that has plagued the plastics industry since its discovery nearly 70 years ago. The accelerated brittle failure brought about when a stressed polymer comes in contact with an aggressive environment can happen suddenly with destructive results. Many classes of polymers …

    mcmaster Repository record for Investigating Alternative Testing Techniques for Evaluating the Environmental Stress Cracking Resistance of Polyethylenes in Contact with Ageing Fluids (opens in a new tab)

  15. Updating Failure Probability of a Welded Joint Considering Monitoring and Inspection - For Offshore Wind Turbine Substructures

    … data are separately considered for updating failure probability of welded joints. Concerning crack inspection data, this thesis aims at finding advantages of using the fatigue assessment diagram (FAD) in the failure criteria for failure probability estimation and updating. The crack …

    liege Repository record for Updating Failure Probability of a Welded Joint Considering Monitoring and Inspection - For Offshore Wind Turbine Substructures (opens in a new tab) Download PDF for Updating Failure Probability of a Welded Joint Considering Monitoring and Inspection - For Offshore Wind Turbine Substructures (opens in a new tab)